
1 / 3 · Click to enlarge
AI Summary
A rigid Raspberry Pi 4 enclosure with an anodized aluminum base and powder-coated steel lid, built with internal room for a heatsink, fan or PoE HAT. Laser-cut port openings and reachable GPIO pins keep your build accessible.
Key Highlights
- Anodized aluminum base with a powder-coated steel cover
- Internal space for heatsinks, fans and PoE HATs
- Laser-cut, clearly labeled cutouts for every Pi 4 port
- GPIO pins remain accessible for external devices
- Screw-based board mounting with a snap-fitting lid
- Two rows of top vents plus included rubber feet
Ideal For
- Homelab builders running always-on Raspberry Pi 4 nodes
- Makers wiring sensors and relays through the GPIO header
- Users planning a PoE-powered NAS or camera setup
- Retro gaming and media center builders who need airflow
- Anyone wanting a rigid metal case at a modest price
Buying Tip
Check the height of your chosen heatsink, fan or PoE HAT stack before ordering, since this case is roomy but not unlimited inside.
Elecvora expert review
Our verdict
The KKSB Raspberry Pi 4 Case trades a slim profile for genuine internal space, which is exactly what PoE and fan builds need. The aluminum and steel combination feels more substantial than typical plastic shells at this price.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Room for a heatsink, fan or PoE HAT without changing cases
- Rigid anodized aluminum base and powder-coated steel cover
- Laser-cut, clearly labeled port openings
- GPIO pins remain accessible for wiring
- Tool-free snap-fit lid and included rubber feet
Cons
- Raspberry Pi 4, heatsink, fan and PoE HAT are sold separately
- Bulkier than low-profile cases, so check clearance in tight builds
- No official ingress or drop rating is stated
Best for
PoE-powered and actively cooled Raspberry Pi 4 builds
Not ideal for
Builds that need the smallest possible footprint
Specifications
| Compatibility | PoE HAT |
|---|---|
| Color | Black |
| Shipping Weight | 0.118 kg |
| Shipping Dimensions | 12 × 7 × 4 cm |
What's in the box
- 1 x KKSB Raspberry Pi 4 Case
- 1 x Rubber Feet
- 1 x Fasteners
Frequently Asked Questions
Does the case include a Raspberry Pi 4 board?
Can I use a PoE HAT and a fan at the same time?
Are the GPIO pins accessible once the case is closed?
How is the board fixed inside the case?
Does the case have openings for all the ports?
How should I care for the finish?
Overview
The KKSB Raspberry Pi 4 Case is a two-piece enclosure made from an anodized aluminum base and a powder-coated steel cover. The mixed-material construction gives the case a stiff, solid feel while keeping the board visible only where it matters: at the port edge. The anodized finish on the base and the matte black coating on the lid produce a clean, understated look that sits comfortably on a desk, in a rack shelf or inside a project box.
This is not a slim clip-on shell. The interior is sized to leave room above the board, so you can fit a passive heatsink, an active fan and heatsink combination, or a PoE HAT without changing enclosures. Two rows of vents across the top help warm air escape, and the case ships with rubber feet to keep it stable and slightly raised.
Key Features
- Dual-material build: anodized aluminum base with a powder-coated steel cover for rigidity.
- Cooling headroom: space for passive heatsinks or an active fan and heatsink setup.
- PoE HAT ready: internal clearance for Power over Ethernet HATs.
- Precision cutouts: openings for 2x HDMI, audio, USB Type-C, 2x USB 2.0, 2x USB 3.0, Ethernet, LED and microSD.
- GPIO access: pins stay reachable for wiring sensors, relays and other devices.
- Simple assembly: screw-based PCB mounting and a lid that snap-fits without tools.
Specifications Explained
Compatibility with a PoE HAT is the headline spec here. A PoE HAT sits above the board and adds height, which many low-profile cases cannot accept. This case is shaped around that extra layer, so you can power the Pi and carry data over a single Ethernet cable in a wired installation.
Color: black refers to the powder-coated steel cover, which pairs with the anodized aluminum base. The finish is cosmetic rather than functional, but it hides fingerprints and blends into dark equipment shelves.
Shipping weight of 0.118 kg and shipping dimensions of 12 x 7 x 4 cm describe the packed parcel, not the assembled case. In practice, this is a compact, light shipment that is easy to store or send on as a gift.
Compatibility and Requirements
The case is designed for the Raspberry Pi 4 and accepts PoE HATs, heatsinks and fans within its interior space. The Raspberry Pi 4 board, heatsink, fan and PoE HAT are not included and must be supplied separately. Port cutouts are laser-cut to align with the standard Raspberry Pi 4 connector layout.
Typical Uses
- Media servers and home theater PCs that benefit from cooling space.
- Retro gaming builds that need protection plus airflow.
- NAS and CCTV nodes where a PoE HAT simplifies cabling.
- Smart home and robotics projects that require GPIO access.
- General desktop Raspberry Pi 4 setups.
What's in the Box
- 1 x KKSB Raspberry Pi 4 Case
- 1 x Set of rubber feet
- 1 x Fasteners
Quick specs
- Compatibility
- PoE HAT
- Color
- Black
- Shipping Weight
- 0.118 kg
- Shipping Dimensions
- 12 × 7 × 4 cm



















