Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by KEMET, this mlccs- multi layer ceramic capacitors is a good fit for everyday home and hobby use. Main specs: manufacturer KEMET; series SMD Comm C0G; capacitance 0.01uF. Check that your power source supplies 25 before connecting it.

Key Highlights

  • Manufacturer: KEMET
  • Series: SMD Comm C0G
  • Capacitance: 0.01uF

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerKEMET
SeriesSMD Comm C0G
Capacitance0.01uF
Voltage Rating (V)25
Tolerance (%)1
Temperature CoefficientC0G
Mounting TypeSMD
Thickness (mm)-
Case/Package:0603
Length (mm)1.6
Width (mm)0.8
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The C0603X103F3GACTU-KEMET-SMD Multilayer Ceramic Capacitor, 0.01 µF, 25 V, 0603 [1608 Metric], ± 1%, C0G / NP0, made by KEMET, is listed in our mlccs- multi layer ceramic capacitors range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: KEMET
  • Series: SMD Comm C0G
  • Capacitance: 0.01uF
  • Voltage Rating (V): 25 (match this to your power supply; too high a voltage can damage the part)
  • Tolerance (%): 1
  • Temperature Coefficient: C0G
  • Mounting Type: SMD
  • Thickness (mm): -

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

KEMET’s Flexible Termination (FT-CAP) MLCC in C0G dielectric incorporates a unique, flexible termination system that is integrated with KEMET’s standard termination materials. A conductive silver epoxy is utilized between the base metal and nickel barrier layers of KEMET’s standard termination system in order to establish pliability while maintaining terminal strength, solderability and electrical performance. This technology was developed in order to address the primary failure mode of MLCCs– flex cracks, which are typically the result of excessive tensile and shear stresses produced during board flexure and thermal cycling. Flexible termination technology inhibits the transfer of board stress to the rigid ceramic body, therefore mitigating flex cracks which can result in low IR or short circuit failures. Capacitance change with reference to ambient temperature is limited to ±30 ppm/ºC from −55°C to +125°C. up to 5 mm flex-bend capability Operating temperature range from −55°C to +125°C Capacitance offerings ranging from 0.5 pF up to 0.47 μF DC voltage ratings of 10, 16, 25, 50, 100, 200 and 250V No piezoelectric noise High thermal stability High ripple current capability Non-polar device, minimizing installation concerns

Package Includes:

1 x C0603X103F3GACTU-KEMET-SMD Multilayer Ceramic Capacitor, 0.01 µF, 25 V, 0603 [1608 Metric], ± 1%, C0G / NP0

Quick specs

Manufacturer
KEMET
Series
SMD Comm C0G
Capacitance
0.01uF
Voltage Rating (V)
25
Tolerance (%)
1
Temperature Coefficient
C0G
See all specifications

More from KEMET

View all →

Related Products

View all →