At a glance
Made by LILYGO, this motherboard & development board is a good fit for makers, students and electronics hobbyists. Main specs: mcu ESP32-S3-WR0OM-1-N16R8; flash 16MB; psram 8MB.
Key Highlights
- MCU: ESP32-S3-WR0OM-1-N16R8
- Flash: 16MB
- PSRAM: 8MB
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| MCU | ESP32-S3-WR0OM-1-N16R8 |
|---|---|
| Flash | 16MB |
| PSRAM | 8MB |
| Wireless protocol | Wi-Fi & Bluetooth 5 (LE) |
| Onboard functions | 4 Buttons (PPT+Boot + PWR + Reset) |
| Supply Mode | USB / 21700 battery / 18650 battery + spring |
Overview
The LILYGO® T-TWR REV2.1 ESP32-S3 Walkie-Talkie Development Board L76K GNSS Module With 1.3 inch OLED PMU AXP2102 Battery Holder GPS, made by LILYGO, is listed in our motherboard & development board range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- MCU: ESP32-S3-WR0OM-1-N16R8 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Flash: 16MB (space for firmware, files or media)
- PSRAM: 8MB
- Wireless protocol: Wi-Fi & Bluetooth 5 (LE) (check your phone or controller supports the same Bluetooth version for full range)
- Onboard functions: 4 Buttons (PPT+Boot + PWR + Reset)
- Supply Mode: USB / 21700 battery / 18650 battery + spring (note the battery type so you can order spares or the right charger)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
L76K GNSS Module:
1.3 inch SH1106 OLED:
Sample Code For Reference [Github]
Other Support: SoftRF Ham Edition OpenRTX for T-TWR Plus ESP32APRS ArcticTracker
Package includes:









Quick specs
- MCU
- ESP32-S3-WR0OM-1-N16R8
- Flash
- 16MB
- PSRAM
- 8MB
- Wireless protocol
- Wi-Fi & Bluetooth 5 (LE)
- Onboard functions
- 4 Buttons (PPT+Boot + PWR + Reset)
- Supply Mode
- USB / 21700 battery / 18650 battery + spring
Cheaper Alternatives
10pcs 5V 1A 18650 TP4056 Lithium Battery Charger Module Charging Board with Protection Dual Functions 1A Li-ion

ESP32 D1 R32 Wireless Development Board WiFi bluetooth CH340 4MB Flash Compatible with Arduinos unos R3 for Wemos D1 Mini
ATMEGA328 328p 5V 16MHz Pro Mini PCB Module Board
Upgrade Options

HackRF One Software Defined Radio 1 MHz to 6 GHz 8-Bit Quadrature Sampling USB-Powered Open Source SDR Development Board

LILYGO® T-Deck Pro ESP32-S3 Development Board 4G/PCM5102A/LoRa/GPS E-Paper Touchscreen QWIIC Interface IoT Communication Device

LILYGO® T-Lora Pager ESP32-S3 LoRa SX1262 Wireless RF Module Dual-mode RFID/NFC RTC GNSS Ai Programmable Handheld AIoT Device











