
1 / 4 · Click to enlarge
AI Summary
This 24V linear actuator delivers a 500mm stroke and 1000N force at 7mm/s, with a self-locking design and IP54 protection. It is a practical choice for automating adjustable furniture, solar trackers, and light industrial mechanisms.
Key Highlights
- 500mm stroke length for long-travel applications
- 1000N pushing force with self-locking at rest
- 7mm/s speed for controlled, steady movement
- 24V DC operation with ≤2A current draw
- IP54-rated for dust and splash resistance
- Built-in limit switch and aluminium housing
Ideal For
- DIY enthusiasts building adjustable furniture
- Engineers designing solar tracking systems
- Makers automating home or workshop projects
- Technicians maintaining agricultural equipment
- Hobbyists creating camera sliders or motion rigs
Buying Tip
Verify your power supply can provide 24V DC at 2A and that your mechanism allows for the 500mm stroke and 68cm retracted length.
Elecvora expert review
Our verdict
A solid mid-range actuator for projects needing long stroke and moderate force. Its self-locking feature and IP54 rating add practicality for many automation tasks.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Long 500mm stroke for extended travel
- Self-locking holds position without power
- IP54 protection against dust and splashes
- Built-in limit switch for safety
- Aluminium frame is lightweight and durable
Cons
- Requires a separate 24V power supply and controller
- Relatively slow speed at 7mm/s
- Not designed for high-frequency operation
Best for
Automated furniture, solar trackers, and light industrial positioning
Not ideal for
High-speed or high-cycle applications, or direct AC connection
Specifications
| Operating Voltage (VDC) | 24 |
|---|---|
| Stroke Length (mm) | 500 |
| Force (N) | 1000 |
| Speed (mm/s) | 7 |
| Max. Current Draw (A) | ≤2A |
| Mounting Hole Diameter (mm) | 1/4” (6.4mm) |
| Protection level | IP54 |
| Max. Static Load | 337.2 lbs. ( 1500 Newtons ) |
| Motor diameter (mm) | 39 mm |
| Speed at No Load (mm/Sec) | 7 mm /sec |
| Length (cm) | 68cm |
| Width (cm) | 8cm |
| Height (cm) | 4cm |
| Shipping Weight | 1.392 kg |
| Shipping Dimensions | 68 × 8 × 4 cm |
What's in the box
- 1 x Linear Actuator (500mm stroke, 7mm/s, 1000N, 24V)
Frequently Asked Questions
Can this actuator be used with a 12V power supply?
Does it come with mounting brackets?
What is the maximum load it can push?
Is the actuator self-locking?
Can it be used outdoors?
How do I reverse the direction?
Overview
This linear actuator converts the rotary motion of a 24V DC motor into precise linear movement, providing a 500mm stroke and up to 1000N of force. It is a compact, self-contained unit with an aluminium frame and extension tube, designed for integration into automated systems where controlled push or pull motion is required. The built-in limit switch stops the actuator at the end of travel, protecting the motor and mechanism.
Key Features
- 500mm stroke: Long travel suitable for lifting, tilting, and sliding mechanisms.
- 1000N force: Enough to move moderate loads in furniture, solar trackers, and small machinery.
- 7mm/s speed: Delivers smooth, controlled motion for positioning tasks.
- Self-locking: Holds position when power is removed, improving safety and energy efficiency.
- IP54 protection: Resists dust and water splashes for use in varied environments.
- Aluminium construction: Lightweight yet durable, with a moisture-proof surface.
- Built-in limit switch: Prevents over-travel and extends service life.
Specifications Explained
The 24V DC operating voltage is common in industrial and automotive systems; ensure your power supply can deliver at least 2A. The 500mm stroke defines the total linear travel, while the 7mm/s speed indicates it takes roughly 71 seconds to extend or retract fully. With 1000N of force, the actuator can push or pull loads up to approximately 102kg vertically, but always account for leverage and friction. The 1/4-inch (6.4mm) mounting holes fit standard clevis or pin mounts. The motor diameter is 39mm, and the unit measures 68cm in length when retracted. Maximum static load is 1500N, but dynamic loads should not exceed 1000N.
Compatibility and Requirements
This actuator requires a 24V DC power supply capable of supplying up to 2A. It is not suitable for direct AC connection. A reversing switch or motor controller is needed to extend and retract the actuator. The mounting holes are 1/4 inch (6.4mm) in diameter, compatible with common hardware. Ensure the actuator is not subjected to loads exceeding 1000N during operation, and avoid high-frequency use or high-temperature environments to maximise service life.
Typical Uses
Common applications include adjustable beds and massage chairs, TV lift tables, electric sofas, solar tracking systems, agricultural equipment, and light industrial automation. It can also be used in DIY projects requiring linear motion, such as camera sliders or automated hatches.
What's in the Box
1 x Linear Actuator (500mm stroke, 7mm/s, 1000N, 24V). Mounting hardware and power supply are not included.

Quick specs
- Operating Voltage (VDC)
- 24
- Stroke Length (mm)
- 500
- Force (N)
- 1000
- Speed (mm/s)
- 7
- Max. Current Draw (A)
- ≤2A
- Mounting Hole Diameter (mm)
- 1/4” (6.4mm)













