At a glance
Made by LILYGO, this electronics is a good fit for makers, students and electronics hobbyists. Main specs: mcu ESP32; flash 4MB; psram 8MB.
Key Highlights
- Wireless connection
- MCU: ESP32
- Flash: 4MB
- PSRAM: 8MB
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| MCU | ESP32 |
|---|---|
| Flash | 4MB |
| PSRAM | 8MB |
| Wireless Connectivity | Wi-Fi 802.11Bluetooth V4.2 + Bluetooth LE |
| Programming Platform | ArduinoIDE, Micropython |
| Onboard Functions | TF Card SlotUSB or 3.7V Lipo Battery Power SupplyBattery Switch |
| Onboard Button | Reset + Boot |
| Type | OLED |
| Drive | SSD1306 |
| Interface | I2C |
| Text Color | White |
| Resolution | 128 x 64 |
| Size | 0.96-inch Diagonal |
| I2C Interface | SDA--IO21, SCL--IO22 |
| Background Color | Blue |
| LoRa Module | SX1276 |
| Frequency Bands | 868/915/923MHz |
| High-efficiency PA | +14dBm |
| Low RX Current | 9.9mA |
Overview
The LILYGO® Paxcounter/Disaster-Radio LoRa32 V2.1 ESP32 OLED 0.96-inch Bluetooth WiFi Wireless Module SMA Development Board, made by LILYGO, is listed in our electronics range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- MCU: ESP32 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Flash: 4MB (space for firmware, files or media)
- PSRAM: 8MB
- Wireless Connectivity: Wi-Fi 802.11Bluetooth V4.2 + Bluetooth LE (check your phone or controller supports the same Bluetooth version for full range)
- Programming Platform: ArduinoIDE, Micropython
- Onboard Functions: TF Card SlotUSB or 3.7V Lipo Battery Power SupplyBattery Switch (note the battery type so you can order spares or the right charger)
- Onboard Button: Reset + Boot
- Type: OLED
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Feature:
More information:
Github:
LILYGO-LoRa-Series-Github
Cooperate-Paxcounter-Github
Cooperate-Disaster Radio-Official
Cooperate-Disaster Radio-Github
Cooperate-Disaster Radio V0.2.0-Github
Notice: The shipping list does not include battery and SD card.
Note:
The Meshtastic firmware is not adapted to the TCXO version yet.
You can add the below sentences in the source codes to make it work.
https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series

Or you can ask in the github or community of Meshtastic:
Package includes:
1 X LoRa32 Module 1 X LoRa Antenna 2 X Pin 1 X Power Cable(Jst 2pin 1.25mm)







Quick specs
- MCU
- ESP32
- Flash
- 4MB
- PSRAM
- 8MB
- Wireless Connectivity
- Wi-Fi 802.11Bluetooth V4.2 + Bluetooth LE
- Programming Platform
- ArduinoIDE, Micropython
- Onboard Functions
- TF Card SlotUSB or 3.7V Lipo Battery Power SupplyBattery Switch














