
1 / 15 · Click to enlarge
At a glance
This electronics is a good fit for DIY builders and repair work. Main specs: component name Component Symbol; in-line monolithic capacitor 105 C1; 1220# button cell holder BT1.
Key Highlights
- Component Name: Component Symbol
- In-line monolithic capacitor 105: C1
- 1220# Button Cell Holder: BT1
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Component Name | Component Symbol |
|---|---|
| In-line monolithic capacitor 105 | C1 |
| 1220# Button Cell Holder | BT1 |
| Tactile Switch | KEY1-KEYI7 |
| Android charging port | P1 |
| 3-digit digital tube Common anode red | P4, P5 |
| STC Microcontroller DIP28 | U1 |
| IC Socket28P | U1 |
| CR2032 Button Battery 3V | Not includes |
| Shell | Optional |
Overview
The DIY Electronic Kit Digital Tube Calculator DIY Kits 51 Microcontroller Training Experiment Welding Practice Accessories is listed in our electronics range and suits DIY builders and repair work. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Component Name: Component Symbol
- In-line monolithic capacitor 105: C1
- 1220# Button Cell Holder: BT1
- Tactile Switch: KEY1-KEYI7
- Android charging port: P1 (check which plug or cable it needs)
- 3-digit digital tube Common anode red: P4, P5
- STC Microcontroller DIP28: U1 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- IC Socket28P: U1
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Description:
1. Digital tube display calculator production kit, which can realize mathematical calculations of addition, subtraction, multiplication and division
2. You can also convert color ring resistor values. Suitable for welding practice and electronic training
3. For experiments and other purposes, very suitable for DIY enthusiasts
Specifications:
Product name: HU-054A digital tube display calculator kit
Power supply mode: USB powered 5V or 3V button battery powered, (note the USB and button
The batteries cannot provide power at the same time, otherwise the button battery will be damaged)
Working voltage: >2.8V
Working current: working state: 12mA, sleep state: < 1mA
PCB size: 113x78mm, purely manual measurement, there is an error of 1~2mm
NOTE: This is a DIY kit, you need to solder.
If you need a shell you need to select (Type: Parts + shell)
Features:
1. Composed of special circuit board, digital tube, microcontroller, buttons and other components
2. Perform addition, subtraction, multiplication, and division operations, supporting up to 6-digit calculations, and the calculation results exceed
If the 6-digit number is a decimal, only the first 6 digits will be displayed. If it is an integer, the first 6 digits will be displayed.
Will be expressed using scientific notation, the maximum number is 9.99x1011
3. Color ring resistance conversion, supports 4-ring resistance and 5-ring resistance, and the maximum calculation range is small
Within 4KM, the accurate calculation range is less than 1M, and it will be automatically recognized based on the number of input colors.
4-ring resistor or 5-ring resistor
4. Enter sleep mode by pressing the button to reduce power consumption
5. 6-digit precision
Package Includes:
1x Parts Kit
1x Shell(Optional)















Quick specs
- Component Name
- Component Symbol
- In-line monolithic capacitor 105
- C1
- 1220# Button Cell Holder
- BT1
- Tactile Switch
- KEY1-KEYI7
- Android charging port
- P1
- 3-digit digital tube Common anode red
- P4, P5











