
1 / 2 · Click to enlarge
At a glance
Made by MAX7219, this display screen is a good fit for makers, students and electronics hobbyists.
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Overview
The MAX7219 Dot Matrix MCU LED Display Control Module Kit With Dupont Cable Geekcrei, made by MAX7219, is listed in our display screen range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Specifications:
A single module can drive an 8 x 8 common cathode lattice
Operating voltage: 5V
Size: 5 x 3.2 x 1.5 cm (L x W x H)
LED color: red
With four screws hole, aperture 3mm
With input and output interfaces, supports multiple modules cascade
Wiring instructions:
1. The module left side as an input port and the output port on the right
2. To control a single module, just connect the input port to the CPU
3. When cascading multiple modules, the input port of the first module connect to the CPU, the output port connect to the input port of the second one, and so on.
In the case of 51 MCU:
VCC → 5V
GND → GND
DIN → P22
CS → P21
CLK → P20
Note:
1. VCC and GND is not reversed, it would burn the chip!
2. When the 51 microcontroller P0 port controlling, must be connected to the pull-up resistor, it is recommended that the resistance of 4.7K--10K
3. Please install lattice into the round hole first, and then insert the round hole to PCB board and weld. Face the side of lattice with words, from left to right pin order is 123456. PCB board 1st pin is square pad!
4.Electrolytic capacitors long-pin as positive, short-pin as negative; ceramic capacitor hsa no positive and negative points
Package included:
1 x LED module
5 x Dupont line (20cm)
,
Explore more
Upgrade Options

8.8 Inch Long Strip LCD Screen 1920*480P HD Driver Board Secondary Monitor AIDA64 Sub Display CPU GPU SSD Information
8.8 Inch USB Secondary Screen Type C Connect NO High Definition Multimedia Interface-compatible Display 1920*480 IPS LCD CPU RAM GPU Monitor Without AIDA64

ESP32 P4 Development Board 10.1 inch Capacitive Touch Screen Onboard ESP32 C6 Supports WiFi Bluetooth Xiaozhi AI








