
1 / 9 · Click to enlarge
At a glance
Made by LILYGO, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type ESP32 Based, S3 Variant; flash memory 16MB; mcu type ESP32-S3R8 Dual-core LX7 microprocessor. Check that your power source supplies 3.3V before connecting it.
Key Highlights
- Item Type: ESP32 Based, S3 Variant
- Flash Memory: 16MB
- MCU Type: ESP32-S3R8 Dual-core LX7 microprocessor
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | ESP32 Based, S3 Variant |
|---|---|
| Flash Memory | 16MB |
| MCU Type | ESP32-S3R8 Dual-core LX7 microprocessor |
| Connectivity | Wi-Fi, Bluetooth 5.0 |
| Power Supply Voltage (V) | 3.3V |
| PSRAM | 8MB |
| Chip | ST7789V |
| Resolution | 170(H)RGB x320(V) 8-Bit Parallel Interface |
| LCD | 1.9" diagonal, Full-color TFT Display |
| Onboard | Boot + Reset + IO14 Button |
| Supported | STEMMA QT / Qwiic JST-SH 1.0mm 4-PIN |
| Connector Type | JST-GH 1.25mm 2PIN |
| Weight (g) | 22g |
| Shipping Weight | 0.035 kg |
| Shipping Dimensions | 8 × 5 × 3 cm |
Overview
The LILYGO T-Display-S3 ESP32 1.9 inch Touch not solder version, made by LILYGO, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: ESP32 Based, S3 Variant
- Flash Memory: 16MB (more memory leaves room for larger programs and buffers)
- MCU Type: ESP32-S3R8 Dual-core LX7 microprocessor (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Connectivity: Wi-Fi, Bluetooth 5.0 (check your phone or controller supports the same Bluetooth version for full range)
- Power Supply Voltage (V): 3.3V (match this to your power supply; too high a voltage can damage the part)
- PSRAM: 8MB
- Chip: ST7789V
- Resolution: 170(H)RGB x320(V) 8-Bit Parallel Interface (confirm your cable or board uses the same connector)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The LILYGO T-Display-S3 ESP32 1.9-inch Touch, not a solder version, is a compact and versatile development module. Featuring an ESP32 microcontroller, it combines computing power with a 1.9-inch touch-sensitive display. The non-solder version allows flexibility in customization and integration. Ideal for IoT and wearable projects, it offers a user-friendly touch interface and wireless connectivity. With its small form factor, it's suitable for applications demanding both computational capability and an interactive display. This development board empowers users to create innovative solutions effortlessly, making it a valuable tool for various embedded systems and prototyping endeavors.
Features:
- Equipped with the powerful ESP32 microcontroller for versatile computing capabilities.
- Features a compact 1.9-inch touch-sensitive display for user interaction.
- Offers a not solder version, providing flexibility for customization and integration.
- Ideal for the Internet of Things (IoT) and wearable projects, combining computing and display capabilities.
- Provides a user-friendly touch interface for seamless interaction.
- Supports wireless communication, facilitating connectivity in IoT applications.
- Small and compact design suitable for space-constrained projects.
- Designed for embedded systems development and prototyping.
- Enables the creation of projects demanding both computational power and an interactive display.
- Developers can use the IO04 pin to interface with the battery voltage detection feature in their programming.
- Provides users with the flexibility to choose between the Arduino ecosystem or MicroPython based on their familiarity, preferences, or specific project requirements
Package Includes:
1 x LILYGO T-Display-S3 ESP32 1.9 inch Touch, not solder version
2 x PH2.54 Pin (1*12P)
1 x JST 1.25mm 2P
Quick specs
- Item Type
- ESP32 Based, S3 Variant
- Flash Memory
- 16MB
- MCU Type
- ESP32-S3R8 Dual-core LX7 microprocessor
- Connectivity
- Wi-Fi, Bluetooth 5.0
- Power Supply Voltage (V)
- 3.3V
- PSRAM
- 8MB
















