
1 / 4 · Click to enlarge
AI Summary
The HC-06 is a 3.3V serial Bluetooth module that gives any UART-equipped board a short-range wireless link. It comes without a baseplate, so you can solder it straight into your own project.
Key Highlights
- Serial UART Bluetooth module for short-range wireless data links
- Bluetooth V2.0+EDR with frequency hopping for steadier 2.4GHz links
- 3.3V operation with a maximum current draw of about 40mA
- Default baud rate of 9600,8,1,n for straightforward serial setup
- Built-in antenna delivers signal coverage of up to 30ft
- Compact 27 x 13.2mm board weighing only 5g
Ideal For
- Hobbyists adding wireless serial links to microcontroller projects
- Students learning UART and Bluetooth communication
- Robotics builders needing a short-range control or data link
- Engineers prototyping computer peripherals and accessories
- Makers building battery-powered wireless devices
Buying Tip
Confirm your board's serial logic is 3.3V-compatible before wiring the module, and remember no baseplate or cables are included.
Elecvora expert review
Our verdict
A practical, low-cost way to add a short-range serial Bluetooth link to a UART-equipped board. It is simple to wire and power-efficient, but it is a bare module that expects you to handle connections and supply design yourself.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Straightforward UART interface works with many controllers
- Low 40mA maximum current suits battery-powered builds
- Built-in antenna and 30ft coverage cover small spaces
- Compact 27 x 13.2mm board weighs only 5g
Cons
- No baseplate, cables, or headers included
- Requires a regulated 3.3V supply and soldering or wiring
- Bluetooth V2.0 limits it to basic short-range serial links
Best for
Makers and students adding a simple wireless serial bridge to a 3.3V UART project
Not ideal for
Users wanting a plug-and-play module with headers and cables included
Specifications
| Item Type | HC Series Module |
|---|---|
| Bluetooth Version | 2 |
| Voltage Rating | 3.3 |
| Model No. / Name | HC-06 (without Baseplate) |
| Operating Voltage | 3.3V |
| Max. Operating Current (A) | 40mA |
| Default Baud Rate | 9600,8,1,n. |
| Signal coverage | 30ft |
| Length (mm) | 27 |
| Width (mm) | 13.2 |
| Weight (g) | 5 |
| Operating Temperature (°C) | -20ºC to +55ºC |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 4 × 4 × 1 cm |
What's in the box
- 1 x HC-06 Wireless Bluetooth Module without Baseplate
Frequently Asked Questions
What is the HC-06 module used for?
What voltage does it need?
What is the default baud rate?
Does it include a baseplate or cables?
What range can I expect?
What temperature range does it support?
Overview
The HC-06 is a serial port Bluetooth module designed to replace a wired UART link with a short-range wireless connection. It combines a 2.4GHz radio transceiver and baseband on a small board measuring 27mm by 13.2mm and weighing about 5g. This version is supplied without a baseplate, which keeps the footprint low and lets you solder or wire the module directly into your own circuit.
Because it communicates over a standard UART interface, the module can be paired with a wide range of controllers and processors that expose serial pins. It runs from a 3.3V supply and draws up to roughly 40mA, making it suitable for battery-powered builds where power budget matters.
Key Features
- Bluetooth V2.0+EDR radio with frequency hopping spread spectrum for reduced interference from other 2.4GHz devices
- Built-in antenna with signal coverage of up to 30ft
- Default serial setting of 9600,8,1,n
- 3.3V operating voltage and 40mA maximum operating current
- Compact 27 x 13.2mm board at approximately 5g
Specifications Explained
Voltage and current
The module is rated for 3.3V operation and a maximum operating current of 40mA. Check that your supply and signal levels match the module's 3.3V rating before connecting it to your controller.
Baud rate
The default serial configuration is 9600,8,1,n — 9600 baud, 8 data bits, 1 stop bit, no parity. Set your host device to the same values so the two ends can talk to each other.
Range
Signal coverage is listed at 30ft, which suits short-distance links within a room, workbench, or small robot.
Temperature
The module is rated for operating temperatures from -20°C to +55°C, covering typical indoor and sheltered project environments.
Compatibility and Requirements
The HC-06 connects over UART, so it can be interfaced with controllers and processors that provide a serial port. It works with USB Bluetooth adapters. You will need to provide a suitable 3.3V supply and make your own connections, since no baseplate or cable is included.
Typical Uses
- Hobby and educational electronics projects
- Robotics and remote control links
- Mobile phone accessories
- Computer peripherals and USB dongle projects
- Engineering prototypes and sports or leisure equipment
What's in the Box
1 x HC-06 Wireless Bluetooth Module without Baseplate. No baseplate, cables, or headers are included.
Quick specs
- Item Type
- HC Series Module
- Bluetooth Version
- 2
- Voltage Rating
- 3.3
- Model No. / Name
- HC-06 (without Baseplate)
- Operating Voltage
- 3.3V
- Max. Operating Current (A)
- 40mA













