
1 / 3 · Click to enlarge
AI Summary
The Hi-Link HLK-2M09 is a 2W AC-DC power module that delivers a regulated 9V DC output from a 100-240V AC mains input. Its ultra-compact PCB-mount design makes it easy to add a reliable 9V supply to space-limited projects.
Key Highlights
- Converts 100-240V AC to regulated 9V DC at up to 230mA
- Ultra-compact 30 x 16mm PCB-mount package weighs only 17g
- High efficiency with no-load loss below 0.1W
- Output overload and short-circuit protection built in
- Operates from -25°C to +60°C in 5-95% humidity
Ideal For
- Electronics hobbyists building mains-powered projects
- Smart home device developers needing a compact 9V supply
- Automation and control panel designers
- Instrumentation engineers requiring isolated power
- Makers creating space-constrained PCB designs
Buying Tip
Verify that your project's current draw at 9V stays below 230mA, and allow ventilation since the module relies on natural cooling.
Elecvora expert review
Our verdict
The Hi-Link HLK-2M09 offers a practical way to obtain a regulated 9V DC rail from mains in a very small package. Its wide input range and built-in protection make it a reliable choice for low-power embedded designs.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Ultra-compact and lightweight for easy PCB integration
- Wide 100-240V AC input suits global use
- Low no-load loss under 0.1W
- Output overload and short-circuit protection
- Wide operating temperature range
Cons
- Limited to 2W output, restricting load options
- Requires soldering and does not include connectors
- Natural cooling only, so enclosure ventilation is needed
Best for
Low-power electronics projects needing a compact 9V mains supply
Not ideal for
Applications requiring more than 2W or higher output current
Specifications
| Power Rating | 2W |
|---|---|
| Output Voltage | 9 |
| Output Current (mA) | 230 |
| Output Power (W) | 2 |
| Output Type | Single |
| Operating Temperature (°C) | -25 – +60 |
| Operating humidity | 5-95% |
| Length (mm) | 30 |
| Width (mm) | 16 |
| Weight (g) | 17 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 9 × 9 × 3 cm |
What's in the box
- Hi-Link HLK-2M09 9V/2W Switch Power Supply Module
Frequently Asked Questions
What is the input voltage range of the HLK-2M09?
What is the maximum output current?
Does the module include any connectors or a case?
Is the output isolated from the input?
What protection features are built in?
What are the operating temperature limits?
Overview
The Hi-Link HLK-2M09 is a plastic-encased, PCB-mounted isolated switching step-down power supply module. It accepts a wide AC input range of 100V to 240V and provides a single regulated 9V DC output capable of delivering up to 230mA, for a total power rating of 2W. This makes it a convenient building block for projects that need a low-power 9V rail derived directly from mains voltage.
Designed for space-sensitive applications, the module measures just 30mm in length and 16mm in width, and weighs approximately 17g. It combines high efficiency with low no-load power consumption (below 0.1W), helping to keep standby losses minimal in always-on devices.
Key Features
- Wide AC input: Works with 100-240V AC mains supplies, suiting equipment intended for international markets.
- Regulated 9V DC output: Provides a stable single output at up to 230mA (2W).
- Protection built in: Output overload and short-circuit protection help safeguard the module and downstream circuitry.
- Low standby loss: No-load consumption is under 0.1W, contributing to energy efficiency.
- Compact PCB-mount design: The small footprint allows direct soldering onto a printed circuit board.
- Wide operating conditions: Functions from -25°C to +60°C and in 5-95% relative humidity.
Specifications Explained
Power rating (2W): The maximum continuous output power is 2W, which sets the limit for connected loads. At 9V, this corresponds to a maximum current of about 230mA.
Output voltage (9V): The module provides a fixed 9V DC output, suitable for devices and circuits designed to run from a 9V supply.
Output current (230mA): The maximum current the module can deliver continuously is 230mA. Loads should be sized to stay within this limit for reliable operation.
Operating temperature (-25 to +60°C): The module can operate in ambient temperatures from -25°C to +60°C, covering many indoor and sheltered environments.
Dimensions (30 x 16mm) and weight (17g): The ultra-small size makes it easy to integrate into compact enclosures and densely packed PCBs.
Compatibility and Requirements
The HLK-2M09 is designed for PCB mounting and requires soldering to the host board. It needs an AC mains input within the 100-240V range and provides a single 9V DC output. Ensure that the connected load does not exceed 2W (230mA at 9V). The module is intended for integration by someone with electronics assembly experience; it is not a plug-and-play adapter and does not include connectors or a case beyond its own encapsulation.
Typical Uses
Thanks to its small size and wide input range, the HLK-2M09 is often used in smart home devices, automation and control systems, communication equipment, and instrumentation. It is also suitable for DIY electronics projects that need a compact 9V power source from mains, such as sensor nodes, relay boards, and small control panels.
What's in the Box
One Hi-Link HLK-2M09 9V/2W Switch Power Supply Module.

Quick specs
- Power Rating
- 2W
- Output Voltage
- 9
- Output Current (mA)
- 230
- Output Power (W)
- 2
- Output Type
- Single
- Operating Temperature (°C)
- -25 – +60
















