Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 6x6mm SMD tactile switch with four pins, rated 12V and 250±40gf for reliable PCB control. It delivers up to 1,000,000 cycles and low ≤50mΩ contact resistance for consistent switching.

Key Highlights

  • 4-pin SMD tactile switch with 6x6mm footprint
  • 12V voltage rating for low-power control circuits
  • 250±40gf operating force for a light, tactile feel
  • Rated for 1,000,000 life cycles
  • Contact resistance ≤50mΩ for stable signal transfer
  • Snap-in style mounts directly on PCB

Ideal For

  • Electronics designers building compact PCB control interfaces
  • Repair technicians replacing tactile switches on circuit boards
  • Makers and hobbyists working on DIY electronics projects
  • Automated assembly environments using SMD components
  • Low-power device manufacturers needing reliable pushbuttons

Buying Tip

Confirm that your PCB footprint matches the 6x6mm four-pin SMD layout and that your circuit operates within the 12V rating before ordering.

Elecvora expert review

Our verdict

The KKG TK-066-4 is a well-specified SMD tactile switch for low-voltage control applications, offering a long rated life and consistent tactile response. It is a sensible choice for compact PCB designs where a reliable momentary pushbutton is needed.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact 6x6mm SMD footprint saves board space
  • Long 1,000,000-cycle life rating
  • Low ≤50mΩ contact resistance
  • Light 250±40gf operating force

Cons

  • Requires SMD soldering equipment and skills
  • Limited to 12V rating, not for mains switching

Best for

Compact low-power PCB control interfaces

Not ideal for

High-voltage or mains power switching

Specifications

ManufacturerKKG
Voltage Rating (V)12
Operation Force250±40gf
Life Cycle1000000
Contact Resistance (ohm)≤50mΩ
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x Tact Switch-TK-066-4 Pins 6x6 SMD

Frequently Asked Questions

What is the voltage rating of this tactile switch?
The KKG TK-066-4 is rated for 12V. It is intended for low-power control and signal circuits, not for mains voltage.
How many pins does the switch have?
It has four pins and uses a surface-mount design for direct PCB installation.
What is the operating force?
The operating force is 250±40gf, giving a light and consistent tactile feel.
What is included in the package?
The package includes one Tact Switch-TK-066-4 Pins 6x6 SMD. No additional caps or accessories are included.
How should I care for this switch?
Store it in a dry environment and avoid excessive force beyond the rated operating force. During soldering, follow suitable reflow profiles to prevent damage.
What is the contact resistance?
The contact resistance is ≤50mΩ, which helps maintain signal integrity in low-power circuits.

Overview

The KKG TK-066-4 is a surface-mount tactile switch built for direct PCB mounting. Its 6x6mm body and four-pin SMD layout make it a practical choice for compact electronic designs where a reliable pushbutton is needed. The switch is rated at 12V and offers an operating force of 250±40gf, giving a light and consistent tactile response. With a life cycle of 1,000,000 operations and contact resistance of ≤50mΩ, it is designed for repeated use in control and signal applications.

Key Features

  • Compact SMD design: 6x6mm footprint with four pins for surface mounting on PCBs.
  • Light operating feel: 250±40gf actuation force provides clear tactile feedback.
  • Long service life: rated for 1,000,000 cycles, suitable for frequently used controls.
  • Low contact resistance: ≤50mΩ helps maintain signal integrity in low-power circuits.
  • 12V rating: appropriate for common low-voltage control and logic-level switching.
  • Snap-in mounting: designed to sit directly on a printed circuit board for straightforward installation.

Specifications Explained

Voltage rating (12V): This indicates the maximum voltage the switch is intended to handle in typical low-power control circuits. It is not a mains-voltage switch.

Operation force (250±40gf): The force needed to actuate the switch is approximately 250 grams-force with a tolerance of ±40gf. This gives a light, responsive press that is easy on the fingers during repeated use.

Life cycle (1,000,000): The switch is rated for one million operations, which supports long-term use in interfaces that are pressed often.

Contact resistance (≤50mΩ): A low contact resistance means the switch introduces minimal resistance when closed, helping preserve signal quality in low-voltage and low-current paths.

Compatibility and Requirements

The TK-066-4 is a surface-mount component intended for soldering onto a printed circuit board with a matching 6x6mm four-pin footprint. It is rated for 12V operation and should be used within that limit. No additional caps or accessories are included; the switch is supplied as a single component.

Typical Uses

This tactile switch is suited to a wide range of low-power electronic equipment. Common applications include control panels, instrument front panels, consumer electronics, prototyping boards and DIY electronics projects where a compact momentary pushbutton is required. Its SMD format is particularly useful in space-constrained designs and automated assembly processes.

What's in the Box

Package includes: 1 x Tact Switch-TK-066-4 Pins 6x6 SMD.

Quick specs

Manufacturer
KKG
Voltage Rating (V)
12
Operation Force
250±40gf
Life Cycle
1000000
Contact Resistance (ohm)
≤50mΩ
Shipping Weight
0.001 kg
See all specifications