Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Machifit, this tools, industrial & scientific is a good fit for DIY builders and repair work. Main specs: model ER11; precision <0.012; material Steel.

Key Highlights

  • Model: ER11
  • Precision: <0.012
  • Material: Steel

Ideal For

  • Repairs around the home
  • Electronics bench work
  • Workshop jobs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ModelER11
Precision<0.012
MaterialSteel
Gripping Range1 mm, 1.5 mm, 2 mm, 2.5 mm,3 mm,3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm,6 mm, 6.5 mm, 7 mm, 1/4", 1/8"
Upper Diameter12mm
Bottom Diameter8mm
Height20mm
Quantity15pcs
Model numberER11

Overview

The 15pcs ER11 1-7mm Spring Collet Set for CNC Milling Lathe Tool, made by Machifit, is listed in our tools, industrial & scientific range and suits DIY builders and repair work. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model: ER11
  • Precision: <0.012
  • Material: Steel (affects weight, heat handling and how the part wears)
  • Gripping Range: 1 mm, 1.5 mm, 2 mm, 2.5 mm,3 mm,3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm,6 mm, 6.5 mm, 7 mm, 1/4", 1/8" (quoted range is usually line-of-sight; walls and interference shorten it)
  • Upper Diameter: 12mm
  • Bottom Diameter: 8mm
  • Height: 20mm (measure your mounting space before ordering)
  • Quantity: 15pcs

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Specification:

 

Features:


Ground roughness and overall fine polish.
Special angled slots increase rigidity.
Protects tool holder from contaminants.
Better overall balance of tool holder assembly.
With high precision and strong holding force.
Suitable for boring, milling, drilling, tapping, engraving, CNC, spindle machines, and other processing.

The correct method of mounting the collet nut:
1. Put the chuck into the pressure cap, gently turn the clamp spring, when eccentric portion of the pressure cap recessed clamp spring groove. Along the arrow direction and use equal force to push clamp spring, can mount pressure cap.
2. Put the clamp spring and cap all together installed on the chuck body or spindle. Insert into the clamping hole after wipe the cylindrical shank, use a wrench to tighten the pressure cap, until clip firmly the tool before use .
(Note: Avoid fastening pressure cap that not installed tool, to avoid damage the clamp spring
3. Use a wrench to loosen the pressure cap and took out the chuck or tool, remove the tool. Along the direction of the arrow push out the clamp spring. Then according to need replace other clamp spring.
 

Package Included:
15 x ER11 Collet Chuck


More to search: 



Product Safety Information

Quick specs

Model
ER11
Precision
<0.012
Material
Steel
Gripping Range
1 mm, 1.5 mm, 2 mm, 2.5 mm,3 mm,3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm,6 mm, 6.5 mm, 7 mm, 1/4", 1/8"
Upper Diameter
12mm
Bottom Diameter
8mm
See all specifications

More from Machifit

View all →

Related Products

View all →