
1 / 13 · Click to enlarge
At a glance
Made by LILYGO, this motherboard & development board is a good fit for makers, students and electronics hobbyists. Main specs: mcu1 ESP32-S3; flash 16MB; psram 8MB.
Key Highlights
- MCU1: ESP32-S3
- Flash: 16MB
- PSRAM: 8MB
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| MCU1 | ESP32-S3 |
|---|---|
| Flash | 16MB |
| PSRAM | 8MB |
| Wireless Connectivity | 2.4 GHz Wi-Fi + Bluetooth 5 (LE) |
| MCU2 | ESP32-H2 |
| Flash | 4MB |
| Wireless Connectivity | IEEE 802.15.4 + Bluetooth 5 (LE) |
| Development | Arduin,PlatformIO-IDE, Micropython |
| Visible pixels | 480(W) 480(H) |
| Interface | SPI+RGB |
| Compatibility library | ArduinoGFX, LVGL |
| Onboard functions | QWiiCx2 + TF Card + Antenna |
| Using bus communication protocol | UART |
Compatible with
ArduinoGFX, LVGL
Overview
The LILYGO® T-Panel S3 ESP32-S3+ESP32-H2+RS485/CAN IPS ST7701S LCD Programmable Development Board, made by LILYGO, is listed in our motherboard & development board range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- MCU1: ESP32-S3 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Flash: 16MB (space for firmware, files or media)
- PSRAM: 8MB
- Wireless Connectivity: 2.4 GHz Wi-Fi + Bluetooth 5 (LE) (check your phone or controller supports the same Bluetooth version for full range)
- MCU2: ESP32-H2 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Flash: 4MB (space for firmware, files or media)
- Wireless Connectivity: IEEE 802.15.4 + Bluetooth 5 (LE) (check your phone or controller supports the same Bluetooth version for full range)
- Development: Arduin,PlatformIO-IDE, Micropython
Works with
ArduinoGFX, LVGL
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.













Quick specs
- MCU1
- ESP32-S3
- Flash
- 16MB
- PSRAM
- 8MB
- Wireless Connectivity
- 2.4 GHz Wi-Fi + Bluetooth 5 (LE)
- MCU2
- ESP32-H2
- Flash
- 4MB











