Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A wall-mounted LoRaWAN relay node with two HF152F relays for switching AC loads over long distances at low power. Its IP65 housing and wide 100–240V AC input make it suitable for demanding automation and equipment control.

Key Highlights

  • Dual HF152F relays switch two independent AC loads
  • 16A at 250VAC on NO contacts, 7A at 250VAC on NC
  • Wide 100–240V AC input with regulated 5V DC output
  • IP65 wall-mount enclosure for dusty and damp locations
  • Operates from -35 to +60°C for outdoor and plant-room use
  • LoRaWAN connectivity for long-range, low-power control

Ideal For

  • LoRaWAN integrators adding relay control to an existing network
  • Facility and maintenance teams switching lighting or equipment remotely
  • Smart farming projects needing long-range load control
  • Makers and automation engineers building mains switching nodes
  • Energy management installers monitoring and controlling AC loads

Buying Tip

Confirm your load current against the correct contact rating, 16A at 250VAC for normally open and 7A at 250VAC for normally closed, before wiring.

Elecvora expert review

Our verdict

A practical relay node for LoRaWAN installations that need two mains-rated outputs in a sealed wall-mount housing. The wide AC input and 5V output make it easy to integrate where power is available but network cabling is not.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Two independent HF152F relays in one compact unit
  • Wide 100–240V AC input with a regulated 5V output
  • IP65 housing and -35 to +60°C operating range
  • Wall-mount design at 140 x 80 mm and 222 g

Cons

  • Requires an existing LoRaWAN network and gateway in range
  • Normally closed contact is limited to 7A at 250VAC
  • Mains wiring should be handled by a qualified electrician

Best for

Remote switching of lighting and equipment on an existing LoRaWAN network

Not ideal for

Users who need a standalone controller without a LoRaWAN gateway

Specifications

Input Voltage (V)100–240V AC
DC Output Voltage (V)5
CommunicationLoRaWAN
EnclosureIP65
RelayDual HF152F relays
Relay Rating16A @ 250VAC(NO), 7A @ 250VAC(NC)
Mounting StyleWall mounting
Operating Temperature (°C)- 35 to +60
Length (mm)140
Width (mm)80
Weight (g)222
Shipping Weight0.35 kg
Shipping Dimensions22 × 13 × 7 cm

What's in the box

  • 1 x LoRaWAN Smart Relay Controller
  • 1 x User Guide

Frequently Asked Questions

What can the two relays control?
Each HF152F relay switches an independent AC circuit, so you can control two loads separately. Keep the normally open contact within 16A at 250VAC and the normally closed contact within 7A at 250VAC.
Does it need a separate power supply?
No separate supply is required for the controller itself, as it accepts 100–240V AC input directly. It also provides a regulated 5V DC output for auxiliary electronics.
What network does it work with?
The controller communicates over LoRaWAN and is designed to work with standard LoRaWAN gateways and networks. You will need network coverage at the installation site.
Where can it be installed?
The IP65 enclosure and -35 to +60°C operating range suit wall mounting in workshops, plant rooms, outbuildings and agricultural buildings. It should still be installed according to local electrical regulations.
What is included with the controller?
The package contains one LoRaWAN Smart Relay Controller and one user guide. Wiring accessories and a gateway are not included.
How should I look after it?
Keep the enclosure sealed and check cable glands and terminals periodically for moisture or loosening. Isolate the mains supply before opening the housing or servicing the wiring.

Overview

The MACNMAN LoRaWAN Smart Relay Controller is a compact wireless switching module built for automation work where the load is far from the network and the power budget is tight. Two HF152F relays give you independent control of two AC circuits, while a 100–240V AC input means the unit can be fed from standard mains supplies in different regions. Onboard regulation provides a 5V DC output for auxiliary electronics and sensors.

The controller is housed for wall mounting in an IP65 enclosure, so it can be installed in workshops, plant rooms, agricultural buildings and other areas exposed to dust or moisture. It is designed to join an existing LoRaWAN network rather than create its own.

Key Features

  • Dual relay outputs: two HF152F relays allow separate switching of two loads from one node.
  • High current handling: the normally open contact is rated 16A at 250VAC, and the normally closed contact 7A at 250VAC.
  • Flexible supply: accepts 100–240V AC input and delivers a regulated 5V DC output.
  • Protected housing: IP65 enclosure with wall-mount fixing for demanding environments.
  • Wide temperature range: rated for operation from -35 to +60°C.
  • Compact footprint: 140 mm long by 80 mm wide, weighing 222 g.

Specifications Explained

Relay ratings

The 16A at 250VAC rating applies to the normally open contact, so plan your main switching duty around that figure. The normally closed contact is rated 7A at 250VAC, which matters if you intend to keep a load energised by default and switch it off remotely.

Power input and output

With a 100–240V AC input range, the controller can be connected to common mains voltages without a separate step-down supply. The 5V DC output is useful for powering small auxiliary devices at the installation point, but check the current draw of anything you connect against what the module can supply.

Environmental protection

The IP65 enclosure protects against dust ingress and water jets, and the -35 to +60°C operating range covers cold stores, unheated outbuildings and hot plant rooms. Wall mounting keeps wiring tidy and the unit out of the way.

Compatibility and Requirements

The controller communicates over LoRaWAN and is intended to work with standard LoRaWAN gateways and networks. You will need access to a LoRaWAN network in range of the installation, plus suitable mains wiring and an enclosure entry point for your cables. Loads must stay within the relay contact ratings listed above.

Typical Uses

  • Remote switching of lighting circuits in buildings and outbuildings
  • Equipment control in workshops and plant rooms
  • Smart farming installations such as pump or ventilation switching
  • Energy management projects that need scheduled or remote load control
  • Automation builds where a 5V supply is needed at the relay point

What's in the Box

  • 1 x LoRaWAN Smart Relay Controller
  • 1 x User Guide

Quick specs

Input Voltage (V)
100–240V AC
DC Output Voltage (V)
5
Communication
LoRaWAN
Enclosure
IP65
Relay
Dual HF152F relays
Relay Rating
16A @ 250VAC(NO), 7A @ 250VAC(NC)
See all specifications