Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by MACHDATUM, this wifi routers and network adapters is a good fit for everyday home and hobby use. Main specs: item type RS485 to WiFi/Ethernet Communication Gateway; model no. / name RS485 to Ethernet/WiFi Bridge; power rating 3. Check that your power source supplies 6 to 36 before connecting it.

Key Highlights

  • Item Type: RS485 to WiFi/Ethernet Communication Gateway
  • Model No. / Name: RS485 to Ethernet/WiFi Bridge
  • Power Rating: 3

Ideal For

  • Everyday use

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Item TypeRS485 to WiFi/Ethernet Communication Gateway
Model No. / NameRS485 to Ethernet/WiFi Bridge
Voltage Rating (V)6 to 36
Power Rating3
Baud Rate (bps)50 – 921600 bps
Communication InterfaceRS485 (Half-duplex)
Supported protocolsModbus RTU, Modbus TCP/IP
Power Supply Voltage (V)DC 9V to 36V (typical 12V or 24V DC)
Operating Temperature (°C)-40 to +85
Length (mm)100
Width (mm)80
Weight (g)185
Shipping Weight0.23 kg
Shipping Dimensions12 × 11 × 5 cm

Overview

The MDIM-485/WL - Single-Port RS485 to Ethernet / WLAN Bridge, made by MACHDATUM, is listed in our wifi routers and network adapters range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: RS485 to WiFi/Ethernet Communication Gateway (2.4 GHz reaches further, 5 GHz is faster at short range)
  • Model No. / Name: RS485 to Ethernet/WiFi Bridge (2.4 GHz reaches further, 5 GHz is faster at short range)
  • Voltage Rating (V): 6 to 36 (match this to your power supply; too high a voltage can damage the part)
  • Power Rating: 3
  • Baud Rate (bps): 50 – 921600 bps
  • Communication Interface: RS485 (Half-duplex) (confirm your cable or board uses the same connector)
  • Supported protocols: Modbus RTU, Modbus TCP/IP (confirm your cable or board uses the same connector)
  • Power Supply Voltage (V): DC 9V to 36V (typical 12V or 24V DC) (match this to your power supply; too high a voltage can damage the part)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The MDIM-485/WL - Single-Port RS485 to Ethernet / WLAN Bridge is designed to extend RS485 networks into IP communication systems with the flexibility of 10 Mbps Ethernet and 2.4 GHz Wi-Fi (150 Mbps). MDIM-485/WL - Single-Port RS485 to Ethernet / WLAN Bridge functions as a transparent bridge, delivering accurate and real-time Modbus RTU to Modbus TCP conversion so supervisory systems and SCADA platforms can communicate with multiple RTU slaves without hardware changes.

Setup is simplified through the dedicated Configuration Application, which provides quick access to network parameters and device settings. With dual DC power input support, a wide operating voltage range, and built-in surge and ESD protection, the gateway ensures reliable performance in demanding industrial conditions.

Note: Refer to datasheet in the ATTACHMENTS section for more info. regd. the product.

Features:

  1. Selectable Network Support – The MDIM-485/WL can be configured to operate over either 10/100 Mbps Ethernet or 2.4 GHz Wi-Fi (150 Mbps), allowing deployment in both wired and wireless environments.
  2. Seamless Modbus Bridging – Provides transparent conversion from Modbus RTU to Modbus TCP/IP, enabling easy integration of RS485 devices into IP-based supervisory systems.
  3. Multi-Slave Device Support – Allows multiple RS485 slave devices to be connected and managed through a single gateway for efficient communication.
  4. Low-Latency Communication – Ensures fast and stable data exchange, making it suitable for time-sensitive industrial applications.
  5. Configurable Network Switchover – Users can easily switch between Ethernet and Wi-Fi operation depending on the network requirements of their system.
  6. Dedicated Configuration Application – Includes a simple software interface for setting parameters, monitoring status, and managing network configurations.
  7. Advanced Electrical Protection – Built-in safeguards against surges, ESD, and voltage fluctuations help maintain reliable operation in harsh environments.
  8. Industrial-Grade Compact Design– Designed for durability and space-saving installation, supporting DIN-rail and panel mounting options.
Applications:
  1. Factory Automation – Connecting PLCs, sensors, and controllers to centralized SCADA systems over Ethernet or Wi-Fi.
  2. Building Management Systems (BMS) – Integrating HVAC, lighting, and access control devices with IP-based monitoring platforms.
  3. Energy and Utilities – Bridging Modbus RTU meters, solar inverters, and power monitoring equipment to supervisory networks.
  4. Process Control– Linking field instruments and control panels to Ethernet/Wi-Fi networks for real-time monitoring.

Package Includes:

1 x MDIM-485/WL - Single-Port RS485 to Ethernet / WLAN Bridge

Quick specs

Item Type
RS485 to WiFi/Ethernet Communication Gateway
Model No. / Name
RS485 to Ethernet/WiFi Bridge
Voltage Rating (V)
6 to 36
Power Rating
3
Baud Rate (bps)
50 – 921600 bps
Communication Interface
RS485 (Half-duplex)
See all specifications