
1 / 4 · Click to enlarge
AI Summary
A compact 12V linear actuator with 100mm stroke and 1500N force for smooth, quiet linear motion. Built-in limit switches and IP55 protection make it ready for automated furniture, medical equipment, and light industrial use.
Key Highlights
- 1500N maximum force for pushing and pulling loads
- 100mm stroke with 7mm/s no-load speed
- IP55-rated for protection against dust and water jets
- Built-in limit switches prevent over-travel
- Quiet operation at approximately 45dB
- Self-locking design holds position when powered off
Ideal For
- DIY automation enthusiasts building motorized projects
- Medical and care facilities needing adjustable bed or chair mechanisms
- Solar tracking system builders
- Industrial and agricultural equipment designers
- Furniture makers creating adjustable sofas and TV lifts
Buying Tip
Confirm your power supply can deliver at least 2A at 12V and that your mounting hardware matches the 1/4-inch (6.4mm) hole diameter before ordering.
Elecvora expert review
Our verdict
This 12V linear actuator offers a practical balance of force, speed, and size for light to medium-duty automation. Its IP55 rating and self-locking design make it versatile for indoor and sheltered outdoor use.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High 1500N force in a compact 889g package
- Built-in limit switches protect the mechanism
- IP55 protection for dusty or damp environments
- Quiet 45dB operation suitable for residential settings
Cons
- Not designed for continuous duty; requires rest periods
- Slower speed (7mm/s) may not suit fast-cycle applications
- Requires a separate 12V power supply and reversing switch
Best for
Automated furniture, medical beds, and light industrial projects needing reliable linear motion
Not ideal for
High-speed or continuous-operation applications, or environments requiring full waterproofing
Specifications
| Operating Voltage (VDC) | 12 |
|---|---|
| Stroke Length (mm) | 100 |
| Force (N) | 1500 |
| Speed (mm/s) | 7 |
| Operating Temperature (°C) | -20 to +63 |
| Mounting Hole Diameter (mm) | 1/4” (6.4mm) |
| Protection level | IP55 |
| Max. Static Load | 337.2 lbs. (1500 Newtons) |
| Max. Current Draw (A) | ≤2A |
| Motor diameter (mm) | 36 mm |
| Speed at No Load (mm/Sec) | 0.28in/sec (7 mm /sec) |
| Speed at Full Load (mm/Sec) | 0.22in/sec (5.5 mm /sec) |
| Noise (dB) | 45 dB |
| Length (mm) | 210 |
| Width (mm) | 74 |
| Weight (g) | 889 |
| Shipping Weight | 0.9 kg |
| Shipping Dimensions | 22 × 9 × 5 cm |
What's in the box
- 1 x Linear Actuator Stroke Length 100MM, 7mm/S, 1500N, 12V
Frequently Asked Questions
What voltage does this linear actuator require?
How much force can it push or pull?
Does it have built-in limit switches?
What is included in the package?
Can it be used outdoors?
How do I control the direction of movement?
Overview
The Generic 12V Linear Actuator is a compact electric push rod that transforms the rotary motion of a permanent-magnet DC motor into linear reciprocating movement. With a 100mm stroke and a maximum force of 1500N, it provides controlled pushing and pulling for a wide range of automation tasks. The aluminium frame and extension tube keep the unit lightweight at 889g while maintaining rigidity, and the built-in limit switch stops travel at the end of the stroke to protect the mechanism.
Key Features
- High force in a small package: Delivers up to 1500N (337.2 lbs) of static load capacity.
- Smooth, controlled speed: 7mm/s at no load and 5.5mm/s at full load for steady movement.
- Weather-resistant: IP55 protection allows operation in dusty or damp environments.
- Quiet operation: Noise level around 45dB, suitable for residential and medical settings.
- Self-locking: Holds its position when power is removed, adding safety and efficiency.
- Built-in limit switches: Prevents damage from over-extension or over-retraction.
Specifications Explained
Operating voltage (12VDC): This actuator requires a 12V DC power source; do not connect directly to AC power. Stroke length (100mm): The rod extends and retracts over a 100mm range, ideal for compact mechanisms. Force (1500N): Maximum static load is 1500 Newtons (about 337 lbs), suitable for medium-duty applications. Speed (7mm/s): At no load the actuator moves at 7mm per second; under full load it slows to about 5.5mm/s. Current draw (≤2A): The motor draws up to 2 amps, so ensure your power supply can handle this. Protection level (IP55): Resists dust ingress and low-pressure water jets, but not immersion. Operating temperature (-20°C to +63°C): Works in cold and moderately hot environments. Mounting hole diameter (1/4 inch / 6.4mm): Fits standard 1/4-inch clevis pins or bolts for easy installation.
Compatibility and Requirements
This actuator operates on 12V DC only. It requires a suitable 12V power supply capable of delivering at least 2A, and a reversing switch or relay for direction control. The 1/4-inch mounting holes accept common clevis pins or bolts. The actuator is not designed for continuous duty; allow rest periods between cycles to extend motor life. Avoid exceeding the 1500N load limit and do not force the actuator to stop mid-stroke while powered.
Typical Uses
Common applications include electric beds and medical chairs, adjustable sofas and TV lift tables, solar tracking systems, agricultural machinery, and light industrial automation. It is also suitable for camera sliders, ventilation controls, and DIY robotics projects where controlled linear motion is needed.
What's in the Box
Package includes 1 x Linear Actuator Stroke Length 100MM, 7mm/S, 1500N, 12V.

Quick specs
- Operating Voltage (VDC)
- 12
- Stroke Length (mm)
- 100
- Force (N)
- 1500
- Speed (mm/s)
- 7
- Operating Temperature (°C)
- -20 to +63
- Mounting Hole Diameter (mm)
- 1/4” (6.4mm)













