Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by LILYGO, this iot cameras is a good fit for makers, students and electronics hobbyists. Main specs: item type Camera Module; resolution 2MP (1600 x 1200); operating voltage (v) 3.3. Check that your power source supplies 3.3 before connecting it.

Key Highlights

  • Item Type: Camera Module
  • Resolution: 2MP (1600 x 1200)
  • Operating Voltage (V): 3.3

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeCamera Module
Resolution2MP (1600 x 1200)
Operating Voltage (V)3.3
ChipsetESPRESSIF-ESP32-DOWDQ6 240MHz Xtensa single-/dual-core 32-bit LX6 microprocessor
Power Supply Voltage (V)USB 5V/1A
Operating Voltage2.3-3.6V
Working Current (mA)160 mA
Charging Current1A
FlashQSPI flash/SRAM, up to 4 x 16 MB
SRAM520 kB SRAM + 8MBytes External SPRAM
DisplayIPS Panel ST7789/1.3 Inch
USB to TTLCP2104
Camera DetailsOV2640 2Megapixel
On-board clock40MHz crystal oscillator
Battery required(V)3.7V Battery
Frequency2.4~2.5GHz
Transmit Power (dBm)22dBm
Communication Distance(m)300 m
Operating Temperature (°C)40 to 85
Length (mm)80
Width (mm)50
Weight (g)30
Shipping Weight0.01 kg
Shipping Dimensions7 × 3 × 1.1 cm

Overview

The LILYGO T- Plus 1.3 Inch OV2640 Display Normal Rear Camera Module with MPU6050, made by LILYGO, is listed in our iot cameras range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Camera Module (resolution is one factor; lens and lighting matter as much)
  • Resolution: 2MP (1600 x 1200)
  • Operating Voltage (V): 3.3 (match this to your power supply; too high a voltage can damage the part)
  • Chipset: ESPRESSIF-ESP32-DOWDQ6 240MHz Xtensa single-/dual-core 32-bit LX6 microprocessor (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Power Supply Voltage (V): USB 5V/1A (match this to your power supply; too high a voltage can damage the part)
  • Operating Voltage: 2.3-3.6V (match this to your power supply; too high a voltage can damage the part)
  • Working Current (mA): 160 mA (your supply must deliver at least this much current)
  • Charging Current: 1A (check which plug or cable it needs)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a LILYGO T- Plus 1.3 Inch OV2640 Display Normal Rear Camera Module with MPU6050. The lens is used to transfer the image and data transmission. The module has a strong driving ability, strong anti-interference, low calorific value, and is more stable and reliable for Arduino projects. This module can be applied to Arduino Robot, Household Power Systems, raspberry pie, and DIY Servo Shield Module, etc.


Features:

  1. The camera can be extended to become a rear camera.
  2. This module can transfer images and data together.

Package Includes:

1 x LILYGO T- Plus 1.3 Inch OV2640 Display Normal Rear Camera Module with MPU6050

Quick specs

Item Type
Camera Module
Resolution
2MP (1600 x 1200)
Operating Voltage (V)
3.3
Chipset
ESPRESSIF-ESP32-DOWDQ6 240MHz Xtensa single-/dual-core 32-bit LX6 microprocessor
Power Supply Voltage (V)
USB 5V/1A
Operating Voltage
2.3-3.6V
See all specifications

More from LILYGO

View all →

Related Products

View all →