
1 / 7 · Click to enlarge
AI Summary
A compact ESP32-S3R8 board with 8MB PSRAM, 6MB flash and a bright 240 x 536 AMOLED display. The not solder version keeps the 14-pin headers separate so you can plan your own layout before fixing them in place.
Key Highlights
- ESP32-S3R8 dual-core LX7 microcontroller with Wi-Fi and Bluetooth 5.0
- 1.91-inch AMOLED panel, 240 x 536 resolution, IPS full view angle
- 8MB PSRAM and 6MB flash for display-heavy firmware and data buffers
- QSPI interface driven by the RM67162 display driver IC
- Not solder version with separate 14-pin headers for flexible mounting
- Onboard boot, reset and IO21 buttons for easy flashing and input
Ideal For
- Makers building compact IoT nodes with an onboard readout
- Developers prototyping wearable and body-worn devices
- Embedded engineers evaluating ESP32-S3 display boards
- Hobbyists learning Arduino, PlatformIO-IDE or MicroPython
- Designers who need a small screen in a space-limited enclosure
Buying Tip
Confirm your flashing cable and toolchain before ordering, and remember the 14-pin headers ship loose on this not solder version, so plan the mounting position before assembly.
Elecvora expert review
Our verdict
A tidy ESP32-S3 board that pairs solid memory with a genuinely useful AMOLED screen, and the not solder version gives you layout freedom before the headers go on. It is a sensible pick for compact connected projects that need a local display.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- ESP32-S3R8 with 8MB PSRAM and 6MB flash
- Sharp 240 x 536 AMOLED with IPS full view angle
- Wi-Fi and Bluetooth 5.0 built in
- Works with Arduino, PlatformIO-IDE and MicroPython
- Separate headers allow flexible mounting
Cons
- Headers are not pre-fitted, so assembly is required
- No battery or enclosure included in the box
Best for
Compact IoT and wearable prototypes that need an onboard display
Not ideal for
Users who want a fully assembled, plug-and-play board out of the box
Specifications
| Item Type | Other IoT Boards |
|---|---|
| Flash Memory | 6MB |
| MCU Type | ESP32-S3R8 Dual-core LX7 microprocessor |
| Connectivity | Wi-Fi, Bluetooth 5.0 |
| Development Board | Arduino, PlatformlO-IDE, Micropython |
| Driver IC | RM67162 |
| PSRAM | 8MB |
| Resolution | 240 X RGB X 536(H) |
| Viewing Angle (Deg.) | IPS Full View Angle |
| Interface | QSPI |
| Onboard | Boot (IO00) + Reset + IO21 Button |
| Active Area (mm) | 19.8*44.22mm |
| Weight (g) | 14 |
| Shipping Weight | 0.027 kg |
| Shipping Dimensions | 8 × 5 × 3 cm |
What's in the box
- 1 x LILYGO T-Display-S3 AMOLED Not Solder Version board
- 1 x Power cable
- 2 x 14-pin headers
Frequently Asked Questions
What is the difference between this and a soldered version?
Which development environments are supported?
How much memory does the board have?
What is the display resolution?
What comes in the package?
How do I flash new firmware?
Overview
The LILYGO T-Display-S3 AMOLED Not Solder Version combines an ESP32-S3R8 dual-core LX7 microcontroller with a 240 x 536 AMOLED display on a single small board. It is aimed at developers who want a screen, wireless connectivity and processing power in one module rather than wiring three separate parts together.
This is the not solder version, which means the 14-pin headers are supplied separately. That gives you room to decide how the board sits in your enclosure or carrier board before you commit to a header position.
Key Features
- ESP32-S3R8 MCU: dual-core LX7 microprocessor with Wi-Fi and Bluetooth 5.0 for connected projects.
- AMOLED display: 240 x RGB x 536 resolution with an IPS full view angle, driven by the RM67162 IC over a QSPI interface.
- Memory: 8MB PSRAM and 6MB flash to support graphics, buffers and application code.
- Onboard controls: Boot (IO00), Reset and IO21 buttons for flashing and simple input.
- Flexible toolchain: works with Arduino, PlatformIO-IDE and MicroPython development environments.
Specifications Explained
Display
The 19.8 x 44.22mm active area carries a 240 x 536 pixel AMOLED panel. AMOLED pixels emit their own light, so dark areas of an interface stay genuinely dark, and the IPS full view angle keeps colours consistent when the screen is viewed off-axis. The RM67162 driver and QSPI interface mean the display is addressed over a fast serial link rather than a slow parallel bus.
Memory and Processing
8MB PSRAM is the working space for frame buffers, network buffers and larger data structures, while 6MB flash stores your firmware. The ESP32-S3R8 dual-core LX7 handles application logic and wireless tasks together.
Connectivity
Wi-Fi and Bluetooth 5.0 are built in, so the board can join a network, act as a small web endpoint or pair with a phone or sensor without extra radio hardware.
Compatibility and Requirements
The board is documented for Arduino, PlatformIO-IDE and MicroPython workflows. You will need a suitable development environment on your computer and a way to connect the board for flashing; check your own toolchain and cable before starting. The 14-pin headers in the box are not pre-fitted on this version, so plan your mounting before assembly.
Typical Uses
- Compact IoT nodes that need a local readout
- Wearable prototypes where board size matters
- Sensor dashboards and status displays
- Embedded systems learning and prototyping
What's in the Box
- 1 x LILYGO T-Display-S3 AMOLED Not Solder Version board
- 1 x Power cable
- 2 x 14-pin headers
Quick specs
- Item Type
- Other IoT Boards
- Flash Memory
- 6MB
- MCU Type
- ESP32-S3R8 Dual-core LX7 microprocessor
- Connectivity
- Wi-Fi, Bluetooth 5.0
- Development Board
- Arduino, PlatformlO-IDE, Micropython
- Driver IC
- RM67162
















