Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Mbridge RJ25 Expansion Board connects RJ25 sensor modules to your Micro:bit via Robotbit, adding four ports and an I2C header. It lets you reuse existing RJ25 sensors in MakeCode and KittenBlock without Dupont wiring.

Key Highlights

  • Four RJ25 ports for analogue, digital, and I2C sensors
  • Onboard 4-pin I2C header for 5V I2C modules
  • Works with MakeCode and KittenBlock programming
  • 5V power indicator LED for quick status check
  • Designed as an add-on for Robotbit and Micro:bit
  • Compact board with 9 × 6 × 1 cm shipping size

Ideal For

  • Micro:bit users who already own a Robotbit
  • Makers with RJ25 sensor modules looking to reuse them
  • STEM educators building sensor-based projects
  • Beginners learning MakeCode with block programming
  • Robot builders wanting to add I2C sensors easily

Buying Tip

Remember that this board requires both a Micro:bit and a Robotbit to function, so confirm you have those before purchasing.

Elecvora expert review

Our verdict

The Mbridge RJ25 Expansion Board is a niche but useful add-on for Robotbit owners who want to integrate RJ25 sensors without rewiring. It simplifies connections and works well within MakeCode, though it is not a standalone solution.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Adds four RJ25 ports and an I2C header
  • No Dupont cables needed for RJ25 modules
  • Supports MakeCode and KittenBlock
  • Does not interfere with Robotbit's built-in features

Cons

  • Requires both Micro:bit and Robotbit to operate
  • Limited to 5V modules
  • No mounting holes or enclosure mentioned

Best for

Robotbit owners with RJ25 sensors

Not ideal for

Users without a Robotbit or Micro:bit

Specifications

Item TypeExpansion Board
Interface voltage5V
LED light5V power indicator
SupportedMakecode / kittenblock
power indicator5V
Shipping Weight0.015 kg
Shipping Dimensions9 × 6 × 1 cm

What's in the box

  • 1 x Mbridge RJ25 Expansion Board

Frequently Asked Questions

Can I use the Mbridge board without a Robotbit?
No, the Mbridge board must be used with a Robotbit controller and a Micro:bit. It cannot function independently.
What programming platforms are supported?
The board supports MakeCode and KittenBlock. You will need to add the Mbridge extension in MakeCode to access the relevant blocks.
What types of sensors can I connect?
You can connect RJ25 sensor modules (analogue, digital, or I2C) and 5V I2C modules via the onboard 4-pin header.
Is a power supply included?
No, the package only includes the Mbridge board. Power is supplied through the Robotbit connection.
What is the interface voltage?
The board operates at 5V, and the power indicator LED also runs at 5V.
What are the shipping dimensions and weight?
The shipping dimensions are 9 × 6 × 1 cm, and the shipping weight is 0.015 kg.

Overview

The Mbridge RJ25 Expansion Board is a compact add-on designed to bridge RJ25 sensor modules with the Micro:bit ecosystem. It plugs into a Robotbit controller and provides four RJ25 ports plus an onboard 4-pin I2C header, allowing you to connect a wide range of sensors without soldering or custom cables. The board is intended for users who already own a Micro:bit and Robotbit and want to expand their projects with RJ25 modules.

Key Features

  • Four RJ25 ports: PORT1, PORT2, and PORT3 support analogue sensors; all four ports support digital and I2C sensors, giving you flexibility across module types.
  • Onboard I2C header: A 4-pin header lets you connect 5V I2C modules directly.
  • MakeCode and KittenBlock support: Program with familiar block-based tools using the Mbridge extension.
  • Power indicator: A 5V LED shows when the board is powered.
  • Coexists with Robotbit features: Using Mbridge does not consume programming resources for RGB lights, motors, or servos on the Robotbit.

Specifications Explained

The 5V interface voltage matches common RJ25 and I2C modules, so you can connect compatible sensors directly. The four RJ25 ports are colour-coded for different signal types: black-marked modules for analogue on PORT1–PORT3, yellow and blue-marked modules for digital on all four ports, and white-marked modules for I2C on all four ports. The onboard 4-pin I2C header offers an additional connection point for 5V I2C devices. The 5V power indicator gives a simple visual confirmation that the board is receiving power.

Compatibility and Requirements

The Mbridge board is compatible with Micro:bit and must be used with a Robotbit controller; it cannot operate on its own. It supports MakeCode and KittenBlock programming environments. The board is designed for RJ25 sensor modules and 5V I2C modules. No additional Dupont cables are required for RJ25 connections.

Typical Uses

This expansion board is ideal for classroom projects, robotics builds, and DIY sensor experiments where RJ25 modules are already available. Use it to add analogue, digital, or I2C sensors to your Robotbit-based robot without changing your existing setup. It is also useful for quickly prototyping with MakeCode blocks and the Mbridge extension.

What's in the Box

Package includes: 1 x Mbridge RJ25 Expansion Board.

Quick specs

Item Type
Expansion Board
Interface voltage
5V
LED light
5V power indicator
Supported
Makecode / kittenblock
power indicator
5V
Shipping Weight
0.015 kg
See all specifications