
1 / 4 · Click to enlarge
AI Summary
A compact ESP32-S3 development board with 16MB flash, 8MB PSRAM and a sub-GHz radio covering 859-894MHz with an 875M SAW filter. It gives you a ready platform for long-range, low-power IoT and LPWAN prototyping.
Key Highlights
- ESP32-S3 dual-core Xtensa LX7 processor clocked up to 240MHz
- 16MB flash and 8MB PSRAM for larger firmware and buffers
- 859-894MHz radio band with an 875M SAW filter
- 2.4GHz Wi-Fi and Bluetooth 5 LE connectivity onboard
- TF-card slot plus BOOT and Reset buttons for easy workflow
- 18650 battery support for portable low-power builds
Ideal For
- IoT developers prototyping sub-GHz sensor nodes
- Hobbyists experimenting with Meshtastic-style networks
- Students learning ESP32-S3 and LPWAN fundamentals
- Engineers building portable low-power wireless devices
- Makers needing TF-card logging on a compact board
Buying Tip
Confirm that 859-894MHz operation is permitted in your region before transmitting, and budget for an 18650 cell and a microSD card since neither is listed in the box.
Elecvora expert review
Our verdict
The T-Halow V1.0 packs an ESP32-S3 with generous memory and a sub-GHz radio into a small, battery-friendly board. It is a sensible pick if your project needs 859-894MHz experimentation rather than another plain Wi-Fi dev kit.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- ESP32-S3 with 16MB flash and 8MB PSRAM
- Sub-GHz 859-894MHz radio with 875M SAW filter
- TF-card slot and 18650 battery support onboard
- Works with Arduino IDE, VS Code and ESP-IDF
Cons
- No battery or microSD card included
- Sub-GHz band use is subject to regional rules
- Radio performance depends on antenna choice, which is not specified
Best for
Long-range, low-power IoT and LPWAN prototyping
Not ideal for
Projects that only need basic 2.4GHz Wi-Fi
Specifications
| Item Type | Development Board |
|---|---|
| Model No. / Name | T-Halow V1.0 |
| RAM | 8MB |
| ROM Capacity | 16MB |
| Processor Type | Xtensa Dual-Core 32-bit LX7 |
| Microcontroller | ESP32-S3 |
| Storage Capacity | TF-Card Slot |
| Clock Speed | Up to 240MHz |
| Core | Dual-core |
| CPU | ESP32-S3 |
| Length (mm) | 115 |
| Width (mm) | 35 |
| Weight (g) | 32 |
| Shipping Weight | 0.121 kg |
| Shipping Dimensions | 20 × 8 × 4 cm |
What's in the box
- 1 x LILYGO T-Halow V1.0 859-894MHz 875M Saw board
- 1 x Accessory set
Frequently Asked Questions
What processor does the T-Halow V1.0 use?
Which frequency band does the radio cover?
Can I power it from a battery?
Which development environments are supported?
Does it have Wi-Fi and Bluetooth?
What is included in the package?
Overview
The LILYGO T-Halow V1.0 is a development board aimed at wireless experimentation in the sub-GHz range. At its centre sits the ESP32-S3, a dual-core 32-bit Xtensa LX7 processor running at up to 240MHz, backed by 16MB of flash and 8MB of PSRAM. Alongside the usual 2.4GHz Wi-Fi and Bluetooth 5 LE radios, the board carries a radio section tuned for the 859-894MHz band with an 875M SAW filter, opening the door to long-range, low-power communication projects.
Measuring roughly 115 x 35mm and weighing about 32g, it is small enough to embed in a project enclosure while still offering accessible headers and onboard controls.
Key Features
- Sub-GHz coverage: operates across 859-894MHz with an 875M SAW filter for cleaner reception in that band.
- ESP32-S3 core: dual-core LX7 at up to 240MHz for wireless work and edge processing tasks.
- Generous memory: 16MB flash and 8MB PSRAM support larger sketches and data buffers.
- Standard wireless: 2.4GHz Wi-Fi and Bluetooth 5 LE for connectivity and configuration.
- Storage expansion: a TF-card slot for logging or file storage.
- Handy controls: BOOT and Reset buttons simplify flashing and recovery.
- Battery ready: supports an 18650 cell for portable, low-power operation.
Specifications Explained
Processor and memory
The ESP32-S3 dual-core LX7 at up to 240MHz handles networking, sensor reads and light edge processing. The 16MB flash stores firmware and assets, while 8MB of PSRAM helps when you need larger buffers for radio traffic or data logging.
Radio section
The 859-894MHz range with an 875M SAW filter is the reason to choose this board over a plain ESP32-S3 dev kit. It targets sub-GHz experimentation where longer reach and lower power matter more than raw throughput.
Physical and power
At 115 x 35mm and 32g, the board fits compact builds. The 18650 battery support makes it practical for field nodes, and the TF-card slot adds local storage without extra wiring.
Compatibility and Requirements
The board is listed as compatible with Arduino IDE, VS Code and ESP-IDF. You will need a suitable USB connection and cable to flash firmware, plus an 18650 cell if you want battery operation. A microSD card is required if you plan to use the TF-card slot.
Typical Uses
- Long-range, low-power IoT sensor nodes
- Meshtastic-style messaging experiments
- LPWAN and sub-GHz radio prototyping
- Student and hobbyist wireless coursework
- Portable data logging with TF-card storage
What's in the Box
- 1 x LILYGO T-Halow V1.0 859-894MHz 875M Saw board
- 1 x Accessory set


Quick specs
- Item Type
- Development Board
- Model No. / Name
- T-Halow V1.0
- RAM
- 8MB
- ROM Capacity
- 16MB
- Processor Type
- Xtensa Dual-Core 32-bit LX7
- Microcontroller
- ESP32-S3
















