Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This INGHAi electret condenser microphone measures just 6mm in diameter and 2.7mm high, operating from 1.5V to 10V at 0.5mA. Its 2.2kΩ impedance and −66dB sensitivity make it a compact, low-power audio pickup for DIY and repair projects.

Key Highlights

  • 6mm diameter and 2.7mm height for space-constrained designs
  • Wide 1.5V to 10V operating voltage range
  • Low 0.5mA current draw for battery-powered devices
  • 2.2kΩ impedance matches common audio input circuits
  • −66dB sensitivity for voice and general sound capture
  • Two-pin electret condenser element for through-hole mounting

Ideal For

  • Electronics hobbyists building custom audio circuits
  • Repair technicians replacing a 6mm electret microphone
  • Product developers prototyping compact voice capture
  • Makers integrating sound sensing into small devices
  • Students learning about microphone biasing and audio input

Buying Tip

Check that your circuit can supply a bias voltage between 1.5V and 10V and that the 2.2kΩ impedance matches your preamp input before ordering.

Elecvora expert review

Our verdict

A practical, no-frills electret microphone for compact low-power audio projects. It offers a useful balance of small size and standard electrical characteristics, though it requires basic circuit knowledge to implement.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very small 6mm diameter for tight spaces
  • Wide 1.5V–10V supply range
  • Low 0.5mA current consumption
  • Standard 2.2kΩ impedance

Cons

  • Requires external bias resistor and coupling capacitor
  • Sensitivity of −66dB may need a preamp for quiet sounds
  • Datasheet needed for exact pinout and application details

Best for

Compact DIY audio and repair projects

Not ideal for

High-fidelity or professional recording

Specifications

ManufacturerINGHAi
Voltage Rating1.5 to 10V
Sensitivity (dB)-66
Diameter (mm)6
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x INGHAi GMI6027-2C66DB electret condenser microphone

Frequently Asked Questions

What is the operating voltage range of this microphone?
The microphone operates from 1.5V to 10V DC. Ensure your circuit's bias supply stays within this range.
How much current does it draw?
It draws approximately 0.5mA, making it suitable for low-power and battery-operated designs.
What is the sensitivity of this microphone?
The sensitivity is −66dB, which is typical for compact electret condenser elements and suitable for voice and general sound pickup.
Does it come with a datasheet?
Yes, a detailed datasheet is available in the Attachments section of the product page for full electrical specifications.
What is included in the package?
The package includes one INGHAi GMI6027-2C66DB electret condenser microphone element.
How should I connect it in a circuit?
Connect one pin to the positive bias supply through a resistor (typically around 2.2kΩ) and the other to ground. Use a coupling capacitor to feed the signal to your audio input. Refer to the datasheet for exact pin identification.

Overview

The INGHAi GMI6027-2C66DB is a miniature electret condenser microphone element built for compact electronic audio applications. At only 6mm in diameter and 2.7mm in height, it fits into tight enclosures where larger microphone capsules cannot go. The element operates from a 1.5V to 10V supply and consumes just 0.5mA, making it well suited to low-power circuits and battery-operated devices. Its 2.2kΩ impedance is compatible with many common audio input stages, and the −66dB sensitivity provides a usable output for voice and general sound pickup.

Key Features

  • Compact footprint: 6mm diameter and 2.7mm height allow integration into small devices.
  • Flexible power: Works across a 1.5V to 10V range for design versatility.
  • Low current draw: 0.5mA typical current helps preserve battery life.
  • Standard impedance: 2.2kΩ output impedance suits many microphone preamp circuits.
  • Electret condenser design: Provides stable sensitivity without an external polarizing voltage.

Specifications Explained

Voltage rating (1.5V to 10V): This is the supply range the microphone needs to operate correctly. Ensure your circuit provides a voltage within this window, typically through a bias resistor.

Sensitivity (−66dB): This figure indicates the output level relative to a standard reference. A −66dB rating is common for compact electret microphones and is suitable for close-talking or general ambient sound capture.

Impedance (2.2kΩ): The output impedance should match the input impedance of your preamplifier or recording circuit for best signal transfer. Many consumer audio inputs are compatible with this value.

Current consumption (0.5mA): The low current draw means the microphone adds minimal load to your power supply, which is important for portable and battery-powered designs.

Diameter (6mm): The small capsule size makes it easy to mount in handheld devices, headsets, or embedded systems.

Compatibility and Requirements

This microphone requires a bias voltage within the specified 1.5V to 10V range, usually supplied through a resistor in the circuit. It has two connection pins and is intended for through-hole soldering. No additional components are included; you will need to integrate it into your own circuit or replace an existing microphone of similar specifications. Always consult the manufacturer datasheet for detailed electrical characteristics and application notes.

Typical Uses

  • DIY intercom and voice recording projects
  • Replacement microphone for headsets and small audio devices
  • Embedded audio sensing in toys and gadgets
  • Prototyping voice-activated circuits
  • Repair of devices using a 6mm electret capsule

What's in the Box

One INGHAi GMI6027-2C66DB electret condenser microphone element.

Quick specs

Manufacturer
INGHAi
Voltage Rating
1.5 to 10V
Sensitivity (dB)
-66
Diameter (mm)
6
Shipping Weight
0.001 kg
Shipping Dimensions
1 × 1 × 1 cm
See all specifications