Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact evaluation kit built on the Nordic nRF52810 SoC for prototyping BLE, ANT and 2.4GHz wireless designs. It packs a PCB antenna, configurable -20 to +4 dBm transmit power and AES hardware encryption into an 18 x 12 x 2 mm board.

Key Highlights

  • Nordic nRF52810 SoC with BLE, ANT and 2.4GHz support
  • Configurable transmit power from -20 to +4 dBm in 4 dB steps
  • On-board PCB antenna for a compact 18 x 12 x 2 mm footprint
  • Wide 1.7V to 3.6V input voltage range
  • AES hardware encryption built into the wireless stack
  • Supports 1 Mbps and 2 Mbps data rates in BLE

Ideal For

  • Firmware engineers prototyping BLE sensor nodes
  • Students learning embedded wireless development
  • Hardware teams evaluating the nRF52810 SoC
  • Makers building compact 2.4GHz devices
  • Product designers testing ANT and BLE roles

Buying Tip

Check that your programmer and toolchain support the nRF52810 SoC before ordering, since the kit ships as a bare evaluation board.

Elecvora expert review

Our verdict

A tidy, low-cost evaluation board that puts the Nordic nRF52810 SoC on a small PCB with an integrated antenna, making early wireless prototyping straightforward. It is best treated as a development starting point rather than a finished product.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Integrated PCB antenna saves RF layout work
  • Wide 1.7V to 3.6V supply range
  • Configurable -20 to +4 dBm transmit power
  • AES hardware encryption on chip
  • Very small 18 x 12 x 2 mm footprint

Cons

  • No programmer or cables included
  • Limited documentation beyond the datasheet
  • Bare board, so enclosure and headers are your responsibility

Best for

Engineers and students prototyping BLE, ANT and 2.4GHz designs

Not ideal for

Buyers wanting a plug-and-play finished wireless product

Specifications

Bluetooth VersionBLE
Voltage Rating1.7 to 3.6
Model No. / NameISC-nRF52810-A
Antenna TypePCB antenna
ChipsetnRF52810
Input Voltage (V)1.7V~3.6V
Dimensions (L x W x H) mm18x12x2mm
Wireless ConfigurationBLE5.3,ANT
Frequency2400MHz-2483.5MHz
Data Transfer Rate1-2Mbps
Wireless SecurityAES HWEncryption
Transmit Power (dBm)TxPower-20to+4dBmin4dBSteps
Operating ModeCentral/ Peripheral in BLE
Shipping Weight0.003 kg
Shipping Dimensions16 × 9 × 2 cm

What's in the box

  • 1 x IndieSemiC EVK-ISC-nRF52810-A Evaluation Kit board

Frequently Asked Questions

What SoC does this evaluation kit use?
It is built around the Nordic nRF52810 system-on-chip, with the module identified as ISC-nRF52810-A.
Which wireless protocols are supported?
The board supports BLE, ANT and 2.4GHz operation in the 2400MHz to 2483.5MHz band.
What supply voltage does it need?
The input voltage range is 1.7V to 3.6V, so a regulated supply within that window is required.
What is included in the package?
The package contains one EVK-ISC-nRF52810-A evaluation kit board; a programmer and cables are not listed.
Can I adjust the transmit power?
Yes, transmit power is configurable from -20 to +4 dBm in 4 dB steps.
Where do I find programming details?
Refer to the datasheet in the attachment section for pinout, tooling and firmware guidance.

Overview

The IndieSemiC EVK-ISC-nRF52810-A is an evaluation kit designed to help engineers and makers prototype wireless products around the Nordic nRF52810 system-on-chip. The board brings out the core building blocks needed for a working radio link: a PCB antenna, a configurable power amplifier, AES hardware encryption and support for BLE, ANT and 2.4GHz operation.

Because the module measures just 18 x 12 x 2 mm, it fits neatly into small enclosures and wearable-style prototypes, while the wide 1.7V to 3.6V supply range lets you power it from a variety of common sources.

Key Features

  • Nordic nRF52810 SoC with BLE 5.3, ANT and 2.4GHz wireless configuration
  • PCB antenna tuned for the 2400MHz to 2483.5MHz band
  • Transmit power adjustable from -20 to +4 dBm in 4 dB steps
  • 1 Mbps and 2 Mbps data transfer rates
  • AES hardware encryption for link security
  • Central and peripheral roles supported in BLE
  • Compact 18 x 12 x 2 mm module footprint

Specifications Explained

Transmit power: the -20 to +4 dBm range with 4 dB steps gives you fine control over range versus power draw, which matters in battery-powered designs.

Voltage: the 1.7V to 3.6V input window covers common single-cell and regulated supplies, so the board can be integrated into many existing designs without extra regulation.

Encryption: AES hardware encryption handles security operations in silicon rather than firmware, keeping the main processor free for application code.

Antenna: the integrated PCB antenna removes the need for an external RF connector or matching network during early prototyping.

Compatibility and Requirements

The kit is built around the Nordic nRF52810 SoC and supports BLE, ANT and 2.4GHz operation as listed. A regulated supply within 1.7V to 3.6V is required. For detailed pinout, firmware tooling and programming instructions, refer to the datasheet supplied in the attachment section.

Typical Uses

  • BLE peripheral and central role prototyping
  • ANT and 2.4GHz wireless experiments
  • Wearable and small-form-factor sensor nodes
  • Teaching and lab work on embedded wireless

What's in the Box

1 x IndieSemiC EVK-ISC-nRF52810-A Evaluation Kit board.

Quick specs

Bluetooth Version
BLE
Voltage Rating
1.7 to 3.6
Model No. / Name
ISC-nRF52810-A
Antenna Type
PCB antenna
Chipset
nRF52810
Input Voltage (V)
1.7V~3.6V
See all specifications