Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This product is a good fit for everyday home and hobby use. Main specs: product name MKSXDrive; number of drive motors TWO; mos NTMFS5C628NLT1G (60V, 150A), or HYG025N06LS1C2 (60V, 170A) two in parallel. Check that your power source supplies 12~56V before connecting it.

Key Highlights

  • Product name: MKSXDrive
  • Number of drive motors: TWO
  • MOS: NTMFS5C628NLT1G (60V, 150A), or HYG025N06LS1C2 (60V, 170A) two in parallel

Ideal For

  • Robots and moving models
  • Automation projects
  • Replacement for a worn motor

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Product nameMKSXDrive
Number of drive motorsTWO
MOSNTMFS5C628NLT1G (60V, 150A), or HYG025N06LS1C2 (60V, 170A) two in parallel
Onboard SPI encoder/
USB InterfaceType-B
Heat dissipation methodHeat sink
MCUSTM32F405RGT6
Input voltage12~56V
Working current60A
Peak current120A
Motor Type3-phase BLDC motor
Encoder TypeTLE5012B/AS5047/AMT10X...
InterfaceUSB/UART/PWM/CAN/STP,DIR
Movement modePosition/Speed/Torque...
Braking modeResistance/battery recharge

Overview

The MakerbaseMKS XDRIVE 56V High-Precision Brushless Servo Motor Controller Based on ODrv V3.6 Upgrade Development Board is listed in our range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Product name: MKSXDrive
  • Number of drive motors: TWO
  • MOS: NTMFS5C628NLT1G (60V, 150A), or HYG025N06LS1C2 (60V, 170A) two in parallel
  • Onboard SPI encoder: /
  • USB Interface: Type-B (confirm your cable or board uses the same connector)
  • Heat dissipation method: Heat sink
  • MCU: STM32F405RGT6 (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Input voltage: 12~56V (match this to your power supply; too high a voltage can damage the part)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Overview:


MKSXDrive is an open source project based on XDRIVE, and it is compatible with the hardware interface of ODrv V3.6. It supports all features in the 0.5.1 firmware and can be used directly for product development. Can be a great tool for movement development. This is own modified product, but the circuit is the same as the official one. If you mind please do not place an order


Tips: Do not unplug and insert the interface device (USB, encoder, motor, etc.) when the power is on to avoid damage to the motherboard. Github: Click here to open


 

Package includes:


1 x MKSXDrive V3.6 4 x M3*13+6 4 x M3*8+6 1 x Resistance 1 x Power cable 1 x Micro USB Cable 3 x Motor Cable

7 x Heat sink



Product Safety Information

Quick specs

Product name
MKSXDrive
Number of drive motors
TWO
MOS
NTMFS5C628NLT1G (60V, 150A), or HYG025N06LS1C2 (60V, 170A) two in parallel
Onboard SPI encoder
/
USB Interface
Type-B
Heat dissipation method
Heat sink
See all specifications