
1 / 5 · Click to enlarge
AI Summary
The LILYGO T-Display is an ESP32 development board with a built-in 1.14-inch IPS screen, Wi-Fi, Bluetooth, and 4MB flash. It lets you add a visual interface to IoT projects without wiring a separate display.
Key Highlights
- ESP32-based board with Wi-Fi and Bluetooth for connected projects
- 1.14-inch IPS ST7789V display with 135x240 resolution
- 4MB flash and 520 kB SRAM for code and data storage
- CP2104 USB-to-TTL converter for reliable programming
- Wide interface support including UART, SPI, I2C, ADC, and DAC
- Compact size: 51.52 mm x 25.04 mm and only 7.81 g
Ideal For
- IoT developers building connected sensor nodes with local displays
- Makers creating portable weather stations or data loggers
- Educators teaching ESP32 programming and UI design
- Prototypers needing a compact board with Wi-Fi and a screen
- Hobbyists designing smart home control panels
Buying Tip
Remember to order a USB-C cable and a compatible lithium battery if you plan to use the board untethered, as neither is included.
Elecvora expert review
Our verdict
The LILYGO T-Display packs an ESP32 and a sharp IPS screen into a tiny board, making it a convenient choice for projects that need a built-in display. It is well-suited for rapid prototyping but requires basic soldering and a separate battery for portable use.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Integrated 1.14-inch IPS display saves space and wiring
- ESP32 provides Wi-Fi and Bluetooth connectivity
- USB-C with CP2104 for easy programming
- Wide interface support for sensors and peripherals
- Compact and lightweight design
Cons
- Requires soldering to attach headers for breadboard use
- No battery included, limiting portable operation out of the box
- Display library setup can be non-trivial for beginners
Best for
Makers and developers needing a compact ESP32 board with an integrated display for IoT prototypes.
Not ideal for
Absolute beginners who want a solderless, battery-included kit.
Specifications
| Item Type | ESP32 Based |
|---|---|
| Flash Memory | 4MB |
| Memory Capacity | 4MB Flash 520 kB SRAM |
| USB to TTL Converter | CP2104 |
| Interface | UART, SPI, SDIO, I2C, LED PWM, TV PWM, I2S, IRGPIO,ADC, capacitor touch sensor, DACLNA pre-amplifier |
| Display | IPS ST7789V 1.14 Inch 135*240 resolution |
| Operating Voltage (VDC) | 2.7 ~ 4.2 |
| Max. Operating Current (A) | 60 |
| Operating Temperature (°C) | -40 to 85 |
| Length (mm) | 51.52 |
| Width (mm) | 25.04 |
| Weight (g) | 7.81 |
| Shipping Weight | 0.012 kg |
| Shipping Dimensions | 8 × 8 × 2 cm |
What's in the box
- 1 x LILYGO ESP32 Wi-Fi and Bluetooth Development Board with 1.14-inch LCD Display
- 1 x Battery Connector
- 2 x 12-Pin Male Header
Frequently Asked Questions
What is the display resolution and type?
Can I power the board with a battery?
What programming environments are supported?
Does the package include headers?
What is the operating temperature range?
Is a USB cable included?
Overview
The LILYGO T-Display is a compact ESP32 development board designed for projects that need wireless connectivity and a built-in visual interface. At its core is an ESP32 module that provides Wi-Fi and Bluetooth, paired with a 1.14-inch IPS display driven by the ST7789V controller. This combination allows you to display sensor readings, status messages, or simple graphics without adding an external screen. The board measures just 51.52 mm by 25.04 mm and weighs 7.81 g, making it easy to embed in small enclosures or wearable prototypes.
Key Features
- Integrated display: The 1.14-inch IPS panel offers 135x240 resolution and wide viewing angles, suitable for clear readouts in compact devices.
- ESP32 with 4MB flash: Provides ample space for firmware and data, with 520 kB SRAM for runtime operations.
- USB-to-TTL conversion: The onboard CP2104 chip simplifies code upload and serial communication over USB-C.
- Rich interface set: Supports UART, SPI, SDIO, I2C, LED PWM, TV PWM, I2S, IR GPIO, ADC, capacitive touch sensor, and DAC, plus an LNA pre-amplifier for improved signal reception.
- Flexible power: Operates from 2.7 V to 4.2 V, compatible with a single lithium battery or regulated 3.3 V supply.
Specifications Explained
The 4MB flash memory determines how much program code and static data you can store; it is sufficient for most Arduino or ESP-IDF projects. The 520 kB SRAM handles dynamic memory needs during execution. The operating voltage range of 2.7 V to 4.2 V means the board can be powered directly from a Li-ion cell, and the maximum operating current of 60 mA indicates typical power draw during active use. The wide operating temperature range of -40 to 85 °C supports deployment in harsh environments. The CP2104 converter ensures reliable USB communication without additional drivers on most systems.
Compatibility and Requirements
The board is programmable using the ESP32 Arduino core or Espressif IDF, and the CP2104 driver may be required on some operating systems. A USB-C cable is needed for power and programming (not included). For battery operation, a compatible lithium battery with a connector matching the onboard battery connector is required. The board does not include a battery in the package.
Typical Uses
This board is well-suited for IoT sensor nodes with local displays, portable weather stations, smart home control panels, and educational projects that teach wireless communication and embedded UI. Its small size also makes it a good fit for wearable devices and data loggers where a screen is beneficial.
What's in the Box
- 1 x LILYGO ESP32 Wi-Fi and Bluetooth Development Board with 1.14-inch LCD Display
- 1 x Battery Connector
- 2 x 12-Pin Male Header
Quick specs
- Item Type
- ESP32 Based
- Flash Memory
- 4MB
- Memory Capacity
- 4MB Flash 520 kB SRAM
- USB to TTL Converter
- CP2104
- Interface
- UART, SPI, SDIO, I2C, LED PWM, TV PWM, I2S, IRGPIO,ADC, capacitor touch sensor, DACLNA pre-amplifier
- Display
- IPS ST7789V 1.14 Inch 135*240 resolution
















