
1 / 3 · Click to enlarge
AI Summary
A handheld endoscope with front and side lenses on a 5-metre IP67 waterproof probe, shown live on a 4.3-inch IPS screen. The dual-lens tip lets you look ahead and sideways without withdrawing the cable.
Key Highlights
- Dual front and side lenses for wider inspection coverage
- 5-metre probe reaches deep into pipes, walls and cavities
- 4.3-inch IPS screen with 1280x800 live view
- 1920x1080 JPEG photos and 640x480 AVI video
- IP67 waterproof probe with a 70-degree viewing angle
- 2000mAh battery rated for up to 4 hours of use
Ideal For
- Plumbers tracing blockages in long pipe runs
- Home inspectors checking cavities and ductwork
- Automotive technicians inspecting engine and chassis interiors
- Maintenance engineers examining machinery internals
- DIY users retrieving dropped items from drains or gaps
Buying Tip
Check that your TF card is inserted and formatted before heading out, since the camera stores all photos and video on removable media rather than internal memory.
Elecvora expert review
Our verdict
The 113-B-2 makes sense for anyone who needs a long-reach inspection camera with its own screen and a side-view lens. It trades video resolution for convenience, which is a fair compromise for diagnostic work.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Dual front and side lenses reduce re-insertion during inspections
- 5-metre cable covers long pipe and duct runs
- Self-contained 4.3-inch IPS screen with no phone required
- IP67 waterproof probe suits wet and dirty environments
Cons
- Video is limited to 640x480 AVI
- TF card is not included, so storage must be purchased separately
- At around 1000 g the kit is not the lightest to hold overhead for long periods
Best for
Plumbing, automotive and building inspections where reach and a side view matter
Not ideal for
Users who need high-definition video recording or a pocket-sized borescope
Specifications
| Item Type | Inspection Camera |
|---|---|
| Resolution | 640 x 480 pixels (AVI), 1920 x 1080 pixels (JPEG) |
| Rating Voltage (VDC) | 5 |
| Operating Temperature (°C) | -10 to 60 |
| Display | 4.3 Inch |
| Weight (g) | 1000 |
| Display Resolution (pixel) | 1280x800 |
| Shipping Weight | 0.546 kg |
| Shipping Dimensions | 20 × 13 × 7.5 cm |
What's in the box
- 1 x Inskam 113-B-2 5M Dual Lens Endoscope Inspection Camera
- 1 x USB C to Micro USB cable
- 1 x protective ring
- 1 x magnet
- 1 x hook
- 1 x user manual
Frequently Asked Questions
Do I need a phone or app to use this endoscope?
Is the camera probe waterproof?
What power does the camera require?
What resolution are the photos and videos?
Is a memory card included?
What comes in the box?
Overview
The Inskam 113-B-2 is a self-contained inspection camera for looking inside spaces you cannot see directly. The probe carries two lenses at the tip: one facing forward and one facing the side, so you can examine a pipe wall or a cavity edge without twisting or withdrawing the cable each time. Live footage appears on the built-in 4.3-inch IPS display at 1280x800, and the whole unit runs from an internal 2000mAh battery rated for up to four hours.
With a 5-metre cable, the 113-B-2 suits work where a short borescope would fall short, such as long drainage runs, ducting or deep engine compartments. The cable detaches from the handle for storage and transport.
Key Features
- Dual-lens tip: front and side views from a single insertion.
- 5-metre reach: extended cable for deep or overhead inspections.
- 4.3-inch IPS screen: 1280x800 live view without a separate phone.
- Photo and video capture: 1920x1080 JPEG stills and 640x480 AVI clips.
- IP67 waterproof probe: rated for wet conditions such as drains and tanks.
- 70-degree viewing angle: a practical field of view for close-range work.
- H.265 compression: smaller files on the TF card.
- Detachable cable: easier packing and handling on site.
Specifications Explained
Imaging
The 2MP sensor produces 1920x1080 JPEG photographs, which is enough detail to document a defect or read a serial plate. Video is recorded at 640x480 AVI, so treat clips as reference footage rather than high-definition records. The 70-degree viewing angle keeps a useful amount of the surroundings in frame at close range.
Display and power
The 4.3-inch IPS panel resolves 1280x800 and is viewable without an external device. Power comes from a 2000mAh battery rated for up to four hours, and the unit is marked for 5 VDC and operation between -10 and 60 degrees Celsius.
Build and storage
The probe is IP67 waterproof for wet inspections. Recordings are stored on a TF card, and H.265 compression helps keep file sizes manageable. The complete kit weighs around 1000 g.
Compatibility and Requirements
The 113-B-2 is a standalone system: the screen, battery and probe are all part of the unit, so no phone, tablet or computer is needed for viewing. A TF card is required to store photos and video. Charging and data transfer use the supplied USB C to Micro USB cable.
Typical Uses
- Checking drains, traps and soil pipes for blockages or damage
- Inspecting cylinder bores, intake ports and chassis cavities on vehicles
- Looking behind plasterboard, under floors and inside ductwork
- Examining machine interiors, gearboxes and hard-to-reach assemblies
- Retrieving small dropped items with the hook or magnet
What's in the Box
- 1 x Inskam 113-B-2 5M dual lens endoscope inspection camera
- 1 x USB C to Micro USB cable
- 1 x protective ring
- 1 x magnet
- 1 x hook
- 1 x user manual

Quick specs
- Item Type
- Inspection Camera
- Resolution
- 640 x 480 pixels (AVI), 1920 x 1080 pixels (JPEG)
- Rating Voltage (VDC)
- 5
- Operating Temperature (°C)
- -10 to 60
- Display
- 4.3 Inch
- Weight (g)
- 1000


















