
1 / 4 · Click to enlarge
AI Summary
A two-piece black and gray aluminum enclosure for the Coral Dev Board Mini with labeled port cutouts, GPIO access and top ventilation. It snaps together quickly and offers wall, VESA, DIN rail and tripod mounting options.
Key Highlights
- Two-piece aluminum case with black powder-coated top and gray anodized base
- Labeled cutouts for CSI, DSI, MicroSD, headphone jack, speaker and I/O
- Top ventilation slots support heat dissipation during longer sessions
- Wall mounting holes plus VESA 75mm compatible base holes
- Supports KKSB DIN rail clip, UNC thread bracket and mini tripod
- Four rubber feet keep the enclosure stable on flat surfaces
Ideal For
- Makers building wall-mounted Coral Dev Board Mini projects
- Engineers testing camera and vision setups with the CSI connector
- Students and educators who want a tidy enclosure for a dev board
- Workshop users planning DIN rail or tripod mounting
- Anyone who needs GPIO and port access without removing the lid
Buying Tip
Confirm you are using the Coral Dev Board Mini, and remember that mounting extras like the DIN rail clip, UNC thread bracket and tripod are sold separately.
Elecvora expert review
Our verdict
A well-thought-out aluminum case that keeps the Coral Dev Board Mini protected while preserving access to its ports and mounting options. It is a sensible choice for anyone turning a bare board into a tidier, mountable project.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Labeled cutouts keep ports and GPIO reachable
- Two-piece snap design is quick to assemble
- Multiple mounting options including wall, VESA and DIN rail
- Ventilation slots help with heat dissipation
- Rubber feet keep it stable on a desk
Cons
- Mounting accessories such as the DIN rail clip and tripod are not included
- Only fits the Coral Dev Board Mini
- Screws for board assembly are required and should be kept safe
Best for
Makers and engineers who want a protective, mountable enclosure for a Coral Dev Board Mini
Not ideal for
Users with a different development board or those wanting a fully sealed, weatherproof case
Specifications
| Compatibility | Coral Dev Board Mini |
|---|---|
| Color | Black, Gray |
| camera connector | KKSB UNC Thread Bracket, Mini Tripod |
| Shipping Weight | 0.045 kg |
| Shipping Dimensions | 12 × 7 × 3 cm |
What's in the box
- 1 x KKSB Coral Dev Board Mini Case
Frequently Asked Questions
Which board does this case fit?
Are the ports still accessible after assembly?
Does the case include a tripod or DIN rail clip?
How is the case assembled?
Can I mount it on a wall or on a desk?
Does the case help with heat?
Overview
The KKSB Coral Dev Board Mini Case gives your development board a durable home without hiding its connections. The enclosure uses two aluminum parts: a gray anodized bottom that holds the board and a black powder-coated top that snaps into place. Once assembled, the Coral Dev Board Mini sits securely inside while its ports stay accessible through labeled cutouts.
This is a practical case for anyone moving a Coral Dev Board Mini from a bare desk setup into a project, a wall-mounted installation or a camera rig. It protects the board from dust and accidental contact while keeping the connectors you use most within reach.
Key Features
- Labeled port cutouts: Openings for the CSI camera connector, DSI, MicroSD slot, headphone jack, speaker, external power button and I/O connectors.
- GPIO access: The design keeps the board's I/O connectors reachable for wiring and prototyping.
- Ventilation: Air vents on the top cover help dissipate heat during extended use.
- Flexible mounting: Two precut holes allow wall mounting, and the base has holes matching a VESA 75mm pattern.
- Rail and camera support: Mounting holes accept a KKSB DIN rail clip and a KKSB UNC thread bracket for a mini tripod.
- Stable placement: Four rubber feet keep the case steady on a horizontal surface.
- Simple assembly: The top snaps onto the bottom, and four screws secure the board to the base.
Specifications Explained
Compatibility: The case is shaped specifically for the Coral Dev Board Mini, so the cutouts and screw positions match that board rather than a generic footprint.
Materials and color: The black top is powder-coated aluminum and the gray base is anodized aluminum, giving the enclosure a rigid feel and a two-tone finish.
Camera and tripod support: The case works with a KKSB UNC thread bracket and a mini tripod, which is useful when the board is part of a camera or vision setup. A cutout for the CSI camera connector keeps the ribbon path clear.
Size and weight: Shipping weight is 0.045 kg and shipping dimensions are 12 x 7 x 3 cm, so the package is small and light to handle.
Compatibility and Requirements
This enclosure is intended for the Coral Dev Board Mini. It is not a universal case, so check your board model before ordering. Mounting accessories such as the KKSB DIN rail clip, UNC thread bracket, camera holder and mini tripod are separate items and are not included. Assembly uses four screws to fix the board to the base.
Typical Uses
- Wall-mounted Coral Dev Board Mini installations
- Camera and vision projects using the CSI connector
- Desk setups that need a stable, finished-looking enclosure
- DIN rail mounting in a workshop or equipment panel
- Tripod-mounted setups for portable testing
What's in the Box
The package includes one KKSB Coral Dev Board Mini Case. The development board, camera, tripod, DIN rail clip and other mounting accessories are not included.
Quick specs
- Compatibility
- Coral Dev Board Mini
- Color
- Black, Gray
- camera connector
- KKSB UNC Thread Bracket, Mini Tripod
- Shipping Weight
- 0.045 kg
- Shipping Dimensions
- 12 × 7 × 3 cm



















