
1 / 2 · Click to enlarge
At a glance
Made by LILYGO, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: mcu type ESP32-S3-WR0OM-1; ethernet W5500; buttons Reset + Boot.
Key Highlights
- MCU Type: ESP32-S3-WR0OM-1
- Ethernet: W5500
- Buttons: Reset + Boot
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| MCU Type | ESP32-S3-WR0OM-1 |
|---|---|
| Ethernet | W5500 |
| Buttons | Reset + Boot |
| Onboard | Ethernet + TF Card |
| Memory Capacity | Flash: 16MB, PSRAM: 8MB |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 8 × 5 × 3 cm |
Overview
The LILYGO® T-ETH-Lite Development Board ESP32 ESP32-S3 W5500 Ethernet Module ESP32-S3-WROOM Support TF Expandable Power POE Shield, made by LILYGO, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- MCU Type: ESP32-S3-WR0OM-1 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Ethernet: W5500
- Buttons: Reset + Boot
- Onboard: Ethernet + TF Card
- Memory Capacity: Flash: 16MB, PSRAM: 8MB (more memory leaves room for larger programs and buffers)
- Shipping Weight: 0.015 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 8 × 5 × 3 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Equipped with ESP32 or ESP32-S3 module options.
- Includes W5500 Ethernet controller for wired networking.
- Supports microSD (TF) cards for data storage.
Package Includes:
1 x T-ETH-Lite ESP32S3
1 x Pin (16pin)
1 x Pin (15pin)
1 x 2*4 Pin
1 x Pin(3pin)
Quick specs
- MCU Type
- ESP32-S3-WR0OM-1
- Ethernet
- W5500
- Buttons
- Reset + Boot
- Onboard
- Ethernet + TF Card
- Memory Capacity
- Flash: 16MB, PSRAM: 8MB
- Shipping Weight
- 0.015 kg
















