
1 / 6 · Click to enlarge
AI Summary
An ESP32-S3 development board that combines Wi-Fi and Bluetooth 5 LE with on-board isolated RS232 and RS485 modules. It lets you bridge wireless IoT projects to wired serial equipment through one compact, Type-C powered board.
Key Highlights
- ESP32-S3 dual-core XTensa LX7 MCU with 8MB flash
- On-board RSM232MT5V isolated RS232 module
- On-board RSM485MT5V isolated RS485 module
- Wi-Fi and Bluetooth 5 LE wireless connectivity
- USB Type-C port plus WS2812 LED on GPIO1
- Reset, Boot and IO2 buttons for easy control
Ideal For
- IoT developers bridging serial equipment to Wi-Fi
- Industrial automation prototypers working with RS485 devices
- Makers building RS232 data loggers and gateways
- Students learning ESP32-S3 and serial communication
- Engineers testing protocol converters and remote monitoring nodes
Buying Tip
Confirm whether your target device uses RS232 or RS485 wiring before connecting, since the two interfaces are not interchangeable even though both are on this board.
Elecvora expert review
Our verdict
The T-RSS3 is a focused board for developers who need ESP32-S3 performance and isolated serial interfaces in one unit. It removes the usual extra transceiver wiring, though it assumes you already know which serial standard your equipment uses.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Isolated RS232 and RS485 modules are built in
- ESP32-S3 with 8MB flash and wireless support
- Wide 1200 to 256000bps serial range
- USB Type-C and handy on-board buttons and LED
Cons
- Requires a separate USB Type-C cable and 5V supply
- Serial pinout must be checked carefully before wiring
- No enclosure or accessories included
Best for
Developers building wireless-to-serial IoT gateways and prototypes
Not ideal for
Beginners who want a plug-and-play board with no wiring
Specifications
| MCU Type | ESP32-S3 dual-core XTensa LX7 MCU |
|---|---|
| Flash | 8MB |
| Wireless Functions | Wi-Fi / Bluetooth 5 (LE) |
| Programming Software | Arduino, ESP-IDF |
| Onboard | WS2812(GPIO1) |
| Buttons | Reset+ Boot(GPIO0)+ IO2 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 7 × 7 × 3 cm |
What's in the box
- 1 x LILYGO T-RSS3 ESP32-S3 Development Board with RS232 and RS485 modules
Frequently Asked Questions
What microcontroller does the T-RSS3 use?
Does the board include RS232 and RS485 modules?
What power supply does it need?
Which software can I use to program it?
What serial speeds are supported?
What is the WS2812 LED connected to?
Overview
The LILYGO T-RSS3 is a development board for anyone who needs an ESP32-S3 at the centre of a project that also speaks RS232 or RS485. Rather than adding external transceivers, the board carries the RSM232MT5V and RSM485MT5V modules directly, so serial wiring starts at the screw-free header pins. The ESP32-S3 dual-core XTensa LX7 MCU provides the processing headroom, with 8MB of flash for firmware and data.
Wireless support comes through Wi-Fi and Bluetooth 5 LE, making the board a natural bridge between local serial devices and a network or mobile app. A USB Type-C connector handles power and programming, and the on-board WS2812 LED on GPIO1 gives you an immediate visual indicator for status or test routines.
Key Features
- ESP32-S3 dual-core XTensa LX7 MCU for responsive control and wireless tasks.
- 8MB flash for application code, configuration and logged data.
- RS232 and RS485 on board through the RSM232MT5V and RSM485MT5V modules.
- 3000V isolation on both serial modules, with 5V/50mA isolated output.
- Communication rates from 1200 to 256000bps on each serial interface.
- Wi-Fi and Bluetooth 5 LE for cloud links, local dashboards or device pairing.
- WS2812 LED on GPIO1 plus Reset, Boot (GPIO0) and IO2 buttons.
- USB Type-C for a modern, reversible connection.
Specifications Explained
The dual-core ESP32-S3 runs the wireless stack and your application logic without the tight constraints of older eight-bit boards. 8MB of flash is generous for Arduino sketches or ESP-IDF projects that store web assets, certificates or buffered sensor readings.
The RS232 and RS485 modules are the standout part. Each offers 3000V isolation, which helps separate your microcontroller from voltage differences on the serial side, and each provides an isolated 5V/50mA output. Both support rates from 1200 to 256000bps, covering slow legacy equipment as well as faster industrial devices. The board runs from a 5V supply.
For quick feedback during development, the WS2812 LED is wired to GPIO1, and the Reset, Boot and IO2 buttons let you restart, enter download mode and trigger a user action without extra wiring.
Compatibility and Requirements
The board is programmed with Arduino or ESP-IDF. You will need a USB Type-C cable and a 5V power source. Serial peripherals must match the RS232 or RS485 interface you choose, and the modules operate at the stated 1200 to 256000bps range. Because the serial modules are already fitted, no separate transceiver board is required.
Typical Uses
- Bridging RS485 industrial sensors to a Wi-Fi dashboard.
- Logging data from RS232 instruments and sending it over Bluetooth LE.
- Smart home controllers that talk to both wireless devices and serial hardware.
- Prototyping gateways, protocol converters and remote monitoring nodes.
- Teaching and lab work covering serial communication and IoT.
What's in the Box
One LILYGO T-RSS3 ESP32-S3 development board with RS232 and RS485 modules, WS2812 LED, Wi-Fi and Bluetooth 5, and USB Type-C connector.

Quick specs
- MCU Type
- ESP32-S3 dual-core XTensa LX7 MCU
- Flash
- 8MB
- Wireless Functions
- Wi-Fi / Bluetooth 5 (LE)
- Programming Software
- Arduino, ESP-IDF
- Onboard
- WS2812(GPIO1)
- Buttons
- Reset+ Boot(GPIO0)+ IO2
















