
1 / 2 · Click to enlarge
At a glance
Made by LILYGO, this lora module is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Wireless Transmitter Modules, LILYGO Modules; voltage rating 1.8 to 3.7; power supply voltage (v) USB 5V/1A. Check that your power source supplies 1.8 to 3.7 before connecting it.
Key Highlights
- Wireless connection
- Model No. / Name: Wireless Transmitter Modules, LILYGO Modules
- Voltage Rating: 1.8 to 3.7
- Power Supply Voltage (V): USB 5V/1A
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model No. / Name | Wireless Transmitter Modules, LILYGO Modules |
|---|---|
| Voltage Rating | 1.8 to 3.7 |
| Power Supply Voltage (V) | USB 5V/1A |
| Charging Current | 500mA |
| Battery Input Voltage (V) | 3.7-4.2V |
| Operating Voltage (V) | 1.8~3.7v |
| Operating Frequency (MHz) | 433/470MHz(433HMz ) /868M/915M(868MHz ) |
| Transmit Power (dBm) | +20dBm |
| Modulation Mode | FSK,GFSK,MSK,GMSK,LoRaTM,OOK |
| Interface form | SPI |
| FIFO space (Byte) | 64Byte |
| Operating Temperature (°C) | -40 to 85 |
| Length (mm) | 100 |
| Width (mm) | 35 |
| Weight (g) | 38 |
| Shipping Weight | 0.04 kg |
| Shipping Dimensions | 7 × 5 × 2 cm |
Overview
The LILYGO T-Beam Helium V1.2 ESP32 LORA 868MHz WiFi Wireless Bluetooth Module with IPEX &18650 Battery Holder-Unsoldered, made by LILYGO, is listed in our lora module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: Wireless Transmitter Modules, LILYGO Modules
- Voltage Rating: 1.8 to 3.7 (match this to your power supply; too high a voltage can damage the part)
- Power Supply Voltage (V): USB 5V/1A (match this to your power supply; too high a voltage can damage the part)
- Charging Current: 500mA (check which plug or cable it needs)
- Battery Input Voltage (V): 3.7-4.2V (note the battery type so you can order spares or the right charger)
- Operating Voltage (V): 1.8~3.7v (match this to your power supply; too high a voltage can damage the part)
- Operating Frequency (MHz): 433/470MHz(433HMz ) /868M/915M(868MHz ) (make sure the rest of your system works at this frequency)
- Transmit Power (dBm): +20dBm
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The LILYGO T-Beam offers 26-pin headers with GPIO, ADC, VP/VN, DAC, touch, SPI, I2C, UART, 2דLoRa” pin, and power signals (5V/3.3V/GND) There are also two buttons on the board—one is for power, but the second is connected to the GPIO39 pin of the ESP3.The board is built around a dual-core ESP32 chip, with 4MB of SPI flash onboard, providing both Wi-Fi and Bluetooth LE via a “3D antenna” on the PCB. The board’s LoRa support comes in three different variants, operating at 433MHz, 868MHz, and 915MHz depending on region, with an included SMA antenna. While location tracking is provided by the onboard u-Blox NEO-6M GPS module with a ceramic antenna.
The board can be programmed using the Arduino development environment, and the example code shows you how to both send and receive data via LoRa.Flipping the board over there is a battery holder for a 18650 Li-Ion cell, and while a 18650 sort of looks like a “standard” AA battery, it’s significantly different. So don’t make the mistake of substituting in the more common AA battery to try and power the board. They’re not quite the same size, but I’ve seen people attempt this substitution nonetheless.
Features:
- Highly configurable data packet processing program, the configuration parameter data can be saved in EEPROM.
- ERP32 with the new version REV1 supports wireless Internet access and wireless Bluetooth connection.
- Designated module with ceramic antenna and super signal, supports automatic gain control and automatic frequency correction.
- GPS With the help of a global positioning system, GPS module NEO-6M, 3V-5V universal power supply.
- It also has a digital RSSI function, RF wake-up function,
- 4MB flash memory,
- Low voltage detection, and temperature sensor,
- Fast wake-up and frequency hopping LED signal indicator, and battery with data backup.
Package Includes:
1 x LILYGO T-Beam V1.1 ESP32 LORA 868MHz WiFi Wireless Bluetooth Module with IPEX &18650 Battery Holder-Unsoldered
1 x Antenna
1 x Berg Pins
Quick specs
- Model No. / Name
- Wireless Transmitter Modules, LILYGO Modules
- Voltage Rating
- 1.8 to 3.7
- Power Supply Voltage (V)
- USB 5V/1A
- Charging Current
- 500mA
- Battery Input Voltage (V)
- 3.7-4.2V
- Operating Voltage (V)
- 1.8~3.7v
















