Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact MC34063A DC-DC converter module that accepts 3.6V to 36V input and provides positive and negative voltage outputs. Its 27 x 13mm board and reverse voltage protection make it easy to add dual-rail power to small DIY and embedded projects.

Key Highlights

  • MC34063A controller for positive and negative voltage output
  • Wide 3.6V to 36V DC input range
  • Reverse voltage protection for safer wiring
  • Compact 27 x 13mm board weighing about 4g
  • Suited to DIY electronics and development work
  • Tool-free, easy replacement installation

Ideal For

  • Electronics hobbyists building custom power rails
  • Students learning DC-DC conversion and prototyping
  • Engineers integrating compact converters into embedded designs
  • Makers repairing or modifying small electronic devices

Buying Tip

Check that your DC source stays within the 3.6V to 36V input range and plan how you will set the output voltages before soldering the module into your circuit.

Elecvora expert review

Our verdict

A tiny, affordable converter board that gives DIY builders access to both positive and negative rails from a wide input range. It is best treated as a component to integrate and test carefully rather than a finished power supply.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Supports both positive and negative voltage outputs
  • Wide 3.6V to 36V input range
  • Very compact and lightweight board
  • Includes reverse voltage protection

Cons

  • Requires wiring and soldering into your project
  • Output voltage must be configured for your circuit
  • No enclosure, cables or connectors included

Best for

Compact DIY and embedded projects needing dual-rail DC conversion

Not ideal for

Users wanting a finished plug-and-play power supply

Specifications

Item TypePositive Voltage Negative Voltage Module
Model No. / NameMC34063A
Input Voltage3.6V – 36V
Output TypePositive and Negative Voltage
ProtectionReverse Voltage Protection
Module TypeDC-DC Converter Module
ApplicationSuitable for DIY and electronics development
Length (mm)27
Width (mm)13
Weight (g)04
Sensor TypeStrain Gauge Based Load Cell
Operating Voltage (V)2.7~5.5
Dimensions (L x W x H) mm170 x 130 x 130
InstallationTool-Free, Easy Replacement
Shipping Weight0.006 kg
Shipping Dimensions10 × 8 × 3 cm

What's in the box

  • 1 x MC34063A DC-DC 3.6V-36V Positive Voltage Negative Voltage Module

Frequently Asked Questions

What input voltage does this module accept?
It accepts DC input from 3.6V to 36V. Keep your source within that range to avoid problems.
Does it provide both positive and negative outputs?
Yes, the module is designed for positive and negative voltage output from a single input.
Is reverse voltage protection included?
Yes, the board includes reverse voltage protection to help reduce damage from incorrect polarity.
What is included with the module?
The package contains one MC34063A DC-DC 3.6V-36V positive and negative voltage module. No other accessories are listed.
How big is the board?
The module measures 27mm long and 13mm wide and weighs about 4 grams.
Can I use it in a finished product?
It is intended for DIY and electronics development, so it should be integrated and tested within your own design.

Overview

The MC34063A DC-DC module is a small converter board built around the MC34063A controller. It accepts a DC input from 3.6V to 36V and provides both positive and negative voltage outputs, making it useful when a project needs more than one rail from a single source. At 27mm long and 13mm wide, with a weight of roughly 4 grams, it takes up very little room on a prototype or inside a compact enclosure.

Reverse voltage protection is included to reduce the risk of damage if wiring polarity is reversed. The module is intended for DIY and electronics development, where a flexible, space-saving converter is more useful than a fixed, finished power supply.

Key Features

  • Dual output polarity: provides both positive and negative voltage outputs from one input.
  • Broad input range: operates from 3.6V up to 36V DC.
  • Reverse voltage protection: helps protect the circuit against incorrect polarity connections.
  • Compact footprint: 27mm x 13mm board suits tight layouts.
  • Lightweight: approximately 4g, so it adds minimal bulk.
  • Development friendly: designed for DIY and electronics development work.

Specifications Explained

Input voltage (3.6V-36V): this is the DC range the module is designed to accept. Confirm your source sits within these limits before connecting it.

Output type (positive and negative): the board can supply rails of both polarities, which is helpful for circuits that need a split supply. The exact output voltage depends on how the module is configured in your circuit.

Reverse voltage protection: this feature is intended to limit damage from reversed input polarity, but it is not a substitute for careful wiring.

Size and weight: at 27mm x 13mm and about 4g, the module is easy to place in small builds and lightweight assemblies.

Compatibility and Requirements

The module works with DC input sources within the 3.6V to 36V range. It is a bare converter board for electronics work, so you should expect to solder or wire it into your project and provide your own input source and connections. No enclosure, cables or connectors are listed in the product data.

Typical Uses

  • Prototyping dual-rail power for analog and digital circuits
  • Embedded systems and microcontroller projects needing a compact converter
  • DIY electronics experiments and student coursework
  • Repair and custom builds where a small regulation board is useful

What's in the Box

1 x MC34063A DC-DC 3.6V-36V Positive Voltage Negative Voltage Module.

Quick specs

Item Type
Positive Voltage Negative Voltage Module
Model No. / Name
MC34063A
Input Voltage
3.6V – 36V
Output Type
Positive and Negative Voltage
Protection
Reverse Voltage Protection
Module Type
DC-DC Converter Module
See all specifications