Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This product is a good fit for makers, students and electronics hobbyists. Main specs: soc ESP32-S3FN8; input voltage DC 5 V; hmi Programmable physical button × 1, programmable RGB LED (WS2812B-2020) × 1. Check that your power source supplies DC 5 V before connecting it.

Key Highlights

  • SoC: ESP32-S3FN8
  • Input Voltage: DC 5 V
  • HMI: Programmable physical button × 1, programmable RGB LED (WS2812B-2020) × 1

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

SoCESP32-S3FN8
DC-DCMUN3CAD01-SC
Flash8 MB
Input VoltageDC 5 V
HMIProgrammable physical button × 1, programmable RGB LED (WS2812B-2020) × 1
Antenna Type2.4 GHz 3D antenna
Module Resource I/FTouch Sensor, SD/SDIO/MMC Host Ctrl, SPI, SDIO/SPI Slave Ctrl, EMAC, Motor PWM, LED PWM, UART, I²C, I²S, GPIO, Pulse Counter
IO Interfaces × 23G0/G1/G2/G3/G4/G5/G6/G7/G8/G9/G10/G11/G12/G13/
IO Pitch2.54 mm and 1.27 mm
LCD FPC Pitch0.5 mm @ 12 P or 8 P
Operating Temp.0 ~ 40 °C
Product Size26.0 × 18.0 × 4.7 mm
Product Weight2.9 g
Package Size138.0 × 93.0 × 10.5 mm
Gross Weight7.1 g

Overview

The M5Stack M5stampS3A based ESP32-S3FN8 embedded Module Programmable Development Board is listed in our range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • SoC: ESP32-S3FN8
  • DC-DC: MUN3CAD01-SC
  • Flash: 8 MB (space for firmware, files or media)
  • Input Voltage: DC 5 V (match this to your power supply; too high a voltage can damage the part)
  • HMI: Programmable physical button × 1, programmable RGB LED (WS2812B-2020) × 1
  • Antenna Type: 2.4 GHz 3D antenna (make sure the rest of your system works at this frequency)
  • Module Resource I/F: Touch Sensor, SD/SDIO/MMC Host Ctrl, SPI, SDIO/SPI Slave Ctrl, EMAC, Motor PWM, LED PWM, UART, I²C, I²S, GPIO, Pulse Counter
  • IO Interfaces × 23: G0/G1/G2/G3/G4/G5/G6/G7/G8/G9/G10/G11/G12/G13/ (confirm your cable or board uses the same connector)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Description: Stamp-S3A is a highly-integrated embedded module based on the Espressif ESP32-S3FN8. It is equipped with a 240 MHz Xtensa® 32-bit LX7 dual-core processor, integrates 8 MB Flash, a programmable RGB LED, and a user button. The deeply-optimized 3D antenna design offers stronger wireless communication performance. Twenty-three GPIOs are broken out and provided via 1.27 mm / 2.54 mm pitch SMT/DIP pin headers or sockets, allowing effortless PCB integration and enabling developers to build applications rapidly.

Features: ESP32-S3FN8 (2.4 GHz Wi-Fi) Minimum-system board Rich I/Obreakout supporting multiple application forms (SMT,DIP,1fly-wire,Unit) Integrated programmable RGB LED and button Development Platform: UiFlow2 ArduinoIDE ESP-IDF PlatformIO

Specifications: 

 

Package Includes: 1 x Stamp-S3A 1 x HY2.0-4P Terminal 1 x 2.54-9 P Male Header 1 x 2.54-6 P Male Header 1 x Hex Key L-Shape 1.5 mm (For M2 Screw) 1 x Pin Sticker

Product Comparison:
 


Product Safety Information

Quick specs

SoC
ESP32-S3FN8
DC-DC
MUN3CAD01-SC
Flash
8 MB
Input Voltage
DC 5 V
HMI
Programmable physical button × 1, programmable RGB LED (WS2812B-2020) × 1
Antenna Type
2.4 GHz 3D antenna
See all specifications