Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A right angle HDMI female to male adapter that redirects a Raspberry Pi 3 HDMI port by 90 degrees for easier cable access in tight spaces. It supports resolutions up to 4Kx2K UHD, including 4096x2160 and 1080p.

Key Highlights

  • HDMI female to HDMI male right angle adapter
  • 90 degree design for tight or recessed HDMI ports
  • Supports up to 4Kx2K UHD, including 4096x2160 and 3840x2160
  • Also handles 2560x1600, 2560x1440, 1920x1200 and 1080p
  • Compact and lightweight for kits and travel
  • Designed with Raspberry Pi 3 compatibility in mind

Ideal For

  • Raspberry Pi 3 owners working with tight cases and enclosures
  • Makers and hobbyists who need a cleaner HDMI cable route
  • Users with wall-mounted or shelf-mounted displays
  • Anyone who wants a compact spare HDMI adapter for a kit
  • Setup builders dealing with crowded or recessed HDMI ports

Buying Tip

Check the direction of the 90 degree bend against your Raspberry Pi 3 case or enclosure before ordering, since a right angle adapter only helps if it points the cable where you have clearance.

Elecvora expert review

Our verdict

A simple, purpose-built adapter for Raspberry Pi 3 users who need the HDMI cable to exit at an angle instead of straight out. It covers UHD resolutions and does the job without drivers or extra power, provided the bend direction suits your enclosure.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Right angle 90 degree design helps in tight spaces
  • Supports up to 4Kx2K UHD resolutions
  • Passive adapter with no power or software needed
  • Compact and lightweight

Cons

  • Only one bend direction, so clearance must be checked
  • Package contents are not specified
  • No active signal conversion or extension beyond the physical connection

Best for

Raspberry Pi 3 setups with limited clearance around the HDMI port

Not ideal for

Users who need a long cable run or an active HDMI signal converter

Specifications

CompatibilityPi 3
Supportedup to 4Kx2K (UHD) including 4096x2160, 3840x2160, 2560x1600, 2560x1440, 1920x1200 & 1080p
HDMI OutputMale-Female Adapter Right Angle 90 Degree
Shipping Weight0.01 kg
Shipping Dimensions4 × 2 × 1 cm

Frequently Asked Questions

What does this adapter do?
It converts a male HDMI connection into a female HDMI port set at a 90 degree right angle, so a cable can approach the port from the side.
Is it compatible with Raspberry Pi 3?
Yes, the product data lists Raspberry Pi 3 compatibility. It uses a standard HDMI male-to-female connection.
What resolutions does it support?
It supports up to 4Kx2K UHD, including 4096x2160, 3840x2160, 2560x1600, 2560x1440, 1920x1200 and 1080p.
Does it need external power?
No. It is a passive HDMI male-to-female adapter and does not require a separate power supply.
What is included in the package?
Package contents are not specified in the product data, so confirm the included items with the seller before ordering.
How should I care for it?
Keep the adapter supported so cable weight does not strain the HDMI port, and avoid bending or pulling on the connector.

Overview

The HDMI Female to HDMI Male Right Angle Adapter for Raspberry Pi 3 is a small passive connector that changes the direction of an HDMI connection by 90 degrees. One end is a male HDMI plug that goes into the source device, and the other is a female HDMI port that accepts a standard HDMI cable. The right angle shape is the main point: it lets a cable approach the port from the side rather than straight out, which helps when the HDMI port is close to a case wall, enclosure edge or another connector.

Key Features

  • Male-to-female HDMI adapter with a right angle 90 degree layout
  • Supports up to 4Kx2K UHD, including 4096x2160 and 3840x2160
  • Also supports 2560x1600, 2560x1440, 1920x1200 and 1080p
  • Compact size suited to Raspberry Pi 3 setups and tight spaces
  • Lightweight, so it adds little bulk to a kit or travel bag

Specifications Explained

The connector type is the first thing to check: this is an HDMI female to HDMI male adapter, so it plugs into a device's HDMI output and gives you a female HDMI socket at a right angle. The 90 degree orientation is useful when a straight cable would press against a case or block nearby ports. Resolution support is listed up to 4Kx2K UHD, including 4096x2160, 3840x2160, 2560x1600, 2560x1440, 1920x1200 and 1080p, so it covers common display modes from full HD up to UHD. Because it is an adapter rather than an active converter, it simply extends the physical connection and does not change the signal format.

Compatibility and Requirements

The adapter is listed as compatible with Raspberry Pi 3. It works with HDMI connections and supports the resolutions stated above. No separate power supply, driver or software is required for a passive adapter of this type. Make sure the device you connect has a standard HDMI port and that your cable has a standard HDMI male plug to fit the female side of the adapter.

Typical Uses

Use it to route a display cable away from the side of a Raspberry Pi 3 when the board sits in a case or on a crowded desk. It is also handy for wall-mounted or shelf-mounted setups where a straight HDMI plug would stick out too far, and for keeping a spare adapter in a maker kit for quick changes between displays.

What's in the Box

Package contents are not specified for this listing. Check the product data or seller details before ordering if you need to confirm the exact included items.

Quick specs

Compatibility
Pi 3
Supported
up to 4Kx2K (UHD) including 4096x2160, 3840x2160, 2560x1600, 2560x1440, 1920x1200 & 1080p
HDMI Output
Male-Female Adapter Right Angle 90 Degree
Shipping Weight
0.01 kg
Shipping Dimensions
4 × 2 × 1 cm
See all specifications