
1 / 3 · Click to enlarge
AI Summary
A weather-resistant MaxBotix ultrasonic rangefinder that reports distance as a 4-20mA current loop signal, readable over 5 metres with 1.6 mm resolution. Its IP67 housing and 10-32 VDC input make it easy to drop into industrial level and process monitoring setups.
Key Highlights
- 4-20mA analog current output for industrial control loops
- Measures up to 5 metres with 1.6 mm resolution
- IP67 weather-resistant housing for wet and dusty sites
- Wide 10-32 VDC operating voltage range
- 7.5 Hz read rate for steady level readings
- Rated for -40°C to +65°C operating temperatures
Ideal For
- Process control engineers adding analog level sensing to a PLC
- Maintenance teams monitoring tank and silo fill levels
- Integrators building weather station monitoring systems
- Makers and hobbyists working with 4-20mA industrial loops
Buying Tip
Confirm that your controller or logger has a 4-20mA current input before ordering, since this sensor will not connect directly to a voltage-only analog pin.
Elecvora expert review
Our verdict
The MB7469 is a sensible pick when you need an ultrasonic level sensor that speaks the same 4-20mA language as your control gear. Its sealed housing and wide voltage range make it easy to trust in real installations.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 4-20mA output integrates cleanly with industrial controllers
- IP67 housing handles dust and wet conditions
- Wide 10-32 VDC input range
- Fine 1.6 mm resolution for level tracking
Cons
- 7.5 Hz read rate is not suited to fast-moving targets
- Requires a current-input device, not a simple voltage ADC
- Mounting hardware and cable are not included
Best for
Industrial tank, bin and process level monitoring
Not ideal for
Fast motion tracking or hobby boards with voltage-only inputs
Specifications
| Model Series | MB74 Series |
|---|---|
| Model No. / Name | MB7469-100 |
| Maximum range(M) | 5 |
| Operating Voltage (VDC) | 10V to 32V |
| Resolution | 1.6mm |
| Additional Specs. | Analog Current Output (mA): 4-20mA |
| Read Rate (Hz) | 7.5 |
| Operating Temperature (°C) | -40°C to +65°C (-40°F to +149°F) |
| Weather resistant | IP67 |
| Shipping Weight | 0.185 kg |
| Shipping Dimensions | 21 × 14 × 5 cm |
What's in the box
- 1 x MaxBotix MB7469 4-20mA HR-MaxSonar-WRM Ultrasonic Sensor
Frequently Asked Questions
What output does this sensor provide?
What supply voltage does it need?
How far can it measure?
Can it be used outdoors?
What is included in the package?
How often does it update?
Overview
The MaxBotix MB7469 is part of the MB74 series of ultrasonic rangefinders and is built around a 4-20mA analog current output. Instead of a serial or pulse output, it reports distance as a current loop signal, which is the language most industrial PLCs, controllers and data loggers already understand. That makes it a practical choice when you want to add non-contact distance measurement to an existing process control installation.
It covers a maximum range of 5 metres with 1.6 mm resolution and refreshes at 7.5 Hz. The sensor accepts 10-32 VDC and is sealed to IP67, so it can be mounted where dust, spray or damp conditions are part of daily life. The factory-calibrated beam pattern and high acoustic sensitivity help it hold stable readings in noisy environments.
Key Features
- 4-20mA current output for direct connection to analog inputs on control equipment.
- 5 m maximum range with 1.6 mm resolution for fine-grained level readings.
- IP67 weather resistance to handle outdoor and washdown-adjacent locations.
- 10-32 VDC supply that fits common industrial power arrangements.
- 7.5 Hz read rate suited to slowly changing levels rather than fast motion tracking.
- -40°C to +65°C operating range for cold stores, silos and exposed sites.
Specifications Explained
Range and resolution
A 5 metre maximum range covers most tanks, bins and outdoor monitoring points without mounting the sensor awkwardly high. The 1.6 mm resolution means small changes in level are visible in the output, which is useful when you are tracking fill percentage rather than simply detecting presence.
Current loop output
The 4-20mA signal is proportional to the measured distance and is far less sensitive to voltage drop and electrical interference over long cable runs than a simple analog voltage. Your receiving device needs a matching current input.
Power and environment
Operating from 10-32 VDC gives headroom for unregulated industrial supplies. The IP67 rating protects against dust ingress and temporary immersion, and the -40°C to +65°C temperature rating covers most indoor and sheltered outdoor installations.
Compatibility and Requirements
This sensor requires a DC supply within 10-32 VDC and a receiving device with a 4-20mA current input, such as a PLC analog card or a compatible data logger. Mounting hardware and cabling are not listed in the product data, so plan those separately for your installation.
Typical Uses
- Tank level measurement in process and storage systems
- Bin and silo level monitoring
- Automated process control loops
- Weather station distance and level monitoring
What's in the Box
The package contains 1 x MaxBotix MB7469 4-20mA HR-MaxSonar-WRM ultrasonic sensor.
Quick specs
- Model Series
- MB74 Series
- Model No. / Name
- MB7469-100
- Maximum range(M)
- 5
- Operating Voltage (VDC)
- 10V to 32V
- Resolution
- 1.6mm
- Additional Specs.
- Analog Current Output (mA): 4-20mA


















