Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 28 x 22 mm panel-mount rocker switch with 4NO contacts and a green 9-24V LED indicator. Its latching action and IP65 front protection make it a practical choice for control panels and equipment builds.

Key Highlights

  • 28 x 22 mm installation hole for standard panel cutouts
  • 4NO contact configuration for switching circuits on and off
  • Green LED rated 9 to 24V DC for clear status indication
  • Latching rocker action holds position without constant pressure
  • IP65 protection level against dust and water ingress
  • Chrome-plated brass bezel for a clean, durable front face

Ideal For

  • Panel builders fitting out control enclosures
  • Electronics hobbyists building custom switch panels
  • Technicians servicing workshop and bench equipment
  • Automotive and motorcycle accessory installers working with 12V or 24V DC
  • Makers designing equipment with 28 x 22 mm cutouts

Buying Tip

Measure your panel cutout and confirm it is 28 x 22 mm, and check that your indicator supply falls within 9 to 24V DC before ordering.

Elecvora expert review

Our verdict

A tidy panel switch for builders who want a latching control with a built-in status light and a standard 28 x 22 mm footprint. The 4NO contact arrangement keeps wiring simple, provided your circuit only needs on-off switching.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Standard 28 x 22 mm cutout simplifies panel planning
  • Green LED works across 9 to 24V DC systems
  • IP65 front protection suits dusty or damp enclosures
  • Chrome-plated brass bezel looks clean and resists corrosion

Cons

  • 4NO contacts limit use to on-off switching
  • LED supply must fall within the 9 to 24V DC range
  • Package contents are not confirmed for this listing

Best for

Control panels and equipment builds needing a latching on-off switch with a visible indicator

Not ideal for

Circuits that require changeover or multi-position contact switching

Specifications

ManufacturerLANBOO
Model No. / NameRocker Switch
Voltage Rating (V)9 to 24
Install hole diameter28 x 22mm
Contact Type40 4NO
LED Voltage9 to 24V
Operating humidity35 to 85%RH
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Frequently Asked Questions

What size hole does this rocker switch need?
It fits an installation hole of 28 x 22 mm. Measure your panel cutout before ordering to make sure the switch will seat correctly.
What does 4NO mean on this switch?
4NO means four normally open contacts. The contacts close when the rocker is switched on, so the switch works as an on-off control rather than a changeover selector.
What voltage does the green LED need?
The LED is rated for 9 to 24V DC. Match your indicator supply to that range so the light operates correctly.
Is the switch latching or momentary?
It is a latching rocker switch, so it stays in the selected position until you press it again.
Is the switch waterproof?
It carries an IP65 protection level, which indicates protection against dust and water jets at the front. It is not intended for continuous immersion.
What is included with the switch?
Package contents are not specified for this listing. Check the product packaging for the exact contents before installation.

Overview

The LANBOO LBCX2822 is a panel-mount rocker switch designed for equipment builders who need a clear, tactile on-off control with a visible status light. It fits a 28 x 22 mm installation hole and uses a 4NO contact arrangement, so it switches circuits on and off rather than selecting between multiple outputs. The integrated green LED runs on 9 to 24V DC, giving you a front-panel indication that matches the switch state.

The rocker is a latching type: press it once and it stays in position until you press it again. That makes it well suited to equipment that should remain powered or isolated without someone holding the switch down.

Key Features

  • 28 x 22 mm cutout: a common panel size that keeps the switch compact while leaving enough face area for a comfortable press.
  • 4NO contacts: four normally open contacts for switching loads on and off.
  • Green LED, 9 to 24V DC: a status light that works across common 12V and 24V DC systems.
  • Latching operation: the switch holds its selected position.
  • IP65 protection level: rated for protection against dust and water ingress at the front face.
  • Chrome-plated brass bezel: a durable, corrosion-resistant surround for the rocker.

Specifications Explained

Installation hole: 28 x 22 mm

This is the size of the rectangular opening you cut in the panel. Check your panel or enclosure before ordering, because the switch body is sized to that cutout rather than to a round hole.

Contact type: 40 4NO

The 4NO designation means four normally open contacts. In practice, the contacts close when the rocker is switched on, completing the circuit. Plan your wiring around a simple on-off function rather than a changeover.

LED voltage: 9 to 24V DC

The green indicator is designed for DC supplies between 9 and 24V. Match the LED supply to your system voltage so the light works as intended.

Operating humidity: 35 to 85%RH

The switch is specified for use in environments within this humidity band, which covers most indoor control cabinets and workshop equipment.

IP65 protection level

The IP65 rating indicates protection against dust ingress and water jets at the front. It does not mean the switch is intended for continuous immersion.

Compatibility and Requirements

You need a panel opening of 28 x 22 mm and a DC supply in the 9 to 24V range for the LED. The 4NO contact configuration suits on-off switching of a circuit. Wiring is not included, so plan for suitable terminals and cable for your installation. Confirm that your load and circuit design are appropriate for the switch before fitting it.

Typical Uses

  • Control panels and equipment enclosures
  • Power distribution and isolation switching
  • Workshop machinery and bench equipment
  • Custom electronics and DIY builds
  • Automotive and motorcycle accessory circuits using 12V or 24V DC

What's in the Box

Package contents are not specified by the manufacturer for this listing. Check the product packaging for the exact contents before installation.

Quick specs

Manufacturer
LANBOO
Model No. / Name
Rocker Switch
Voltage Rating (V)
9 to 24
Install hole diameter
28 x 22mm
Contact Type
40 4NO
LED Voltage
9 to 24V
See all specifications