Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by LILYGO, this motherboard & development board is a good fit for makers, students and electronics hobbyists.

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Overview

The LILYGO T-Display-P4 ESP32 Development Board Dual MCU ESP32-P4 ESP32-C6 AMOLED/TFT Touch Screen GPS WiFi BLE LoRa SX1262 2MP Camera IMU+RTC/TF, made by LILYGO, is listed in our motherboard & development board range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.


Specifications:
Model: LILYGO T-Display-P4 (two versions: 4.1" AMOLED or 4.05" TFT optional)
Main MCU: ESP32‑P4, RISC‑V dual‑core up to 360 MHz + single 40 MHz
Co‑MCU: ESP32‑C6 with 2.4 GHz Wi‑Fi 6 (802.11ax) and Bluetooth 5 LE
Memory: 16 MB Flash, 32 MB PSRAM
Display: Capacitive touch; AMOLED 4.1" (ultra‑high contrast) or TFT 4.05" punch‑hole
Camera: 2 MP MIPI (OV2710), 1080p@30 fps or 720p@60 fps; AMOLED version uses rear camera, TFT version uses front camera
Media engine: JPEG codec, ISP, PPA, H.264 encoder; MIPI CSI/DSI
Wireless long‑range: LoRa SX1262, bands 400–520 MHz and 830–945 MHz; MMCX antenna port; optional 2.4 GHz LoRa (LR1121)
Audio: I2S speaker and microphone, audio jack
Sensors: 9‑axis IMU (ICM20948) with DMP
I/O & storage: microSD (TF) card slot; SPI and GPIO expansion; XL9535 16‑bit GPIO expander; external keyboard connector
Other onboard: RTC, vibration motor, Ethernet interface, battery switch
Power & charging: USB charging 5 V, 500 mA; charge IC LGS4056H; battery gauge BQ27220
USB & ports: High‑speed USB‑A plus basic USB (dual USB), MMCX antenna connectors
Size: 63 x 109 x 22 mm
Software support: ESP‑IDF, VS Code

Features:
1. Dual‑MCU architecture: ESP32‑P4 for imaging and audio, plus ESP32‑C6 for Wi‑Fi 6 and BLE—built for responsive, connected projects.
2. Two display choices: 4.1" AMOLED with rear camera or 4.05" punch‑hole TFT with front camera; both are capacitive touch.
3. Video‑ready: OV2710 2 MP MIPI camera, hardware JPEG and H.264 encode, and MIPI CSI/DSI for smooth image and video applications.
4. Connectivity built in: Multi‑band LoRa SX1262, optional 2.4 GHz LoRa, Wi‑Fi 6, BLE, Ethernet, microSD, dual USB, and audio jack.
5. Rich peripherals: I2S speaker/mic, vibration motor, RTC, 9‑axis IMU, XL9535 GPIO expander, and external keyboard header with 16 MB Flash + 32 MB PSRAM.

Package Included:
1 x T-Display-P4
1 x MMCX LoRa Antenna



Product Safety Information

More from LILYGO

View all →

Related Products

View all →