
1 / 6 · Click to enlarge
AI Summary
This HIFI DAC+ sound card adds high-resolution I2S audio output to your Raspberry Pi, supporting up to 384 kHz sampling with a 120 dB signal-to-noise ratio. It is ideal for building a network music player with Volumio or XBMC and includes LED status indicators.
Key Highlights
- I2S digital audio interface for low-jitter signal transfer
- Supports sampling rates up to 384 kHz
- 120 dB signal-to-noise ratio for quiet backgrounds
- Dynamic range of 112 dB preserves musical detail
- Two output interfaces for external amplifiers
- LED indicators show power and decoding status
Ideal For
- DIY audio enthusiasts building a Raspberry Pi network music player
- Users of Volumio or XBMC seeking better sound quality
- Makers adding high-resolution audio output to a project
- Anyone needing an I2S DAC with dual outputs for external amplifiers
Buying Tip
Check that your Raspberry Pi model has a 40-pin GPIO header and that you have a suitable case with an opening for the DAC board before purchasing.
Elecvora expert review
Our verdict
This DAC+ board delivers a noticeable improvement in audio quality for Raspberry Pi projects, with high-resolution support and a clean output. It is a solid choice for DIY streamers, though it requires basic assembly and configuration.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Supports high-resolution audio up to 384 kHz
- Very low noise and distortion for clear sound
- Dual outputs add flexibility
- Status LEDs simplify troubleshooting
Cons
- Raspberry Pi not included
- Requires software configuration for best results
- No enclosure included, so exposed board may need protection
Best for
DIY audio enthusiasts building a network music player
Not ideal for
Users wanting a plug-and-play sound card without setup
Specifications
| Item Type | Other Accs. |
|---|---|
| Sample Rate | 384 kHz |
| S/N Ratio (dB) | 120 |
| Dynamic Range (dB) | 112 |
| Distortion Factor (dB) | -93 |
| Operating Voltage (VDC) | 5 |
| Digital Audio Interface | I2S |
| Supported | Volumio Xbmc System |
| Length (mm) | 65 |
| Width (mm) | 56 |
| Weight (g) | 30 |
| Shipping Weight | 0.033 kg |
| Shipping Dimensions | 6 × 5 × 2 cm |
What's in the box
- 1 x HIFI DAC+ Sound Card with I2S Port for Raspberry Pi
Frequently Asked Questions
Is the Raspberry Pi included?
Which Raspberry Pi models are compatible?
What power supply does the DAC+ require?
What software can I use with this DAC+?
What do the LEDs indicate?
Can I connect an infrared remote?
Overview
The HIFI DAC+ Sound Card is a dedicated audio expansion board for Raspberry Pi. It connects via the I2S digital audio interface to deliver high-resolution sound, making it a practical choice for DIY network music players and audio projects. The board is built around a DAC chip that supports sampling rates up to 384 kHz, so you can play high-resolution audio files with excellent clarity.
With a signal-to-noise ratio of 120 dB and a dynamic range of 112 dB, the DAC+ is designed to produce a clean, detailed output. Two output interfaces are provided for connecting external amplifiers or other equipment, giving you flexibility when building your system. Onboard LEDs indicate power and working status, helping you confirm the board is operating correctly.
Key Features
- I2S digital audio interface: Ensures a direct, low-jitter connection to the Raspberry Pi for accurate audio data transfer.
- High-resolution support: Handles sampling rates up to 384 kHz, suitable for high-resolution audio libraries.
- Excellent signal-to-noise ratio: At 120 dB, background noise is minimised for quieter listening passages.
- Wide dynamic range: 112 dB dynamic range captures the full scale of your music, from soft to loud.
- Dual output interfaces: Connect external amplifiers or other audio devices with ease.
- Status LEDs: Red LED indicates power; green LED shows decoding activity.
- Infrared receiver interface: Supports remote control integration (occupies GPIO26).
Specifications Explained
Sample rate: Up to 384 kHz means the DAC can process high-resolution audio files, preserving fine detail and ambience. S/N ratio: 120 dB indicates a very low noise floor, so you hear more of the music and less hiss. Dynamic range: 112 dB allows the DAC to reproduce both subtle and loud passages without distortion. Distortion factor: -93 dB reflects very low harmonic distortion, keeping the sound clean. Operating voltage: 5 VDC, powered directly from the Raspberry Pi. Digital audio interface: I2S, a standard for high-quality audio transfer between digital devices.
Compatibility and Requirements
This DAC+ board is designed for Raspberry Pi models that support the I2S interface and the 40-pin GPIO header. It is compatible with audio playback systems such as Volumio and XBMC, allowing you to build a network music player. The board requires a 5 VDC power supply, which is normally provided by the Raspberry Pi itself. Note that the Raspberry Pi is not included and must be purchased separately.
Typical Uses
Use this DAC+ to upgrade the audio output of a Raspberry Pi-based music streamer, build a DIY hi-fi player with Volumio, or add high-quality sound to a media centre running XBMC. It is also suitable for custom audio projects that need an I2S DAC with multiple outputs.
What's in the Box
1 x HIFI DAC+ Sound Card with I2S Port for Raspberry Pi. Raspberry Pi not included.
Quick specs
- Item Type
- Other Accs.
- Sample Rate
- 384 kHz
- S/N Ratio (dB)
- 120
- Dynamic Range (dB)
- 112
- Distortion Factor (dB)
- -93
- Operating Voltage (VDC)
- 5













