Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A tiny 6.0 x 2.7 mm electret condenser microphone capsule rated 1.5 to 10V with 2.2kR impedance and -64dB sensitivity. It gives compact audio and sensor builds a low-current microphone solution that runs from a small DC supply.

Key Highlights

  • Miniature 6.0 mm diameter, 2.7 mm height electret capsule
  • Wide 1.5 to 10V operating range for flexible biasing
  • 2.2kR impedance suits common microphone input circuits
  • -64dB sensitivity rating for level planning
  • Low 0.5mA current draw eases battery-powered designs
  • Supplied as a single bare component for custom builds

Ideal For

  • Electronics hobbyists building compact audio circuits
  • Repair technicians replacing a failed microphone capsule
  • Product designers prototyping small voice pick-up modules
  • Makers adding sound sensing to microcontroller projects
  • Students learning about electret microphone circuits

Buying Tip

Check the manufacturer datasheet for the pin layout and recommended bias circuit before soldering, since this is a bare capsule with no wiring or connector included.

Elecvora expert review

Our verdict

A practical miniature electret capsule for builders who need a small, low-current microphone and are comfortable working at component level. Its wide voltage window and documented impedance make it straightforward to plan into compact audio circuits.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very small 6.0 x 2.7 mm footprint
  • Wide 1.5 to 10V operating range
  • Low 0.5mA current draw
  • Clear impedance and sensitivity figures for design work

Cons

  • Bare component only, no wires or connector supplied
  • Requires soldering and a suitable bias circuit
  • Datasheet needed for exact pin details

Best for

Compact audio, voice pick-up and sensor projects built by experienced hobbyists

Not ideal for

Plug-and-play users wanting a ready-made microphone module

Specifications

ManufacturerINGHAi
Voltage Rating1.5 to 10V
Sensitivity (dB)-64
Diameter (mm)6
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x GMI6027P-2C64DB electret condenser microphone capsule

Frequently Asked Questions

What supply voltage does this microphone need?
It is rated for 1.5 to 10V DC. Keep your circuit within that window and provide the biasing an electret capsule requires.
How much current does it draw?
The capsule draws approximately 0.5mA, which is modest enough for many portable and battery-powered designs.
Is this a complete microphone module?
No. It is a bare electret condenser capsule, so it needs to be soldered into a circuit with a suitable bias arrangement.
What does the -64dB sensitivity figure mean?
It is the capsule's rated sensitivity relative to a reference sound pressure, useful when planning the gain of your preamp stage.
What is included in the package?
One GMI6027P-2C64DB electret condenser microphone capsule is supplied.
How should I handle and store it?
Treat it as a static-sensitive component, keep soldering heat brief and store it in a dry place away from physical stress.

Overview

The INGHAi GMI6027P-2C64DB is a small electret condenser microphone capsule intended for embedding into electronic circuits. It measures 6.0 mm across and 2.7 mm high, so it fits into tight enclosures, wearable devices and compact audio modules where full-size microphone cartridges will not go. The part is supplied as a bare component, ready to be soldered into a board or wired into a prototype.

With a 1.5 to 10V operating range and a current draw of about 0.5mA, the capsule can run from small DC rails and battery packs. Its 2.2kR impedance and -64dB sensitivity rating give designers clear starting points when matching the microphone to an amplifier or codec input.

Key Features

  • Compact capsule: 6.0 mm diameter and 2.7 mm height for space-limited layouts.
  • Flexible supply: operates from 1.5V up to 10V.
  • Low current: approximately 0.5mA draw, helpful in portable designs.
  • Known impedance: 2.2kR output impedance for circuit planning.
  • Sensitivity rating: -64dB for predictable level budgeting.
  • Single-unit supply: one capsule per pack for repairs or prototyping.

Specifications Explained

Voltage rating (1.5 to 10V)

This is the supply window the capsule expects. Staying inside it keeps the internal electret element and its associated circuitry within normal operating conditions. Designs that run close to the lower end suit small battery projects, while higher rails may give more headroom for the following amplifier stage.

Sensitivity (-64dB)

The sensitivity figure describes output level relative to a reference sound pressure. A -64dB rating is a useful number when you are planning gain in the preamp stage and comparing this capsule against alternatives in a design.

Impedance (2.2kR)

The 2.2kR impedance indicates how the capsule behaves as a source. Matching it sensibly with the input stage helps preserve signal level and reduces loading effects.

Current draw (0.5mA)

Around 0.5mA is modest, so the microphone adds little to the overall power budget of a portable device.

Size (6.0 mm x 2.7 mm)

The small diameter and low height allow mounting in places where larger capsules are impractical, such as slim handheld enclosures and dense circuit boards.

Compatibility and Requirements

The capsule needs a DC supply within the stated 1.5 to 10V range and a circuit that provides suitable biasing for an electret element. It is a bare component, so soldering and basic circuit assembly are required. Refer to the manufacturer datasheet for the exact pin arrangement and application circuit before designing it in.

Typical Uses

  • Adding voice pick-up to compact custom electronics
  • Replacing a failed microphone capsule during repair work
  • Prototyping audio sensing and sound-level projects
  • Embedding audio capture in small enclosures and wearables
  • Educational and hobby electronics builds

What's in the Box

One GMI6027P-2C64DB electret condenser microphone capsule.

Quick specs

Manufacturer
INGHAi
Voltage Rating
1.5 to 10V
Sensitivity (dB)
-64
Diameter (mm)
6
Shipping Weight
0.001 kg
Shipping Dimensions
1 × 1 × 1 cm
See all specifications