
1 / 4 · Click to enlarge
AI Summary
A transparent acrylic shell that protects your BBC Micro:bit mainboard while keeping its ports and switches accessible. Four acrylic parts plus screws and nuts make fitting quick and tool-light.
Key Highlights
- Transparent acrylic construction shows the board underneath
- Four-part shell secured with included screws and nuts
- Slim 77 x 32 mm footprint adds minimal bulk
- Weighs about 17 g for near-weightless protection
- Ports and switches stay accessible after fitting
- Protective film peels off for a clear finish
Ideal For
- Classroom and STEM teachers sharing Micro:bit boards between students
- Hobbyists building Micro:bit projects that travel or get stored
- Beginners who want simple protection without a bulky enclosure
- Makers displaying a Micro:bit board on a desk or workbench
Buying Tip
Peel the protective film off every acrylic part before assembly, and tighten the screws gently since acrylic can crack under excess force.
Elecvora expert review
Our verdict
A straightforward, low-cost way to add a clear protective layer to a Micro:bit board. It keeps the board visible and usable while guarding against everyday scuffs and dust.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Clear acrylic keeps the board visible
- Screws and nuts included for assembly
- Ports and switches remain accessible
- Compact and very light at about 17 g
Cons
- Acrylic can crack if screws are overtightened or the case is dropped
- Micro:bit mainboard is not included
- Protective film must be removed before the case looks clear
Best for
Keeping a Micro:bit board protected and visible in classrooms and hobby projects
Not ideal for
Anyone needing a rugged, impact-resistant enclosure
Specifications
| Item Type | Case |
|---|---|
| Material | Acrylic |
| Length (mm) | 77 |
| Width (mm) | 32 |
| Weight (g) | 17 |
| Color | Transparent |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 7.7 × 3.2 × 2.5 cm |
What's in the box
- 1 x Micro:bit acrylic case (four acrylic parts)
- Screws and nuts for assembly
Frequently Asked Questions
Does the package include a Micro:bit board?
Why does the acrylic look cloudy out of the box?
Will I still be able to reach the ports and switches?
How is the case assembled?
How much weight does the case add?
How should I care for the acrylic case?
Overview
The Generic Micro:bit Acrylic Transparent Case is a protective enclosure designed specifically for the BBC Micro:bit mainboard. It gives the board a rigid outer layer that takes the bumps, scratches and dust of daily handling, so the electronics underneath stay cleaner and safer. Because the acrylic is transparent, you can still see the board and its components while it is fitted.
The case is supplied as four acrylic parts with matching screws and nuts. You place the board between the pieces and screw them together; the design leaves the ports and switches fully accessible, so the Micro:bit remains usable for programming, wiring and project work. A protective film covers the acrylic in transit and should be peeled away before use to reveal the clear finish.
Key Features
- Clear acrylic shell: protects the mainboard without hiding it.
- Screw-together assembly: four parts fixed with the supplied screws and nuts.
- Access-friendly design: ports and switches stay reachable once fitted.
- Compact dimensions: 77 mm long and 32 mm wide.
- Lightweight: approximately 17 g, so it barely changes the feel of your setup.
- Protective film: peel it off for a clean, transparent look.
Specifications Explained
Material: acrylic gives the case a clear, rigid structure. It is a little fragile, so handle the parts carefully during fitting and avoid dropping the assembled case.
Size: at 77 mm by 32 mm, the shell is shaped around the Micro:bit board and adds only a thin layer of protection. Shipping dimensions of 7.7 x 3.2 x 2.5 cm reflect the compact packed size.
Weight: the case itself is about 17 g and the shipping weight is 0.02 kg, so it will not weigh down a project or a bag.
Colour: transparent, letting you inspect the board and its connections at a glance.
Compatibility and Requirements
This case is intended for the BBC Micro:bit mainboard. The mainboard is not included, so you will need your own Micro:bit board to fit inside. Assembly uses the supplied screws and nuts; no other parts are listed in the package.
Typical Uses
Useful for classroom sets where boards are passed between students, for hobby projects that travel in bags, and for any setup where you want the Micro:bit visible but shielded from scratches and dust.
What's in the Box
- 1 x Micro:bit acrylic case, four acrylic parts
- Screws and nuts for assembly
Quick specs
- Item Type
- Case
- Material
- Acrylic
- Length (mm)
- 77
- Width (mm)
- 32
- Weight (g)
- 17
- Color
- Transparent














