Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

An industrial grade analog pH sensor kit that measures 0-14 pH with ±0.01 accuracy and connects to Arduino through a PH2.0 analog interface. The BNC probe and 5V module make low-cost water quality monitoring straightforward.

Key Highlights

  • Full 0-14 pH measuring range with ±0.01 pH accuracy
  • 5V DC operation with a built-in power indicator LED
  • BNC probe connector plus PH2.0 analog interface for Arduino
  • Response time of one minute or less
  • 75 cm cable and 150 mm probe for flexible positioning
  • Compact 50 x 47 x 16 mm module in a foam-lined storage box

Ideal For

  • Makers building Arduino-based water quality monitors
  • Aquaculture keepers checking pond and tank pH
  • Students and educators running pH experiments
  • Hobbyists who need an affordable analog pH probe
  • Engineers prototyping simple pH logging setups

Buying Tip

Use a stable external 5V supply close to +5.00V and calibrate the probe before continuous use, since supply accuracy directly affects reading accuracy.

Elecvora expert review

Our verdict

A sensible low-cost entry into analog pH measurement, with a wide 0-14 range and fine ±0.01 accuracy in a compact Arduino-friendly module. It rewards careful power supply choice and regular calibration rather than plug-and-play convenience.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Covers the full 0-14 pH scale
  • ±0.01 pH accuracy suits detailed monitoring
  • Simple BNC and PH2.0 connections for Arduino
  • Compact module with power indicator LED
  • Foam-lined box protects the probe in storage

Cons

  • Requires calibration before continuous use
  • Not designed for long immersion periods
  • Accuracy depends on a stable supply close to +5.00V

Best for

Arduino users who need affordable, reasonably precise pH readings for water and aquaculture checks

Not ideal for

Applications needing continuous long-term immersion or a fully calibrated out-of-the-box meter

Specifications

Model No. / NamepH Sensor
Operating Voltage (VDC)5
Module Size (LxWxH) mm50 x 47 x 16
Measuring Current Range0 - 14 PH
Accuracy±0.01 pH
Response Time (uS)≤ 1min
Cable Length75
Sensor size150, Φ12 pH
Measuring Temperature (°C)0 - 50 ℃
Shipping Weight0.07 kg
Shipping Dimensions19 × 7 × 4 cm

Frequently Asked Questions

What pH range does this kit measure?
It measures the full 0-14 pH range, with a stated accuracy of ±0.01 pH.
Which controllers is it compatible with?
The kit is designed for Arduino controllers. The PH2.0 interface connects to an analog input port, and the module runs on 5V DC.
What power supply should I use?
Use an external switching power supply with a voltage as close as possible to +5.00V. A more accurate supply voltage supports more accurate readings.
Do I need to calibrate the probe?
Yes. The electrode should be calibrated before continuous use so the readings are meaningful.
Can the probe stay in liquid for long periods?
No. It is a laboratory probe and should not be immersed in liquid for too long at a time.
Will the probe colour match the photos?
The pH sensor colour may be black or green, but the function is identical either way.

Overview

The Generic Industrial Grade Analog pH Sensor Kit is a two-part measuring set: a glass pH probe and a small analog module that converts the probe signal into a voltage an Arduino can read. It covers the full 0-14 pH scale with ±0.01 pH accuracy, so it handles acidic, neutral and alkaline samples with the same setup. The module measures just 50 x 47 x 16 mm and runs from a 5V DC supply.

Connecting it is simple. The probe attaches to the module through a BNC connector, and the module's PH2.0 interface plugs into an analog input port on the controller. A power indicator LED confirms the board is energised, and the 75 cm cable gives you room to place the probe in the sample while keeping electronics dry.

Key Features

  • Wide range: reads from 0 to 14 pH, covering the full scale.
  • Fine resolution: ±0.01 pH accuracy for detailed readings.
  • Fast enough for monitoring: response time of one minute or less.
  • Simple wiring: BNC probe connection and PH2.0 analog output.
  • Status LED: power indicator shows when the module is active.
  • Portable storage: supplied in a compact plastic box with foam.

Specifications Explained

0-14 pH range means the kit is not limited to neutral water; it can be used for acidic and alkaline solutions across the whole scale. ±0.01 pH accuracy is fine enough to show small changes between samples, which matters when tracking water condition over time.

5V operation matches common Arduino logic levels, so no level shifting is needed. Response time of one minute or less keeps sampling practical for spot checks. The 0-50 °C measuring temperature sets the working window for the liquid being tested. The probe body is 150 mm long with a Φ12 profile, and the cable runs 75 cm.

Compatibility and Requirements

The kit is intended for Arduino controllers. The PH2.0 connector goes to an analog input, and the module needs a 5V DC supply. For the most accurate results, use an external switching power supply whose output is as close as possible to +5.00V, because a steadier supply voltage supports steadier readings. Calibration of the electrode is required before continuous use.

Typical Uses

  • Water quality testing in tanks, ponds and samples
  • Aquaculture monitoring
  • Arduino-based measurement and logging projects
  • Classroom and hobby experiments involving pH

What's in the Box

The kit is supplied in a compact plastic box with foam inserts for storage and transport. The pH probe colour may vary between black and green, but the function is the same.

Quick specs

Model No. / Name
pH Sensor
Operating Voltage (VDC)
5
Module Size (LxWxH) mm
50 x 47 x 16
Measuring Current Range
0 - 14 PH
Accuracy
±0.01 pH
Response Time (uS)
≤ 1min
See all specifications