At a glance
This power supply module is a good fit for makers, students and electronics hobbyists. Main specs: parameter name Parameter value; module model Multiple power supply; module type Switching power supply. Check that your power source supplies 13V-32V before connecting it.
Key Highlights
- Adjustable settings
- Parameter name: Parameter value
- Module model: Multiple power supply
- Module type: Switching power supply
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Parameter name | Parameter value |
|---|---|
| Module model | Multiple power supply |
| Module type | Switching power supply |
| Input voltage | 13V-32V |
| The output voltage | Multipath |
| Output current | 3A (MAX) |
| Conversion efficiency | 85% |
| Output Power | 9.9W |
| 15W | 5V |
| 36W | 12V |
| 36W | ADJ |
| Static power | 26mA |
| Operating frequency | 150KHz |
| Output ripple | 15mV |
| Better than 60mV | 12V@2A load test |
| Module enable | without |
| Module protection | Reverse connection |
| Module features | Many kinds |
| Module application | Many kinds |
| Module weight | 65g |
| Module size | 101 X 68 X 12 |
| Module heat | The greater the load, the greater the heat |
| Operating temperature | 0- 70℃ |
Overview
The LM2596 Switching Power Supply Module 3.3V 5V 12V ADJ Adjustable Voltage Output 3A High Efficiency Low Noise for Industrial LED Automation Control is listed in our power supply module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Parameter name: Parameter value
- Module model: Multiple power supply
- Module type: Switching power supply
- Input voltage: 13V-32V (match this to your power supply; too high a voltage can damage the part)
- The output voltage: Multipath (match this to your power supply; too high a voltage can damage the part)
- Output current: 3A (MAX) (your supply must deliver at least this much current)
- Conversion efficiency: 85%
- Output Power: 9.9W
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Product Introduction:
LM2596 is a step-down power management monolithic integrated circuit switching voltage regulator, capable of outputting 3A drive current, while having good linearity and load regulation characteristics. This module integrates 4 LM2596, which can output four sets of power supplies of 3.3V, 5V, 12V and ADJ at the same time. The module is laid out and wired in strict accordance with the design specifications of the power supply circuit the materials are generous, using SMD aluminum electrolytic capacitors, high-Q high-power inductors In order to ensure the stable output voltage, the window treatment on the back of the PCB board is more conducive to the heat dissipation of the LM2596 chip.
It is suitable for the power demand of students in learning competitions and company or personal project development
Precautions for using the module:
(1)The module is a step-down module, and the input voltage needs to be greater than the output 1Vto stabilize the output.
(2)Module heating is mainly determined by the input and output voltage difference and the load current. Please select and use the power module reasonably. Generally, 30% of the margin should be reserved.
(3)The module generates heat during use, please increase the heat dissipation according to the actual situation. When carrying a large load, you can add heat sinks, air cooling, etc appropriately.
(4)When using capacitive or inductive loads, the instantaneous current of the load cannot be too large, otherwise the module may be damaged.
Frequently Asked Questions:
Q: What is the output range of ADJ? What is the output current?
A: The output range of ADJ is 1.2V to Vin-1V. Maximum 3A, when the input and output voltage difference is large, the output current will be less than 3A.
Q: Can module outputs be connected in parallel or in series?
A: When the output voltage is equal, it can be connected in parallel, but not connected in series. Each channel is independent, but it will not be isolated and cannot be connected in series.
Q: Is the mounting hole grounded? Can the module output negative voltage?
A: The mounting hole is not grounded, and the module can only be used for positive and negative voltage output.
Features:
1. Multi-channel Output: The module integrates four LM2596 regulators, offering outputs of 3.3V, 5V, 12V, and an adjustable voltage simultaneously, making it versatile for various electronic projects.
2. High Efficiency: With a conversion efficiency of 85%, this power supply module optimizes energy use while reducing waste heat, ensuring reliable performance in demanding applications.
3. Robust Design: The module includes reverse connection protection and uses high-quality SMD aluminum electrolytic capacitors and high-Q inductors to provide stable output voltage and longevity.
4. Compact and Lightweight: Weighing only 65g and measuring 101mm x 68mm x 12mm, this module is convenient for integration into small projects, without compromising on power delivery.
5. Versatile Applications: Ideal for industrial automation control, LED lighting systems, communication equipment, power equipment, and more, this module meets the needs of various professional and hobbyist applications.
Package Included:
1 x LM2596 Multi Channel Switching Power Supply Module




Quick specs
- Parameter name
- Parameter value
- Module model
- Multiple power supply
- Module type
- Switching power supply
- Input voltage
- 13V-32V
- The output voltage
- Multipath
- Output current
- 3A (MAX)








