Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by LILYGO, this electronics is a good fit for makers, students and electronics hobbyists.

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Overview

The LILYGO T-Pico-Pro C6 ESP32-C6 Module Raspberry Pi RP2040 Dual MCU Development Board with 2.33 Inch LCD Touch Screen, made by LILYGO, is listed in our electronics range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.



Specifications:
Main Controllers:
MCU1: RP2040 32-bit dual ARM Cortex-M0+; Flash 16MB; SRAM 264KB
MCU2: ESP32-C6 32-bit RISC-V low-power WiFi 6 SOC; Flash 4MB; SRAM 512KB
Connectivity: 2.4 GHz Wi-Fi 6, Bluetooth 5 (LE), IEEE 802.15.4 protocol
Display: 2.33-inch touch IPS TFT LCD; Resolution: 222 (H) RGB x 480 (V); Display Driver: ST7796; Interface: SPI
Sensors: I2C Digital Light Sensor LTR-553ALS-01 with ALS and proximity [PS] capabilities
Storage: Supports SD card expansion
Battery: Onboard 3.8V 470mAh @ 0.2C rechargeable
Input/Output: Capacitive touch display, TF Card slot, boot and run buttons, USB plug modes

Features:
1. Dual-Controller Design
Boasts RP2040 ARM Cortex-M0+ and ESP32-C6 RISC-V SOC for efficient multitasking and reliable performance in complex projects.
2. Enhanced Display Capabilities
Equipped with a 2.33-inch IPS TFT LCD with high-resolution 222 x 480 pixels, delivering vivid visuals and an intuitive touch interface.
3. Advanced Connectivity
Supports the latest wireless protocols: Wi-Fi 6 for high-speed data transfer, and Bluetooth 5 (LE) along with IEEE 802.15.4 for secure, low-power communication.
4. Expansion and Customization Options
Includes SD card support and multiple GPIO pins for increased flexibility in development projects.
5. Integrated Light Sensor
Built-in light and proximity sensor (LTR-553ALS-01) enhances interactive applications and environmental adaptability.

Package Included:
1 x T-Pico-Pro C6 Module
2 x 2.54 mm Pin (13 pins)
2 x 2.54 mm Female Pin (13 pins each)


Product Safety Information

More from LILYGO

View all →

Related Products

View all →