
1 / 4 · Click to enlarge
AI Summary
A compact 915 MHz LoRa antenna with 2.2 dBi omnidirectional gain and an RP-SMA connector. Its flexible right-angle shaft makes it a simple spare or upgrade for 915 MHz radio modules.
Key Highlights
- 915 MHz center frequency tuned for LoRa and other 915 MHz links
- 2.2 dBi peak gain with an omnidirectional radiation pattern
- RP-SMA connector mates with common LoRa boards and gateways
- Flexible main shaft resists damage from knocks and bending
- VSWR below 2.0 for low reflected power at 50 Ω
- Rated for –20°C to +85°C operating temperatures
Ideal For
- LoRa and IoT developers building 915 MHz sensor nodes
- Makers replacing a damaged antenna on a 915 MHz module
- RF hobbyists assembling compact right-angle antenna setups
- Integrators adding an external antenna to a compatible gateway
- Students learning about 915 MHz radio links and antenna basics
Buying Tip
Check that your device has an RP-SMA socket and operates at 915 MHz before ordering, since this antenna will not fit SMA or other connector types.
Elecvora expert review
Our verdict
A sensible low-cost 915 MHz antenna for LoRa and RF projects, with realistic 2.2 dBi gain and a connector that suits many boards. It is a spare or starter antenna rather than a long-range solution.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Correct 915 MHz center frequency for LoRa links
- RP-SMA connector fits many common modules
- Flexible shaft and right-angle mount aid durability and fit
- VSWR below 2.0 keeps reflected power low
- Very light and compact to ship and install
Cons
- 2.2 dBi gain limits range compared with larger antennas
- RP-SMA only, so SMA devices need an adapter
- No cable or mounting hardware included
Best for
Makers and IoT developers needing a compact 915 MHz spare or upgrade antenna
Not ideal for
Users needing high-gain directional coverage or long-distance links
Specifications
| Item Type | Lora Antenna |
|---|---|
| Operating Frequency (MHz) | 915 |
| Gain | 2.2 dBi |
| VSWR | <2.0 |
| Antenna Gain | 2.2 dBi (peak) |
| Center Frequency | 915 MHz |
| Wavelength | ¼-wave |
| Connector Type | RP-SMA |
| Operating Temperature (°C) | –20°C to +85°C |
| Impedance (Ω) | 50 |
| Shipping Weight | 0.008 kg |
| Shipping Dimensions | 12 × 11 × 1 cm |
What's in the box
- 1 x 915 MHz LoRa Antenna
Frequently Asked Questions
What frequency does this antenna work on?
Will it fit my LoRa board?
Does it need a power supply?
What is included in the package?
Can I use it outdoors?
How much gain does it provide?
Overview
The Generic 915 MHz LoRa antenna is a small, right-angle whip built for 915 MHz radio equipment. It uses a ¼-wave element with a center frequency of 915 MHz and a peak gain of 2.2 dBi. Because the pattern is omnidirectional, the antenna sends and receives in all directions around its axis, which suits nodes whose orientation is not fixed. The RP-SMA connector and 50 Ω impedance are standard for many LoRa modules and gateways, so swapping a damaged or basic antenna is straightforward. The flexible main shaft absorbs minor impacts, and the operating range of –20°C to +85°C covers typical indoor and sheltered outdoor use.
Key Features
- 915 MHz center frequency for LoRa and similar 915 MHz links
- 2.2 dBi peak gain from a ¼-wave element
- Omnidirectional pattern for even coverage around the antenna
- RP-SMA connector with 50 Ω impedance
- VSWR below 2.0 to limit reflected power
- Flexible main shaft and right-angle mount
- Lightweight at 0.008 kg shipping weight
Specifications Explained
Frequency and gain
The 915 MHz center frequency puts the antenna in the band used by many LoRa networks. A 2.2 dBi peak gain is modest and realistic for a ¼-wave whip: it adds a little reach over a basic stub without creating a narrow, hard-to-aim beam.
VSWR and impedance
With a VSWR below 2.0 at 50 Ω, most of the transmitter power reaches the antenna instead of reflecting back to the radio. That matters for small LoRa radios, which have limited output power to spare.
Connector and build
The RP-SMA connector is a common interface on 915 MHz boards and gateways, so check your device's socket before ordering. The flexible shaft and right-angle mount help the antenna fit tight enclosures and survive everyday handling. The rated temperature range is –20°C to +85°C.
Compatibility and Requirements
This antenna requires a device with an RP-SMA antenna socket operating at 915 MHz and 50 Ω impedance. It is not a complete radio: it needs a compatible LoRa or RF module or gateway to connect to. Confirm both the connector type and the operating frequency of your equipment before purchase.
Typical Uses
- Replacing a damaged or missing antenna on a 915 MHz LoRa node
- Adding an external antenna to a compatible 915 MHz module
- Small IoT and sensor projects that need an omnidirectional whip
- RF hobby builds where a compact right-angle antenna fits best
What's in the Box
One 915 MHz LoRa antenna is included. No cable, adapter or mounting hardware is supplied.
Quick specs
- Item Type
- Lora Antenna
- Operating Frequency (MHz)
- 915
- Gain
- 2.2 dBi
- VSWR
- <2.0
- Antenna Gain
- 2.2 dBi (peak)
- Center Frequency
- 915 MHz













