Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 2-metre IR repeater cable that carries remote signals from a visible receiver dome to a small transmitter dome aimed at your hidden device. It runs on 5VDC USB power and needs no configuration beyond positioning the two ends.

Key Highlights

  • 2-metre cable separates receiver and transmitter domes
  • Large receiver dome picks up the remote signal
  • Small transmitter dome repeats it to the device
  • 5VDC 0.2A USB power input
  • Compact 40 g accessory with black finish
  • Plug-and-play design with no setup software

Ideal For

  • Home cinema owners hiding set-top boxes in cabinets
  • AV enthusiasts tidying equipment behind a TV
  • Anyone with a media player in a closed wall unit
  • Users who need remote control reach across a room

Buying Tip

Before mounting anything, test the placement by holding the receiver dome where your remote naturally points and the transmitter dome within a few centimetres of your device's IR window.

Elecvora expert review

Our verdict

A simple, low-cost way to keep IR-controlled gear hidden without losing remote access. It does one job and depends almost entirely on careful placement of the two domes.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Straightforward plug-and-play concept
  • 2-metre cable gives useful routing flexibility
  • Low 5VDC power requirement
  • Compact and lightweight

Cons

  • Requires a 5VDC power source
  • Performance depends on precise dome alignment
  • No specifications given for range or supported protocols

Best for

Hiding IR-controlled AV equipment in cabinets or behind screens

Not ideal for

Devices controlled only by Bluetooth, Wi-Fi or RF

Specifications

Item TypeAccessory
Operating Power5VDC 0.2A
Cable Length2 Meter
ColorBlack
Weight (g)40
Shipping Weight0.02 kg
Shipping Dimensions6 × 5 × 3 cm

Frequently Asked Questions

How does this IR extension cable work?
The large receiver dome picks up infrared signals from your remote, and the small transmitter dome repeats them at your device's IR window. Both domes are connected by a 2-metre cable.
What power does it need?
It is rated for 5VDC at 0.2A. A USB port or a suitable 5VDC USB adapter can supply this.
Will it work with any remote-controlled device?
It is intended for devices that respond to infrared remotes and have an accessible IR receiver. Devices using Bluetooth, Wi-Fi or radio frequency control are not supported by this type of accessory.
How close should the transmitter dome be to my device?
Place it directly in front of the device's IR receiver window with a clear path. Small adjustments in position often make the difference between reliable and missed commands.
What is included in the package?
Package contents are not confirmed in the product data. Check the packing list when the item arrives.
How should I care for the cable?
Keep the domes clean and free of dust, avoid sharp bends in the cable, and do not pull on the domes when repositioning. Disconnect power before moving the unit.

Overview

When a set-top box, amplifier or media player is tucked inside a cabinet or mounted behind a screen, its IR window is often out of the remote's line of sight. This IR remote extension cable solves that by relaying the signal: a large receiver dome captures the remote's infrared output, and a small transmitter dome repeats it directly at the device's IR receiver. The two domes sit at opposite ends of a 2-metre cable, giving you useful freedom when routing around furniture and cabinet walls.

Key Features

  • Two-part IR relay: one receiver dome and one transmitter dome on a single cable.
  • 2-metre reach: enough length to move the pickup point away from the hidden equipment.
  • USB power input: operates from a 5VDC 0.2A supply.
  • Compact build: the whole accessory weighs around 40 g and uses a black cable that blends into dark AV shelving.
  • No configuration: there are no settings, pairing steps or software to manage.

Specifications Explained

Cable length

At 2 metres, the cable lets you place the receiver dome on a shelf edge, cabinet front or nearby wall while the transmitter stays at the device. Plan the route before fixing anything in place.

Operating power

The unit is rated for 5VDC at 0.2A. That is a low-power draw, so a standard USB port or a suitable USB wall adapter can supply it. Check that the source you choose provides 5VDC before connecting.

Receiver and transmitter domes

The larger red dome is the receiver that faces your remote. The smaller dome is the transmitter that must be aimed at the IR window of the device you want to control. Correct positioning of both ends matters more than any other factor for reliable operation.

Compatibility and Requirements

This accessory works with devices that are controlled by infrared remotes and that have an accessible IR receiver window. It requires a 5VDC power source, typically a USB port or a suitable USB adapter. No other specifications are stated for this model, so confirm your device uses IR rather than radio control before buying.

Typical Uses

  • Controlling a set-top box stored inside a closed cabinet.
  • Operating an AV receiver or sound system placed below the screen.
  • Keeping media players out of sight in a tidy wall unit.
  • Extending remote control reach to equipment in another part of the room.

What's in the Box

Package contents are not confirmed for this listing. Check the packing list on arrival before installation.

Quick specs

Item Type
Accessory
Operating Power
5VDC 0.2A
Cable Length
2 Meter
Color
Black
Weight (g)
40
Shipping Weight
0.02 kg
See all specifications