
1 / 4 · Click to enlarge
AI Summary
The HC-06 6Pin Bluetooth Module Without Button adds wireless serial communication to microcontrollers via a 2.4GHz Bluetooth link. It connects directly to 3.3V logic and accepts 3.6-6V input, making it a simple drop-in solution for transparent data transfer.
Key Highlights
- 2.4GHz ISM band with GFSK modulation for reliable wireless serial data
- 10-meter operating range with Class 2 4dBm emission power
- 3.3V interface level connects directly to 51, AVR, PIC, ARM, MSP430
- Wide 3.6-6V input voltage with onboard 3.3V LDO regulator
- Compact 43 x 16.5 x 7 mm module weighs only 5 grams
- Full-duplex serial communication with transparent mode after pairing
Ideal For
- Arduino and microcontroller enthusiasts adding wireless serial
- Students learning Bluetooth communication protocols
- Makers building GPS or meter-reading systems
- Engineers prototyping remote sensor nodes
- DIY hobbyists needing a compact transparent serial bridge
Buying Tip
Remember to keep the input voltage between 3.6V and 6V (never exceed 7V) and set the baud rate via AT commands before pairing, as the default is 9600.
Elecvora expert review
Our verdict
The HC-06 6Pin Bluetooth Module Without Button is a dependable, no-frills serial bridge that works well for basic wireless data projects. Its wide voltage input and direct 3.3V/5V compatibility make it easy to integrate, though the lack of a button means configuration must be done via serial commands.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Direct connection to 3.3V and 5V microcontrollers
- Wide 3.6-6V input with onboard regulator
- Transparent serial mode after pairing
- Compact and lightweight design
Cons
- No button for easy mode switching or reset
- Only supports 8N1 serial format
- Requires AT commands for configuration
Best for
Beginners and makers adding Bluetooth serial to microcontroller projects
Not ideal for
Applications requiring dual-mode (master/slave) or advanced Bluetooth profiles
Specifications
| Item Type | HC Series Module |
|---|---|
| Switch/Button | No |
| Input current (mA) | 50 |
| Operating Range | 10 m |
| Operating Frequency (Hz) | 2.4GHz ISM band |
| Modulation Type | GFSK (Gaussian Frequency Shift Keying) |
| Emission power | 4dBm, Class 2 |
| Sensitivity (dBm) | -84dBm at 0.1% BER |
| Length (mm) | 43 |
| Width (mm) | 16.5 |
| Height (mm) | 7 |
| Weight (g) | 5 |
| Operating Temperature (°C) | -20 ~ +75 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 5 × 4 × 1 cm |
What's in the box
- 1 x HC-06 6Pin Bluetooth Module Without Button
Frequently Asked Questions
What is the default baud rate of the HC-06 module?
Can I connect this module directly to a 5V Arduino?
What is the input voltage range for the HC-06?
Does the module come with a button for pairing or reset?
What is included in the package?
What should I do if the LED keeps flashing?
Overview
The HC-06 6Pin Bluetooth Module Without Button is a compact wireless serial transceiver designed to add Bluetooth connectivity to microcontroller-based projects. It operates in the 2.4GHz ISM band using GFSK modulation and Class 2 emission power, delivering a reliable 10-meter operating range. The module provides a full-duplex serial port that, once paired, automatically switches to transparent mode, allowing data to pass between devices without needing to implement any Bluetooth protocol.
With a 3.3V interface level, the module can connect directly to a wide range of microcontrollers including 51, AVR, PIC, ARM, and MSP430 series. A 5V microcontroller can also be connected directly without additional level shifting or a MAX232 converter. The onboard 3.3V LDO regulator accepts input voltages from 3.6V to 6V, making it easy to power from common development boards and battery packs.
Key Features
- Wireless serial bridge: Full-duplex serial communication over Bluetooth with transparent mode after connection.
- Direct microcontroller interface: 3.3V logic level works with 51, AVR, PIC, ARM, and MSP430 directly; 5V microcontrollers also connect directly.
- Flexible power input: Onboard 3.3V LDO regulator accepts 3.6V to 6V, with a maximum input of 7V.
- Status LED: Flashing LED indicates no Bluetooth connection; steady LED indicates the port is connected and turned on.
- AT command configuration: Set baud rate (default 9600), name, and pairing password via AT commands when not connected; settings are saved after power-down.
- Compact and lightweight: 43 x 16.5 x 7 mm and only 5 grams, easy to embed in small enclosures.
Specifications Explained
Operating frequency and modulation: The 2.4GHz ISM band with GFSK modulation is standard for Bluetooth, providing robust interference resistance for short-range communication.
Emission power and sensitivity: 4dBm Class 2 output and -84dBm sensitivity at 0.1% BER give a balanced link for the specified 10-meter range, suitable for indoor and short-range outdoor projects.
Current consumption: The module draws approximately 50mA input current. When unpaired, current is about 30mA; when paired and communicating, it drops to around 8mA, helping preserve battery life in portable applications.
Voltage requirements: Input voltage must stay between 3.6V and 6V (never exceed 7V). The onboard 3.3V LDO provides a stable supply for the Bluetooth chip and sets the 3.3V interface level.
Communication format: Supports 8 data bits, 1 stop bit, no parity — the most common serial configuration. Other formats are not supported.
Compatibility and Requirements
The HC-06 module connects directly to microcontrollers with 3.3V logic, including 51, AVR, PIC, ARM, and MSP430 families. It also works with 5V microcontrollers without additional components. Configuration is done via AT commands over a serial connection; the default baud rate is 9600. The module supports Bluetooth V2.0 protocol standards and the Bluetooth serial port profile. A Bluetooth-enabled device (such as a computer with a Bluetooth adapter, PDA, or smartphone) is required to pair with the module.
Typical Uses
- GPS navigation systems requiring wireless data links
- Water, electricity, and gas meter reading systems
- Seamless connection between microcontrollers and Bluetooth adapters, PDAs, or computers
- DIY projects needing a transparent serial bridge over Bluetooth
- Remote sensor nodes and data loggers
What's in the Box
- 1 x HC-06 6Pin Bluetooth Module Without Button
Quick specs
- Item Type
- HC Series Module
- Switch/Button
- No
- Input current (mA)
- 50
- Operating Range
- 10 m
- Operating Frequency (Hz)
- 2.4GHz ISM band
- Modulation Type
- GFSK (Gaussian Frequency Shift Keying)













