Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 40W isolated AC-DC module that converts 85-265VAC mains to a regulated 12V output at up to 3.3A. Its ultra-small encapsulated body and 3000VAC isolation make it a neat fit for space-limited embedded designs.

Key Highlights

  • 40W output: 12V DC at up to 3.3A
  • Wide 85-265VAC input for worldwide mains
  • 3000VAC isolation between input and output
  • Low ripple and noise, 100mVp-p or less
  • Encapsulated ultra-small body, about 57.5 x 33.5 x 23.8 mm
  • Built-in short-circuit and overcurrent protection with auto recovery

Ideal For

  • Embedded hardware developers needing a compact 12V mains supply
  • Smart home and IoT device builders
  • Industrial control and automation panel designers
  • Communication equipment and gateway projects
  • Makers replacing bulky open-frame supplies

Buying Tip

Check that your continuous 12V load stays under 3.3A and allow airflow around the module, since the 40W rating is the total limit for the whole unit.

Elecvora expert review

Our verdict

The HLK-40M12 packs a 40W isolated 12V supply into a very small encapsulated body, which is exactly what tight embedded builds need. It is a solid choice when you want mains-to-12V conversion without an external adapter, provided you respect the 3.3A limit and plan for heat.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very compact footprint for a 40W supply
  • Wide 85-265VAC input suits different mains voltages
  • 3000VAC isolation and low 100mVp-p ripple
  • Built-in short-circuit and overcurrent protection with auto recovery

Cons

  • Requires your own wiring, fusing and enclosure
  • Maximum continuous output is limited to 3.3A at 12V
  • No mounting hardware or connectors supplied

Best for

Compact embedded systems needing a 12V rail from mains

Not ideal for

High-current loads above 3.3A at 12V or outdoor mains wiring without an enclosure

Specifications

Shipping Weight0.080 kg
Shipping Dimensions7 × 6 × 5 cm

What's in the box

  • 1 x Hi-Link HLK-40M12 40W Ultra Small AC-DC Power Module 220V to 12V, 3300mA

Frequently Asked Questions

What input voltage does the HLK-40M12 accept?
It works from 85VAC to 265VAC, with a rated input of 100-240VAC at 1A, 50-60Hz. That range covers common mains voltages in different regions.
How much current can it supply at 12V?
The output is rated 12V DC at 3.3A, for a total of 40W. Keep your continuous load within that limit.
Is the output isolated from the mains?
Yes, the module provides 3000VAC isolation between the input and output sides. This helps separate the 12V circuit from the mains supply.
What happens during a short circuit or overload?
The module has built-in short-circuit and overcurrent protection with automatic recovery. Once the fault is removed, it should resume normal operation.
What is included in the package?
The package contains one Hi-Link HLK-40M12 40W AC-DC power module. Wiring, fuses, connectors and an enclosure are not included.
What temperature range can it operate in?
It is specified for -25°C to +60°C operation and -40°C to +80°C storage. Provide ventilation inside your enclosure to help manage heat.

Overview

The Hi-Link HLK-40M12 is a self-contained AC-DC switching power module built to deliver a stable 12V rail from mains electricity. It accepts anything from 85VAC to 265VAC, so the same part works on 100-240VAC supplies at 50-60Hz without a selector or external transformer. The output is rated 12V DC at 3.3A, giving 40W of usable power in a package that measures only about 57.5 x 33.5 x 23.8 mm and weighs around 68 g.

Because the circuit is encapsulated, the module tolerates moisture, dust and vibration better than an open board, and the 3000VAC isolation between input and output helps keep the low-voltage side separated from mains. Short-circuit and overcurrent conditions are handled internally with automatic recovery, so a fault does not normally require a manual reset.

Key Features

  • Wide input range: 85-265VAC covers low and high mains voltages.
  • Regulated 12V output: up to 3.3A continuous, 40W total.
  • 3000VAC isolation: separates mains input from the 12V output.
  • Low noise: ripple and noise of 100mVp-p or less.
  • Protected output: short-circuit and overcurrent protection with auto recovery.
  • Long service life: MTBF of 100,000 hours or more.

Specifications Explained

Input and output

The rated input is 100-240VAC at 1A, 50-60Hz, while the module still operates from 85VAC up to 265VAC. On the output side you get 12V DC at 3.3A. Plan your load so the continuous draw stays within that 3.3A figure, and remember that 40W is the ceiling for the whole module.

Isolation and noise

3000VAC isolation is the barrier between the mains side and the 12V side, which matters when the output feeds logic, sensors or user-accessible connectors. Ripple and noise at 100mVp-p or lower keeps the 12V rail clean enough for most control and communication circuits.

Thermal range

The module is specified for operation from -25°C to +60°C and storage from -40°C to +80°C. Give it ventilation inside the enclosure and avoid mounting it next to heat sources.

Compatibility and Requirements

The HLK-40M12 needs a mains AC supply within 85-265VAC and a load that draws no more than 3.3A at 12V. It is a bare module, so you must provide your own input and output wiring, fusing and enclosure. Solder or terminate the input and output pins according to your own build practice, and keep mains clearances on the input side.

Typical Uses

Common applications include smart home controllers, industrial automation boards, communication devices and other embedded systems that need a compact 12V supply from mains. It also suits prototype and retrofit work where an open-frame supply is too large.

What's in the Box

  • 1 x Hi-Link HLK-40M12 40W AC-DC power module, 220V to 12V, 3300mA

Quick specs

Shipping Weight
0.080 kg
Shipping Dimensions
7 × 6 × 5 cm
See all specifications