Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This 24V linear actuator provides a 500mm stroke with 1500N of force and a 7mm/s no-load speed. Its built-in limit switch and 1000N self-locking force make it a reliable choice for automation and adjustable mechanisms.

Key Highlights

  • 500mm stroke with 1500N maximum push force
  • 24V DC operation with 7mm/s no-load speed
  • IP55 protection against dust and water splashes
  • Built-in limit switch for end-of-stroke control
  • 1000N self-locking force holds position when unpowered
  • Quiet operation at approximately 45dB

Ideal For

  • Automation engineers building linear motion systems
  • Furniture makers producing adjustable beds and sofas
  • Medical equipment technicians servicing beds and chairs
  • Solar tracking system installers
  • Agricultural machinery designers

Buying Tip

Confirm your power supply delivers a stable 24V DC and that the 500mm stroke and 1500N force meet your load and travel requirements before ordering.

Elecvora expert review

Our verdict

A solid mid-range actuator for projects that need a long stroke and high force at a moderate speed. The IP55 rating and built-in limit switch add convenience, though the 24V requirement means you will need a suitable power supply.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • High 1500N force for demanding push/pull tasks
  • Long 500mm stroke suits large movements
  • Self-locking design holds position without power
  • IP55 protection for dusty or damp environments

Cons

  • Requires a separate 24V DC power supply
  • Relatively slow speed at 7mm/s no load
  • Not suitable for continuous high-frequency operation

Best for

Automation and adjustable furniture projects needing a long stroke and high force.

Not ideal for

High-speed or high-cycle applications, or use with AC power.

Specifications

Operating Voltage (VDC)24
Stroke Length (mm)500
Force (N)1500
Speed (mm/s)7
Mounting Hole Diameter (mm)1/4” (6.4mm)
Protection levelIP55
Max. Static Load337.2 lbs. ( 1500 Newtons )
Motor diameter (mm)39 mm
Speed at No Load (mm/Sec)7 mm /sec
Speed at Full Load (mm/Sec)5.5 mm /sec
Self Locking Force (N)1000N
Noise (dB)45 dB
Length (mm)670
Width (mm)75
Weight (g)1479
Shipping Weight1.5 kg
Shipping Dimensions63 × 9 × 5 cm

What's in the box

  • 1 x Linear Actuator (500mm stroke, 24V, 1500N)

Frequently Asked Questions

What voltage does this actuator require?
It operates on 24V DC only. Connecting it to AC power or a different voltage will damage the unit.
Can the actuator hold a load when power is off?
Yes, it has a self-locking force of 1000N, meaning it can hold a static load up to that value without power.
What is the maximum stroke length?
The stroke length is 500mm, which is the total travel distance from fully retracted to fully extended.
Is a power supply included?
No, the package includes only the linear actuator. You will need a separate 24V DC power supply.
How do I mount the actuator?
Use 1/4-inch (6.4mm) pins or bolts through the mounting holes at each end. Ensure the actuator is aligned with the load to avoid side forces.
What is the noise level?
The actuator produces approximately 45dB of noise during operation, which is relatively quiet for this type of device.

Overview

This linear actuator is a 24V DC electric push rod that turns motor rotation into straight-line motion over a 500mm stroke. It is built around a permanent magnet DC motor, a reduction gear, a screw and nut mechanism, and an aluminium extension tube. The result is a compact unit that can push or pull loads up to 1500N at a no-load speed of 7mm/s. With a 1000N self-locking force, the actuator holds its position when power is removed, which is useful for applications that must stay put without continuous power.

Key Features

  • Aluminium frame and extension tube: Lightweight construction with a moisture-proof surface.
  • Built-in limit switch: Stops the stroke at its end points to protect the mechanism.
  • Low noise: Rated at approximately 45dB for quieter operation.
  • Carbon brush motor: Rated for more than 50,000 operations.
  • IP55 protection: Resists dust and water splashes in typical indoor and sheltered environments.

Specifications Explained

Stroke length (500mm): The distance the rod travels from fully retracted to fully extended. Check that this matches the movement your project requires.

Force (1500N): The maximum push or pull force. The self-locking force is 1000N, meaning the actuator can hold a static load up to that value when unpowered.

Speed (7mm/s no load, 5.5mm/s full load): How fast the rod moves. Heavier loads reduce speed slightly, which is normal for this type of actuator.

Voltage (24V DC): The actuator must be powered from a 24V DC supply. Connecting it directly to AC power will damage it.

Mounting hole diameter (1/4 inch / 6.4mm): The bore size for mounting pins or bolts at each end.

Motor diameter (39mm): The diameter of the motor housing, useful for checking clearance in tight spaces.

Overall length (670mm): The retracted length of the actuator, including mounting points.

Weight (1479g): The net weight of the actuator alone.

Compatibility and Requirements

This actuator requires a 24V DC power source with sufficient current capacity for the motor. It is not designed for direct connection to AC mains. The mounting holes accept 1/4-inch (6.4mm) pins or bolts. Ensure that the load does not exceed 1500N and that the stroke is not forced to stop before the limit switch is reached. Do not operate continuously at high frequency or in high-temperature environments, as these conditions can shorten service life.

Typical Uses

Common applications include automated furniture such as TV lift tables and electric sofas, medical equipment like electric beds and wheelchairs, solar tracking systems, agricultural machinery, and industrial lifting mechanisms. The actuator can also be used in camera frames, dental chairs and other equipment that needs controlled linear movement.

What's in the Box

1 x Linear Actuator (500mm stroke, 24V, 1500N)

Linear Actuator Stroke Parts

Quick specs

Operating Voltage (VDC)
24
Stroke Length (mm)
500
Force (N)
1500
Speed (mm/s)
7
Mounting Hole Diameter (mm)
1/4” (6.4mm)
Protection level
IP55
See all specifications