
1 / 4 · Click to enlarge
At a glance
Made by LILYGO, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: mcu type ESP32-S3-WROOM-1 Xtensao 32-bit RISC-V MCU; supported Wi-Fi, Bluetooth 5 + Bluetooth Mesh; flash 16MB.
Key Highlights
- Wireless connection
- MCU Type: ESP32-S3-WROOM-1 Xtensao 32-bit RISC-V MCU
- Supported: Wi-Fi, Bluetooth 5 + Bluetooth Mesh
- Flash: 16MB
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| MCU Type | ESP32-S3-WROOM-1 Xtensao 32-bit RISC-V MCU |
|---|---|
| Supported | Wi-Fi, Bluetooth 5 + Bluetooth Mesh |
| Flash | 16MB |
| PSRAM | 8MB |
| Supported Languages | C/C++, MicroPython |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 8 × 5 × 4 cm |
Overview
The LILYGO® T7 S3 ESP32-S3 Development Board WIFI Bluetooth 5.0 32-bit LX7 Dual-core ESP32-S3-WROOM-1 Module 8MB PSRAM 16MB Flash, made by LILYGO, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- MCU Type: ESP32-S3-WROOM-1 Xtensao 32-bit RISC-V MCU (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Supported: Wi-Fi, Bluetooth 5 + Bluetooth Mesh (check your phone or controller supports the same Bluetooth version for full range)
- Flash: 16MB (space for firmware, files or media)
- PSRAM: 8MB
- Supported Languages: C/C++, MicroPython (confirm your cable or board uses the same connector)
- Shipping Weight: 0.015 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 8 × 5 × 4 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- T7 S3 is an ESP32 module based on ESP32-S3-WROOM-1, supports Wi-Fi Bluetooth 5, built-in Flash: 16MB PSRAM: 8MB.
- Onboard "USB 3.0" "Reset Switch" "Power (PWR) Switch" "4-PIN
- Support STEMMA QT/ Qwiic JST - SH 1.0mm
Package Includes:
1 X T7 S3 V1.1
2 X 2.54mm Male Pin (1*10P)
2 X 2.54mm Long Female Pin (1*10P)
2 X 2.54mm Short Female Pin (1*10P)
1 X
1 X JST 1.25mm 2P
Quick specs
- MCU Type
- ESP32-S3-WROOM-1 Xtensao 32-bit RISC-V MCU
- Supported
- Wi-Fi, Bluetooth 5 + Bluetooth Mesh
- Flash
- 16MB
- PSRAM
- 8MB
- Supported Languages
- C/C++, MicroPython
- Shipping Weight
- 0.015 kg
















