Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 10A 250V thermal switch that stays closed below 85°C and opens when that temperature is reached. It provides simple, reliable overheat protection for heaters, ovens, coffee makers and similar appliances.

Key Highlights

  • Normally closed contacts allow current flow below 85°C
  • 10A current rating suits many household heating appliances
  • 250V rating for mains-powered equipment
  • Opens automatically once the 85°C set point is reached
  • Compact 16mm diameter body fits tight installations
  • Straightforward two-terminal thermal switch design

Ideal For

  • Appliance repair technicians replacing failed thermal cut-outs
  • DIY builders adding overheat protection to heating projects
  • Makers restoring ovens, coffee makers and water dispensers
  • Hobbyists working on mains-powered heater circuits
  • Anyone needing a compact 85°C normally closed thermal switch

Buying Tip

Confirm the original thermostat's temperature rating and contact type before ordering, since a normally closed 85°C part will not suit circuits that need a different set point or normally open behaviour.

Elecvora expert review

Our verdict

A straightforward, well-defined thermal switch that does one job clearly: it holds the circuit closed below 85°C and opens above it. For appliance repair and small heating projects within its 10A 250V rating, it is a sensible, low-cost component.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Clear 85°C switching point
  • Normally closed configuration suits many cut-out circuits
  • 10A 250V rating covers common household appliances
  • Compact 16mm body for tight spaces

Cons

  • Fixed set point cannot be adjusted
  • Only suits circuits within 10A at 250V
  • Normally closed version is not interchangeable with normally open parts

Best for

Replacing or adding a fixed 85°C thermal cut-out in heating appliances and small projects

Not ideal for

Circuits that need an adjustable set point or a normally open contact configuration

Specifications

Item TypeSwitch
Rated Voltage (VDC)250
Operating Current (A)10
Model No. / NameKSD301
Operating Temperature (°C)85ºC
Diameter (mm)16mm
Shipping Weight0.02 kg
Shipping Dimensions7 × 5 × 3 cm

What's in the box

  • 1 x KSD301 10A 250V Temperature Controlled Switch Thermostat (85°C Normally Closed)

Frequently Asked Questions

How does a normally closed thermostat work?
The contacts stay closed while the temperature is below 85°C, so current can flow. When the temperature rises past 85°C, the switch opens and interrupts the circuit.
What voltage and current can this switch handle?
It is rated for 250V and 10A. Keep the appliance or project within these limits when using it.
Can I use it to replace a thermostat with a different temperature rating?
Only if the original part also switches at 85°C and is normally closed. A different set point or contact type will change how the appliance behaves.
What is included with the product?
The package contains one KSD301 10A 250V temperature controlled switch thermostat with 85°C normally closed operation.
How large is the switch?
The body diameter is 16mm. Shipping weight is 0.02 kg and the packed dimensions are 7 × 5 × 3 cm.
How should I care for or store the switch?
Keep it dry and free of physical damage before installation, and avoid bending the terminals. Store it in a cool, dry place until it is fitted.

Overview

The KSD301 is a temperature controlled switch that acts as a thermal protector or control element inside a circuit. In this version the contacts are normally closed, meaning the circuit remains complete while the temperature stays below 85°C. When the surrounding temperature climbs past that set point, the switch opens and cuts the current, helping to prevent overheating in the equipment it is fitted to.

With a 10A rating at 250V, the switch is intended for mains-powered heating appliances and similar loads. Its 16mm diameter body keeps the footprint small, which helps when fitting it into compact housings or replacing an existing thermostat of the same style.

Key Features

  • Normally closed operation: current flows until the 85°C threshold is reached.
  • 10A at 250V: suitable for a wide range of household heating circuits.
  • Defined 85°C set point: switching behaviour is predictable and repeatable.
  • Compact 16mm body: fits into tight spaces inside appliances and enclosures.
  • Two-terminal design: simple to wire into an existing circuit.

Specifications Explained

Temperature set point

The 85°C figure is the temperature at which the switch changes state. Below it, the normally closed contacts stay together. Once the temperature rises beyond it, the contacts separate and the circuit opens. This makes the part useful both as a safety cut-out and as a simple temperature control element.

Voltage and current ratings

The 250V and 10A ratings describe the electrical load the switch is designed to handle. Always confirm that the appliance or project you are working on falls within these limits before fitting the part.

Physical size

A 16mm diameter body allows the switch to sit in narrow spaces. The shipping weight is just 0.02 kg, and the packed dimensions are 7 × 5 × 3 cm, so it is a small, light component to store or post.

Compatibility and Requirements

This switch is intended for circuits operating at up to 250V and 10A. It is a normally closed thermal switch, so it is not a substitute for a normally open part in circuits that require the opposite behaviour. Check the temperature rating and contact configuration of the original component before replacing it, and make sure your wiring and load are within the stated ratings.

Typical Uses

Common applications include microwave ovens, ovens, coffee makers, speed cook ovens, heaters, dryers, gas furnaces, bath vents and heaters, wall heaters, motor electric heating, water dispensers, water bottles, coffee shells, electric irons, air conditioning equipment, water heaters, electronic cookers and motor cleaners. In each case the switch provides thermal cut-out or temperature-based switching within the appliance.

What's in the Box

1 x KSD301 10A 250V Temperature Controlled Switch Thermostat (85°C Normally Closed).

Quick specs

Item Type
Switch
Rated Voltage (VDC)
250
Operating Current (A)
10
Model No. / Name
KSD301
Operating Temperature (°C)
85ºC
Diameter (mm)
16mm
See all specifications