
1 / 3 · Click to enlarge
AI Summary
This 24V linear actuator delivers 1000N of force over a 100mm stroke at 7mm/s. Its IP55 protection and 1/4-inch mounting holes make it a robust choice for automation and heavy-duty positioning tasks.
Key Highlights
- 1000N force for heavy-duty pushing and pulling
- 100mm stroke length for moderate linear travel
- 7mm/s speed for controlled, precise movement
- 24V DC operation for industrial and automation systems
- IP55 protection against dust and water jets
- 1/4-inch mounting holes for easy installation
Ideal For
- Industrial automation engineers
- Heavy machinery technicians
- Robotics and DIY automation builders
- Valve and damper control specialists
- Material handling system designers
Buying Tip
Confirm your power supply can deliver the required current for the 1000N load, and check that the 100mm stroke and 220mm body length fit your mounting space.
Elecvora expert review
Our verdict
This actuator offers a solid balance of force and control for industrial and automation tasks. Its IP55 rating and standard mounting holes make it easy to integrate into demanding environments.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High 1000N force for heavy loads
- IP55 protection against dust and water
- Standard 1/4-inch mounting holes
- Wide operating temperature range
- Compact 36mm motor diameter
Cons
- Slow 7mm/s speed may not suit fast-cycle applications
- Requires separate 24V power supply and controller
- No mounting hardware included
Best for
Industrial automation and heavy-duty positioning tasks
Not ideal for
High-speed or rapid-cycle applications
Specifications
| Operating Voltage (VDC) | 24V |
|---|---|
| Stroke Length (mm) | 100 |
| Force (N) | 1000 |
| Speed (mm/s) | 7 |
| Operating Temperature (°C) | -20 to +63 |
| Mounting Hole Diameter (mm) | 1/4” (6.4mm) |
| Protection level | IP55 |
| Motor diameter (mm) | 36 mm |
| Length (mm) | 220 |
| Width (mm) | 77 |
| Weight (g) | 871 |
| Shipping Weight | 0.911 kg |
| Shipping Dimensions | 23 × 9 × 6 cm |
What's in the box
- 1 x Linear Actuator Stroke Length 100MM, 7mm/S, 1000N, 24V
Frequently Asked Questions
What is the stroke length of this actuator?
What force can this actuator exert?
What voltage does this actuator require?
Is this actuator waterproof?
What is included in the package?
What is the operating temperature range?
Overview
The Generic 24V Linear Actuator is a compact, high-force electric cylinder that turns rotary motor power into straight-line motion. With a 100mm stroke, it extends and retracts over a useful range for many positioning tasks. The 1000N force rating means it can push or pull loads up to roughly 225 pounds, making it suitable for demanding mechanical systems. Speed is set at 7mm/s, which is deliberately moderate for controlled, precise movement rather than rapid cycling.
Key Features
- 100mm stroke length: Defines the total travel distance of the actuator rod.
- 1000N force: Provides substantial push/pull strength for heavy loads.
- 7mm/s speed: Ensures steady, controlled motion for precision applications.
- 24V DC operation: Compatible with common industrial and automation power supplies.
- IP55 protection: Resists dust ingress and water jets from any direction.
- 1/4-inch mounting holes: Standard 6.4mm holes for easy pin or bolt mounting.
Specifications Explained
The 100mm stroke is the distance the rod moves from fully retracted to fully extended. This is a common size for applications that need moderate travel without a very long body. The 1000N force indicates the actuator can handle loads up to about 100kg (225 lbs) under ideal conditions, though actual capacity depends on mounting and load direction. The 7mm/s speed means it takes roughly 14 seconds to complete a full 100mm stroke, which is well suited to applications where smooth, controlled motion matters more than speed. The 24V DC motor draws power from a 24V supply, and the 36mm motor diameter keeps the unit relatively compact. The IP55 rating means it is protected against dust and low-pressure water jets, so it can be used in dusty or damp environments. The 1/4-inch (6.4mm) mounting holes at each end allow secure attachment with pins or bolts. The actuator measures 220mm in length and 77mm in width, and weighs 871g.
Compatibility and Requirements
This actuator requires a 24V DC power source capable of supplying the necessary current for the motor under load. It does not include a power supply, controller, or mounting hardware. The 1/4-inch mounting holes are compatible with standard clevis pins or bolts of that diameter. Ensure your power supply and wiring can handle the actuator's current draw, which will vary with load. The operating temperature range is -20 to +63°C, so avoid exposing it to conditions outside this range.
Typical Uses
Because of its high force and moderate speed, this actuator is well suited to industrial automation, heavy machinery adjustment, valve control, platform positioning, and other tasks that require powerful, precise linear motion. It can also be used in DIY automation projects, robotics, and material handling systems where a 24V supply is available.
What's in the Box
1 x Linear Actuator Stroke Length 100MM, 7mm/S, 1000N, 24V
Quick specs
- Operating Voltage (VDC)
- 24V
- Stroke Length (mm)
- 100
- Force (N)
- 1000
- Speed (mm/s)
- 7
- Operating Temperature (°C)
- -20 to +63
- Mounting Hole Diameter (mm)
- 1/4” (6.4mm)













