Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
MaxBotix MB1210 XL-MaxSonar-EZ1 Ultrasonic Sensor — image 1
Hover to zoom
Maxbotix

MaxBotix MB1210 XL-MaxSonar-EZ1 Ultrasonic Sensor

37+ bought in past month
AI Summary
MAXBOTIX Ultrasonic Sensor for everyday users

The MaxBotix MB1210 XL-MaxSonar-EZ1 Ultrasonic Sensor by Maxbotix is a mid-range maxbotix ultrasonic sensor designed for everyday users. It features Model Series: MB12 Series and Model No. / Name: MB1210-000.

₹4,283
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹4,283
Buying tip: A quality investment for dependable performance and premium build quality.
Estimated delivery: 24 Aug7 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Model Series: MB12 Series
Model No. / Name: MB1210-000
Operating Voltage (V): 3.3 to 5.5
Maximum range(M): 7.65
Resolution: 1cm
Read Rate (Hz): 10

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-1410433Category: MAXBOTIX Ultrasonic Sensor

About This Product

The MaxBotix MB1210 XL-MaxSonar-EZ1 Ultrasonic Sensor by Maxbotix is a mid-range maxbotix ultrasonic sensor designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Model Series: MB12 Series
  • Model No. / Name: MB1210-000
  • Operating Voltage (V): 3.3 to 5.5 — works with standard household power
  • Maximum range(M): 7.65 — reliable connection even at a distance
  • Resolution: 1cm
  • Read Rate (Hz): 10 — smooth, flicker-free operation
  • Avg. Current Consumption: 3.4mA
  • Hardware gain: 2000 db

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Features of the MB1210, XL-MaxSonar-EZ1, include centimeter resolution, a great blend of sensitivity as well as side object rejection, short to long-distance detection, range information from 25cm to 765cm, a 10Hz read rate, and various output options: pulse-width, analog voltage, and RS232 serial. This makes the MB1210 a good low-cost starting place for a customer not sure of which XL‑MaxSonar‑EZ sensor to use.

Features:

  1. The small, lightweight module
  2. Designed for easy integration into your project or product
  3. Firmware filtering for better noise tolerance and clutter rejection
  4. Wide and sensitive beam, detects small targets to significant distances

Package Includes:

1 x Maxbotix MB1210-000 XL-MaxSonar-EZ1 Ultrasonic Sensor

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.